Industry & Manfacturing lubricants

TOTAL BIOHYDRAN SE 68

High thermal stability biodegradable hydraulic fluid

Applications TOTAL BIOHYDRAN SE 68

• Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
• The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc

Your advantage! Price of TOTAL BIOHYDRAN SE 68 drops automatically in larger quantities.

RENOLIN UNISYN CLP 680

Fully-synthetic industrial gear lubricants based on polyalphaolefins

RENOLIN UNISYN CLP 680 field of applications:

The oils of the RENOLIN UNISYN CLP series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears, worm gears and planetary gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150 °C.

Please note!! Price of RENOLIN UNISYN CLP 680 drops automatically in larger quantities.

Synthetic industrial gear oil 680 (ISO VG)

Mobil SHC Gear 680 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 680 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 680 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 680 drops automatically with higher volumes.

Castrol Perfecto HTS 16

Synthetic heat transfer fluid

Application Castrol Perfecto HTS 16

Perfecto HTS 16 is suitable for heat transfer systems without pressure operating in liquid phase with bulk temperatures up to 350°C, where the film temperature may not exceed 370°C. In order to extend the economic life of the liquid, the temperature of the expansion vessel must be kept below 50°C. The temperature of the expansion vessel must be kept at a maximum of 370°C. At higher temperatures it is advisable to use a nitrogen blanket. Detailed information can be found in the brochure which contains data on specific heat and thermal conductivity, among other things.

Your advantage! Price of Castrol Perfecto HTS 16 drops automatically in larger quantities.

Castrol Perfecto HTS 16

Synthetic heat transfer fluid

Application Castrol Perfecto HTS 16

Perfecto HTS 16 is suitable for heat transfer systems without pressure operating in liquid phase with bulk temperatures up to 350°C, where the film temperature may not exceed 370°C. In order to extend the economic life of the liquid, the temperature of the expansion vessel must be kept below 50°C. The temperature of the expansion vessel must be kept at a maximum of 370°C. At higher temperatures it is advisable to use a nitrogen blanket. Detailed information can be found in the brochure which contains data on specific heat and thermal conductivity, among other things.

Your advantage! Price of Castrol Perfecto HTS 16 drops automatically in larger quantities.