Industry & Manfacturing lubricants

TOTAL DACNIS LD 32

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 32

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 32 drops automatically in larger quantities.

RENOLIN MR 20 VG 68

Special lubricating and hydraulic fluids with excellent corrosion protection

RENOLIN MR 20 VG 68 field of applications:

RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.

Please note!! Price of RENOLIN MR 20 VG 68 drops automatically in larger quantities.

CASTROL HYSPIN DSP 22

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 22

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 22 drops automatically in larger quantities.

CASTROL HYSPIN DSP 22

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 22

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 22 drops automatically in larger quantities.

CASTROL ALPHA SP 680

Gear oils DIN CLP 680

Application CASTROL ALPHA SP 680

The Alpha SP 680 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. Castrol Alpha SP 680 may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions.

The additives in Alpha SP 680 are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 680 is compatible with the most common types of seal materials.

Alpha SP 680 is classified as follows: DIN Classification is CLP 680.

Your advantage! Price of CASTROL ALPHA SP 680 drops automatically in larger quantities.

CASTROL RUSTILO DWX 10

Dewatering fluid

Application CASTROL DWX 10

Rustilo DWX 10 rapidly removes water from components subsequent to electroplating processes, after machining using soluble cutting fluids, or parts that have been washed. Rustilo DWX 10 specifically can be used for the treatment of surfaces which cannot be subjected to heat to accelerate drying, and also avoids the formation of water spots upon polished or plated components. Although Rustilo DWX 10 can be applied by spraying, its dewatering action is most effective if articles to be dried can be immersed in a dip tank.

Your advantage! Price of CASTROL RUSTILO DWX 10 drops automatically in larger quantities.

Castrol Honilo 980

Non-water miscible premium cooling lubricant

Application Castrol Honilo 980

Castrol Honilo 980 has been specially developed for honing ferrous and non-ferrous metals. The product has also proven itself in the general machining of aluminium and non-ferrous metals.

CASTROL SPHEEROL LC

Long-term Grease

Application CASTROL SPHEEROL LC

Due to its high load carrying capacity and its water resistance Spheerol LZ is suited for the universal use in building site operations and in all transport devices. In addition it can be used in machines of the agricultural and forestry sector and also for demanding grease lubrication points in industrial gearboxes. Spheerol LZ is particularly suited for highly loaded rolling and plain bearings in a wet and dusty environment (e.g. universal joints, wheel hubs, sprockets, steering racks, etc.). The temperature range for this grease lies between - 20 °C and + 120 °C (for a short time even 130°C).

Your advantage! Price of CASTROL SPHEEROL LZ drops automatically in larger quantities.

Mobilube S 80W-90

High-quality, heavy-duty oils for gearboxes

for heavily loaded transmission components in road transport, commercial vehicles and passenger cars

Mobilube S 80W-90 is recommended by ExxonMobil for use in applications where API GL-4 / GL-5 is required. < / p>

The main applications of Mobilube S 80W-90 are:

Recommended by ExxonMobil for:

• Passenger cars, light and heavy road transport, buses and vans.
• Heavy vehicle drive lines that require API GL-4 / GL-5 level.

RENISO C85E

Refrigeration oils for CO2 compressors

RENISO C85E field of applications:

The RENISO C refrigeration oils were specifically developed for use in refrigeration systems that are run on carbon dioxide refrigerant. Due to their favourable miscibility properties, sufficient oil reflux is ensured at low evaporation temperatures in particular. The areas of application are in practically all fields of industrial and commercial refrigeration, e.g. walk-in freezer units and aggregate cooling systems.

Please note!! Price of RENISO C85E drops automatically in larger quantities.

TOTAL CARTER EP 1500

Viscous semi-synthetic oils for enclosed gears.

Applications TOTAL CARTER EP 1500

The viscous CARTER EP oils have been specially designed for lubricating enclosed gears operating under severe conditions:

• heavy loads
• slow to very slow moving parts
• shocks
• High temperatures

Your advantage! Price of TOTAL CARTER EP 1500 drops automatically in larger quantities.

Fuchs Renolin EP 220, previously RENOLIN CLP 220

Heavy duty - EP 220 - industrial gear oils of highest performance, outstanding extreme pressure characteristics and load carrying capacity

Renolin EP 220 field of applications:

The RENOLIN EP 220 oils are recommended for industrial spur-, helical- and bevel enclosed gears with circulation or splash lubrication, operating at oil temperatures up to 100ºC and peaks above (up to 120ºC).

CASTROL VARIOCUT C 335

High performance neat cutting oil

Application CASTROL VARIOCUT VARIOCUT C 335

Variocut C 335 is designed for general machining of high alloyed steel. It is also suitable for broaching and gear cutting of medium alloyed steel. Variocut C 335 contains active sulphur and is not compatible with yellow metals

Your advantage! Price of CASTROL VARIOCUT C 335 drops automatically in larger quantities.

TOTAL FINAVESTAN A 520 B

Vegetable demoulding oil for high temperatures.

Applications TOTAL FINAVESTAN A 520 B

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:

• Polymers: plasticizers & external lubricants for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
• Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
• Paper: cut and slit lubricant.
• Dust binder, defoamer, furniture polishes.

The following applications are subject to applicable laws and regulations in each country:

• Demoulding agent, defoamer and protective film in food industry
• Lubricants additive for food industry (Accidental food contact)
• Food processing aid (direct food contact).

• CAS number: 8042-47-5
• EINECS number: 232-455-8
• INCI number (EU): Paraffinum Liquidum.

Your advantage! Price of TOTAL FINAVESTAN A 520 B drops automatically in larger quantities.

Shell Tellus S4 ME 32 Previous Name: Tellus EE

Advanced Synthetic Industrial Hydraulic Fluid

Shell Tellus S4 ME 32 main applications:

• Industrial hydraulic systems
• Mobile hydraulic systems
• Environmental impact

Shell Tellus S4 ME 32 hydraulic fluids are designed to help users improve the energy efficiency of their hydraulic systems without compromising the protection of the system or maintenance procedures of their equipment and operations. Shell Tellus S4 ME 32 has been demonstrated to improve energy efficiency in a wide range of applications such as plastic injection moulding, metal pressing, and mining conveyors. In addition, Shell Tellus S4 ME 32 is also designed to help equipment service life and lower maintenance costs through providing outstanding wear protection and long oil life capability

Please note!! Price of Shell Tellus S4 ME 32 drops automatically in larger quantities.

Performance, Features & Benefits of TOTAL FINAVESTAN A 50 B are:

Health, Safety & Environment of TOTAL FINAVESTAN A 50 B

Health and Safety

TOTAL FINAVESTAN A 50 B Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet

Protect the Environment

Take used TOTAL FFINAVESTAN A 50 B to an authorised collection point. Do not discharge into drains, soil or water.

Typical Physical Characteristics

TOTAL EQUIVIS XV 46

Very high viscosity index anti-wear hydraulic oils with high shear resistance.

Applications TOTAL EQUIVIS XV 46

• Equivis XV is a range of anti-wear hydraulic fluids recommended for all kind of hydraulic circuits operating within a very wide temperature range.
• Their excellent viscosimetric properties and their high shear resistance make the oils especially suitable for the use in mobile machines hydraulic systems intended for cold regions or which have to work in low temperature environments such as cold stores.

Your advantage! Price of TOTAL EQUIVIS XV 46 drops automatically in larger quantities.

CASTROL HYSPIN HVI 46 D

Detergent Hydraulic Oil

Application CASTROL HYSPIN HVI 46 D

Castrol Hyspin HVI 46 D also incorporates lubricity additives to give smooth slideway motion on the combined hydraulic and slideway lubrication systems of some grinding and gear cutting machine tools. Castrol HLP-D fluids contain detergency additives which maintain dirt and oil oxidation products in suspension, preventing them from settling out and forming deposits which could impair the free operation of valves, leading to erratic system operation. Machine tool manufacturer's are increasingly specifying HLP-D fluids such as Hyspin HVI 46 D, having recognised their advantages in increased system reliability.

Your advantage! Price of CASTROL HYSPIN HVI 46 D drops automatically in larger quantities.

MASTERSOL CT1

Rod and Tube Drawing Lubricant for Copper and Copper Alloys

MASTERSOL CT1 field of applications:

The product is primarily recommended for drawing operations on copper, brass and brass alloy rod or tubes using either recirculation or dip tank application techniques.

Please note!! Price of MASTERSOL CT1 drops automatically in larger quantities.