Buy Lubricants — mineral, synthetic, dry & adhesive

Aeroshell Oil W 15W-50

Semi-synthetic lubricating oil for aircraft piston engines.

Application Aeroshell Oil W 15W-50

AeroShell Oil W 15W-50 is intended for use in certified fourstroke cycle aircraft piston engines. AeroShell Oil W 15W-50 is superior to single grade oils in almost every application. It offers easier starting, better lubrication after start-up, reduced wear, reduced corrosion and rusting, and improved cleanliness with oil pressures and temperatures equal to that of single grade SAE 50 oils at fully warmed up conditions. The anti-corrosion additive system is designed to prevent rust or corrosion in all types of aircraft piston engines. In comparative testing of camshaft rusting under high humidity conditions, AeroShell Oil W 15W-50 was almost entirely rust free while other camshafts conditioned on other oils showed sometimes heavy rusting on cam lobes and bearing surfaces.These results indicate that AeroShell Oil W 15W-50 can provide maximum anti-corrosion protection for aircraft piston engines, when combined with proper maintenance practices and proper operating conditions. Because of the improved flow characteristics of AeroShell Oil W 15W-50, operators may observe slightly lower oil temperatures in some aircraft. On larger aircraft, the oil cooler flap will normally compensate for this change. However, in small aircraft, oil temperature could be reduced slightly. Operators should always check the oil temperature to ensure that they are in the range specified by the manufacturer. Most manufacturers recommend cruising oil temperatures between 82 to 930C (180 to 2000 F). Oil temperatures significantly below this range can result in excessive water and fuel contamination in the crankcase.

Shell Tellus S2 V100 (Formerly Shell Tellus T100) has been improved and is now called Shell Tellus S2 VX100 !

Hydraulic oil ISO VG100 with a wide temperature range

Examples of application of Shell Tellus S2 VX 100 are:

• + Hydraulic excavators and other earthmoving equipment
• + Port cranes and lifting equipment such as forklifts
• + Hydraulic driven equipment on board ships
• + Any mobile exterior hydraulic system

Shell Tellus S2 VX 100 fluids are high-performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures. Shell Tellus S2 VX 100 resist breakdown under heat or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.

Pay attention! Shell Tellus S2 VX100 Price falls automatically for larger quantities.

Castrol GTX 10W40

This oil is specially engineered to prevent the harmful build-up of sludge, reduce oil deposits and provide daily protection for your engine.

It is a semi synthetic oil which cools, cleans and protects the engine.

Approvals

ACEA A3/B4
API SL/CF
MB-Approval 229.1
VW 501 01Castrol GTX 10W-40

Mobil Agri Super 15W-40

STOU oil for tractors with extra high performance

Super Tractor Oil Universal (STOU) oil

Mobil Agri Super 15W-40 is a high-quality, multifunctional lubricating oil for most agricultural applications. This STOU lubricant offers good performance in diesel and gasoline engines , transmissions , hydraulics , final drives and submerged wet brakes used in agriculture. Mobil Agri Super is recommended for use in a large number of heavy applications and business environments in the agricultural sector.

Key applications of mobil Agri Super 15W-40 are:

• + Diesel and petrol engines
• + Transmissions
• + Final drives
• + Wet brakes
• + Hydraulics

Mobil Agri Super 15W-40 lubricant is recommended for use in a wide range of extreme operating conditions in the agricultural sector.

Please note ! Price mobil Agri Super 15W-40 drops automatically with larger quantities.

Delvac Legend 15W40 Agri Universal  previously Mobil Agri Super 15W40

Super Tractor Oil Universal (STOU) Lubricant

Application Mobil Agri Super 15W40

Mixed diesel and gasoline-powered farm vehicles and equipment. Farm equipment transmissions and power systems requiring multifunctional fluid

Shell Spirax S3 TLV

Premium, Low Viscosity SAE 5W-20, Tractor Transmission and Hydraulic Oil

Application Shell Spirax S3 TLV

Suitable for applications allowing SAE 5W-20 oil in transmission, wet brake and hydraulic systems particularly designed for tractors and ancillary equipment.

Tractors and other equipment using a common fluid to lubricate the transmission, differential and hydraulic systems.

Caterpillar powershift transmissions requiring a TO-2 Fluid.

Mobile equipment using Sundstrand hydrostatic transmissions

Mobile and industrial hydraulic systems operating over a wide temperature range.

Mobil Pegasus™ 710

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus™ 710 are:

• + Spark ignited four-cycle gas engines with very low oil consumption
• + Engines experiencing valve train wear and corrosion
• + Engines operating on fuel containing low levels of sulphur and chlorine compounds
• + Reciprocating compressor cylinders compressing natural gas
• + High output or ambient rated engines operating at or in excess of rated capacity under high temperatures

Pay attention! Price of Mobil Pegasus™ 710 drops automatically with higher volumes.

Klübersynth GH 6-220

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-220

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Shell Rimula R6 M 10W-40

Fully synthetic 'Heavy Duty' Low SAPS Diesel engine oil

Benefits of Shell Rimula R6 M 10W-40 are:

• + Savings on maintenance
• + Lower maintenance costs (very long oil change intervals)
• + Low wear - long engine life

Shell Rimula R6 M 10W-40 full synthetic oil provides continuous protection resulting in extended oil change intervals, protection against wear caused by soot and deposits on the pistons and engine, and fuel saving. Shell Rimula R6 M 10W-40 is suitable for most Euro 4 and Euro 5 engines without a particulate filter.

Note ! Price Shell Rimula R6 M 10W-40 drops automatically with larger quantities.

Shell Rimula R6 MS 10W-40 (E7/LDF-3)

Synthetic Heavy Duty Diesel Engine Oil

Shell Rimula R6 MS 10W-40 (E7/LDF-3) main applications:

• On-highway Heavy Duty Applications
• Low Emission Engine Use

Shell Rimula R6 MS 10W40 features advanced multi-functional additive technology in fully synthetic base oil systems to deliver highly responsive protection that continuously adapts to your driving conditions. Protection is further enhanced though formulation synergies that enhance the activity of the oil resulting in maintenance saving long drain performance coupled with excellent protection against soot induced wear, piston and engine deposits and fuel economy capability. Shell Rimula R6 MS 10W40 is suitable for most Euro IV and Euro V engines without Diesel Particle Filter as well as Euro VI engines of Scania.

Please note!! Price of Shell Rimula R6 MS 10W-40 (E7/LDF-3) drops automatically in larger quantities.

Shell Helix Ultra Professional AJ-L 5W-30 formerly AF-L 5W-30

Fully synthetic engine oil - Developed to meet the specific requirements of the engine manufacturer.

Key applications of Shell Helix Ultra Professional AJ-L 5W-30 include:

• + Shell Helix Ultra Professional AJ-L for diesel engines is approved according to the technically challenging "in-house" approved according to the demanding technical Jaguar Land Rover motor oil specification STJLR.03.5005.
  
  

Developed to meet the strict requirements of high-performance engines, including Ford, Jaguar, and Mazda, and engines that require oil with ACEA C1 specification.

Q8 Rubens WB /b

Lithium complex extreme pressure grease

Applications Q8 Rubens WB /b

Q8 Rubens WB/b is used in industrial and automotive applications. It is highly recommended for heavily loaded plain- and anti-friction bearings, bushings and pins in industrial applications, off-highway equipment, construction equipment, automotive equipment (Volvo standard 97720), marine applications and agriculture equipment.

Your advantage! Price of Q8 Rubens WB /b drops automatically in larger quantities.

Mobil DTE Light

High-quality circulation lubricants

Applications of Mobil DTE Light are:

• + Recirculating lubrication systems for steam turbines on land and shipping, water turbines and some gas turbines, including pumps, valves and other auxiliary equipment
• + Continuous use in flat and roller bearings and in straight gears
• + Turbines with immersion, oil bath and ring lubrication systems and other mechanical means
• + Moly-loaded hydraulic pumps
• + Compressor and vacuum pumps for air, natural gas and inert gas when the temperatures on the pressure side 150& deg; C not exceed
  
  

The Mobil DTE Light is a premium product for circulation lubrication. They have been specially developed for steam and hydroturbation systems, but also for other systems that require a long lifetime of the lubricant. These products are formulated with very refined bases and an additive system, the combination of which is high. of chemical and thermal stability. In addition, they have a fast water wash capacity and high protection against emulsification.

Your advantage: Price of Mobil DTE Light drops automatically with higher volumes.

Mobil DTE Heavy-Medium

High quality circulation lubricants

Applications of Mobil DTE Heavy-Medium are:

• + Recirculating lubrication systems for land and marine steam turbines, water turbines and some gas turbines, including pumps, valves and other auxiliary equipment
• + Continuous use in plain and roller bearings and in spur gears
• + Turbines with immersion, oil bath and ring lubrication systems and other mechanical means
• + Moly-loaded hydraulic pumps
• + Compressor and vacuum pumps for air, natural gas and inert gas when the pressure side temperatures do not exceed 150°C
  
  

The Mobil DTE Heavy-Medium is a premium product for circulation lubrication. They have been specially developed for steam and hydroturbation systems, as well as for other systems that require a long lubricant life. These products are formulated with highly refined bases and an additive system, the combination of which is high. of chemical and thermal stability. In addition, they have a fast Wasserab separating capacity and a high protection against emulsification.

CASTROL HYSPIN DSP 32

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 32

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 32 drops automatically in larger quantities.

Mobil Vactra No2

Slideway oil

The Mobil Vactra Oil Number 2 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No2 are:

• + Mobil Vactra Oil Nr. 2 are recommended for horizontal guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No2 drops automatically with larger quantities.

Mobil Vactra No 4

Slideway oil

The Mobil Vactra Oil Number 4 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No 4 are:

• + Mobil Vactra Oil No 4 are recommended for vertical guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No 4 drops automatically with larger quantities.

Mobil Vactra No 1

Horizontal Slideway oil

The Mobil Vactra Oil Number 1 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No 1 are:

• + Mobil Vactra Oil No 1 are recommended for horizontal guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No 1 drops automatically with larger quantities.

Mobil Vactra No 3

Vertical Slideway oil

The Mobil Vactra Oil Number 3 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No 3 are:

• + Mobil Vactra Oil No 3 are recommended for vertical guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No 3 drops automatically with larger quantities.

Spirax S3 T Previous Name: Shell Harvella T 15W-40

Premium Performance, SAE 15W-40, Universal Tractor Oil

Spirax S3 T main applications:

• Universal performance
• Oil immersed brakes
• Powershift Transmissions
• Hydraulics
• Power Steering Systems
• Hydrostatic Transmissions
• Conventional Gear Drive Systems

Shell Spirax S3 T Oil is 'Super Tractor Oil Universal' (STOU) oil designed for use in a wide variety of modern agricultural equipment. They are a blend of high viscosity index base oils and an advanced additive package designed to give reliable performance in a wide range of farming applications.

Please note!! Price of Spirax S3 T drops automatically in larger quantities.