Lubricants

TOTAL EQUIVIS ZS 46

High viscosity index anti-wear hydraulic oils.

Applications TOTAL EQUIVIS ZS 46

• EQUIVIS ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature
• Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS ZS 46 drops automatically in larger quantities.

Shell Corena S2 P 100 Previously Corena P100

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 100 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 100 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 100 drops automatically with larger quantities.

Shell Nautilus Premium Outboard 2T

Premium 2-stroke oil for outboard motors

Application Shell Nautilus Premium Outboard 2T

All two-stroke gasoline outboard engines with or without separate oil tanks

TOTAL AZOLLA VTR 32

Hydraulic transmission fluid for turbo transmissions.

Applications TOTAL AZOLLA VTR 32

• AZOLLA VTR 32 is formulated for the use in turbo-transmissions with hydraulic couplings, converters and retarders and for the lubrication of all included mechanical parts : bearings and gearboxes. Especially designed for the use in VOITH TURBO transmissions.
• AZOLLA VTR 32 can be also used as a high performance hydraulic oil, with well balanced detergent and dispersant properties.

Your advantage! Price of TOTAL AZOLLA VTR 32 drops automatically in larger quantities.

Castrol GTX 10W40

This oil is specially engineered to prevent the harmful build-up of sludge, reduce oil deposits and provide daily protection for your engine.

It is a semi synthetic oil which cools, cleans and protects the engine.

Approvals

ACEA A3/B4
API SL/CF
MB-Approval 229.1
VW 501 01Castrol GTX 10W-40

Shell Spirax MB 90

High-quality axle gear oil for high loads

Shell Spirax MB 90 is a high pressure gear lubricant with multifunctional additives for good wear resistance, oxidation stability and corrosion protection. It is equally suitable for transmissions operating under severe load-speed conditions as well as for medium and low speeds when using straight, helical and spirax-toothed gears and hypoid axle drives.

Properties of Shell Spirax MB 90 are:

• + Full Protection
• + Specially selected additives ensure oxidation stability, wear and corrosion protection.

Key Applications

Shell Spirax MB 90 transmits the requirements of Mercedes-Benz and ZF.

Be aware! Price Shell Spirax MB 90 automatically fills with larger quantities.

Shell Helix Ultra ECT C2/C3 0W-30

Fully synthetic motor oil - Shell's ultimate protection for vehicle emission systems

Shell Helix Ultra ECT C2/C3 0W-30 main applications:

• Shell Helix Ultra ECT C2/C3's fully synthetic formulation uses Shell’s most advanced emissions-compatible technology to help gasoline engine exhaust catalysts and keep diesel particulate filters clean and protects it from ash build-up that can block the exhaust system and lead to reduced engine performance.
• Shell Helix Ultra ECT C2/C3 can be used for modern gasoline engines, diesel engines with particulate filters and gas engines
• Shell Helix Ultra ECT C2/C3 0W-30 is suitable for use in vehicles currently using SAE 5W-30 or 10W-30 grades, providing enhanced engine protection and fuel economy
   

Shell Helix Ultra ECT C2/C3 0W30 features its most advanced emissions-compatible technology that helps to keep diesel particulate filters clean to help maintain engine performance. It helps to reduce engine friction to provide enhanced fuel economy.

Please note!! Price of Shell Helix Ultra ECT C2/C3 0W-30 drops automatically in larger quantities.

CASTROL HYSPIN DSP 32

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 32

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 32 drops automatically in larger quantities.

TOTAL AZOLLA DZF 32

Detergent anti-wear hydraulic oils.

Applications TOTAL AZOLLA DZF 32

• Any hydraulic circuits where significant amounts of water are unavoidably introduced and when it is impossible to drain off the water (for instance on circuits that work around the clock).
• Any hydraulic circuits working under loaded conditions : lubrication of stamping presses for example (Müller Weingarten approval).
• Any hydraulic circuits subjected to high levels of pollution.

Your advantage! Price of TOTAL AZOLLA DZF 32 drops automatically in larger quantities.

CASTROL Transmax Agri MP Plus 10W-40

Super universal tractor oil

Your advantage! Price of CASTROL Transmax Agri MP Plus 10W-40 drops automatically in larger quantities.

TOTAL EQUIVIS AF 32

High viscosity index hydraulic oils.

Applications TOTAL EQUIVIS AF 32

EQUIVIS AF is a “zinc-free” high performance hydraulic fluid for:

• all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points).
• hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature (-30°C) and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS AF 32 drops automatically in larger quantities.

TOTAL MULTIS EP 3

Multi purpose extreme pressure lithium/calcium grease.

Applications TOTAL MULTIS EP 3

• MULTIS EP 3 is a true multi purpose grease, formulated for lubrication of loaded slide-,ball-, and roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.
• Suitable as general purpose grease for industrial applications requiring a NLGI 3 grade extreme Pressure grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL MULTIS EP 3 drops automatically in larger quantities.

Aeroshell Oil W 15W-50

Semi-synthetic lubricating oil for aircraft piston engines.

Application Aeroshell Oil W 15W-50

AeroShell Oil W 15W-50 is intended for use in certified fourstroke cycle aircraft piston engines. AeroShell Oil W 15W-50 is superior to single grade oils in almost every application. It offers easier starting, better lubrication after start-up, reduced wear, reduced corrosion and rusting, and improved cleanliness with oil pressures and temperatures equal to that of single grade SAE 50 oils at fully warmed up conditions. The anti-corrosion additive system is designed to prevent rust or corrosion in all types of aircraft piston engines. In comparative testing of camshaft rusting under high humidity conditions, AeroShell Oil W 15W-50 was almost entirely rust free while other camshafts conditioned on other oils showed sometimes heavy rusting on cam lobes and bearing surfaces.These results indicate that AeroShell Oil W 15W-50 can provide maximum anti-corrosion protection for aircraft piston engines, when combined with proper maintenance practices and proper operating conditions. Because of the improved flow characteristics of AeroShell Oil W 15W-50, operators may observe slightly lower oil temperatures in some aircraft. On larger aircraft, the oil cooler flap will normally compensate for this change. However, in small aircraft, oil temperature could be reduced slightly. Operators should always check the oil temperature to ensure that they are in the range specified by the manufacturer. Most manufacturers recommend cruising oil temperatures between 82 to 930C (180 to 2000 F). Oil temperatures significantly below this range can result in excessive water and fuel contamination in the crankcase.

TOTAL MULTIS COMPLEX HV 2

Multi purpose extreme pressure high temperature lithium complex grease

Applications TOTAL MULTIS COMPLEX HV 2

• MULTIS COMPLEX HV 2 is designed for the lubrication of various applications in all types of operating conditions, but particularly where the loads and operation temperature are high and the use of conventional lithium greases is limited.
• MULTIS COMPLEX HV 2 is a true multi purpose grease, formulated for lubrication of loaded slide-,ball-, and roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road vehicles.
• Suitable as general purpose grease for industrial applications requiring a NLGI 2 grade medium high viscosity Extreme Pressure grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL MULTIS COMPLEX HV 2 drops automatically in larger quantities.

Castrol Edge 5W-30 C3

Application of Castrol EDGE 5W-30 C3

Castrol EDGE 5W-30 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant. Castrol EDGE 5W-30 C3 is recommended and approved for use in vehicles from leading OEMs, please refer to the specifications section and your owners handbook.

Specifications

• ACEA C3 / API SN / CF High performance shear stable petrol/diesel engine oil
• Dexos2®
• MB 229.31 & MB 229.51
• Renault RN 0700 / RN 0710; 
• Vauxhall GM-LL-A-025; GM-LL-B-025
• GB2E0209082
• VW 502.00 / VW 505.00 / VW 505.01

Mobilgear 600 XP 460

Mobil Gear Oils

Mobil Gear Oils

Most important applications of Mobilgear 600 XP 460 are:

• + Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• + Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• + Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds.
• + Mobilgear 600 XP 460 is approved by Siemens AG for use in Flender gearboxes

Shell Helix Ultra Racing 10W-60 

Fully synthetic motor oil - Shell's most advanced formulation for high-performance engines

Shell Helix Ultra Racing 10W-60 main applications:

• Extreme-performance engines and racing conditions can cause excessive wear of bearings and other engine components. Shell Helix Ultra Racing has been formulated with a higher viscosity to provide exceptional bearing protection under extreme performance and racing conditions compared with lower viscosity oils.
• Shell Helix Ultra Racing is designed for modified engines and racing engines using gasoline, diesel and gas, and it is also suitable for biodiesel and gasoline/ethanol blends.
   

Designed to meet the demanding requirements of particular high-performance engines, including those requiring API SN or ACEA A3/B4.

Please note!! Price of Shell Helix Ultra Racing 10W-60 drops automatically in larger quantities.

Total Nateria MP 40

New generation low ash lubricant, specifically developed to extend oil drain interval, and to protect natural gas engines.

Applications Total Nateria MP 40

• Lubrication of engines requiring a Low Ash oil, in power generation plants, with or without cogeneration.
• Developed for the most severe conditions: fast engines, high temperatures, small oil sump capacity

Shell Diala S4 ZX-I previous Shell Diala B, S2 ZX-I

Premium insulating oil based on Shell GTL technology for transformers

Advantages of the Diala S4 ZX-I are:

• + High Performance, excellent heat transfer and dielectric properties
• + High Oxidation Stability
• + Resistance to the effects of ageing, sludge formation and deposit build-up

Shell Diala S4 ZX-I is Shell's premium insulating oil. It has been designed to meet the needs of the latest transformer generation. The product offers a longer oil life. It is sulfur free and therefore meets existing and future copper corrosion tests. Shell Diala S4 ZX-I is made from a sulfur-free base oil produced using the Shell GTL (Gas-to-liquids) technology. 
We also know that it is used as Immersion Cooling Fluid for cooling servers as used in cloud computing, blockchain and crypto mining.
This base oil is characterized by a uniform molecular structure and a very good response of antioxidants. It is globally available and independent of different crude oil deposits due to its manufacturing process. Shell Diala S4 ZX-I is free of PCB, DBDS and Passivators.

RENOLIN MR 10 VG 32

Special lubricating and hydraulic fluids with excellent corrosion protection

RENOLIN MR 10 VG 32 field of applications:

RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.

Please note!! Price of RENOLIN MR 10 VG 32 drops automatically in larger quantities.