Shell Heat Transfer Fluid S2

Shell Heat Transfer Oil S2 Performance, Features & Benefits:

• + Extended maintenance intervals
• + System efficiency
• + Wear protection

Performance, Features & Benefits of Shell Heat Transfer Oil S2

+ Extended maintenance intervals

Shell Heat Transfer Oil S2 is based on carefully selected highly refined mineral oils and resists oil cracking, oxidation and thickening. This provides extended oil life, provided efficient fluid heating and good pump circulation is ensured, such that film temperatures on the heater surface do not exceed the limits above.

+ System efficiency

Low viscosity enables excellent fluidity and heat transfer over a wide temperature range. Shell Heat Transfer Oil S2 also has a low vapour pressure so resists cracking. This minimises the formation of volatile decomposition products; these would require recovery via expansion chamber and condensate collector.

+ Wear protection

Shell Heat Transfer Oil S2 is non-corrosive and has high solvency – this reduces deposit formation by holding oxidation products in solution and keeping internal surfaces of heat exchangers clean.

If you have any questions, please contact OlieOnline Technical Helpdesk

Health, Safety & Environment of Shell Heat Transfer Oil S2

Health and Safety

Shell Heat Transfer Oil S2 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Heat Transfer Oil S2 to an authorised collection point. Do not discharge into drains, soil or water. 

Typical Physical Characteristics of Shell Heat Transfer Oil S2