Compressor

Mobil Rarus SHC 1024

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1024 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1024 drops automatically with larger quantities.

Mobil Rarus SHC 1025

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1025 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1025 drops automatically with larger quantities.

Mobil Rarus SHC 1026

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1026 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1026 drops automatically with larger quantities.

Mobil Gargoyle Arctic SHC NH 68

Synthetic Lubricant for refrigeration compressors - Ammonia applications

Application Mobil Gargoyle Arctic SHC NH 68

Mobil Gargoyle Arctic SHC NH 68 is recommended for use in screw or reciprocating refrigerationcompressors, in plants using ammonia as refrigerating fluid.Mobil Gargoyle Arctic SHC NH 68 is compatible with mineral lubricants, however, in case ofswitch over, performances or benefits may be minimized, depending on the ratio of mineral oilremaining in the blend. In such case, a specific oil analysis follow up with control of filters should be handled in the following 6 months accordingly.

Mobil Rarus™ 827

Compressor oil for piston compressors

Main applications of Mobil Rarus ™ 827 are:

• + All types of air compressors, but specifically recommended for a reciprocating air compressor
• + Units that work under severe conditions
• + Multistage units with a history of excessive oil degradation of products based on mineral oil
• + They can be used for the lubrication of cylinders and crankcases
• + Compressor systems with critical gears and bearings
• + Compressors used in stationary and mobile applications

The Mobil Rarus 800 series oils are recommended for single and multi-stage air compressors, but are not recommended for air compressors used in compressed air applications. They are particularly effective for continuously high temperatures with discharge temperatures of up to 200ºC. 

Pay attention! Price Mobil Rarus ™ 827 drops automatically with larger quantities.

CASTROL Aircol SR 46

Synthetic air compressor lubricant

Application CASTROL Aircol SR 46

Aircol SR is suitable for use in oil flooded rotary screw compressors and is classified as follows: DIN 51506 classification- VDL; ISO 6743/3-DAG, DAH and DAJ for rotary air compressors. Aircol SR grades meet the requirements of: Atlas Copco 8000 hour oil drain interval; Kaeser

Klüber Summit SH 46

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 46

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Mobil Gas Compressor

Gas Compressor Oil

Application Mobil Gas Compressor

Liquefied petroleum gases such as propane and butane. Liquefied natural gases such as methane and ethane. Hydrocarbon chemical gases such as ethylene, propylene and butylene. Chemical gases such as ammonia, vinyl chloride monomer and butadiene.

CASTROL Aircol SN 68

Synthetic Air Compressor Lubricant

Application CASTROL Aircol SN 68

Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

Mobil Rarus™ 829

Compressor oil for piston compressors

Main applications of Mobil Rarus ™ 829 are:

• + All types of air compressors, but specifically recommended for a reciprocating air compressor
• + Units that work under severe conditions
• + Multistage units with a history of excessive oil degradation of products based on mineral oil
• + They can be used for the lubrication of cylinders and crankcases
• + Compressor systems with critical gears and bearings
• + Compressors used in stationary and mobile applications

The Mobil Rarus 829 oils are recommended for single and multi-stage air compressors but are not recommended for air compressors used in compressed breathing air applications. They are particularly effective for continuously high temperatures with discharge temperatures of up to 200ºC. 

Pay attention! Price Mobil Rarus ™ 829 drops automatically with larger quantities.

CASTROL Aircol SN 100

Synthetic Air Compressor Lubricant

Application CASTROL Aircol SN 100

Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

Klüber Summit SH 32

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 32

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

RENISO TRITON SE 55

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SE 55 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SE 55 drops automatically in larger quantities.

RENISO TRITON SEZ 32

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SEZ 32 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SEZ 32 drops automatically in larger quantities.

RENISO PG 68

RENISO PG 68 field of applications:

RENISO PG 68 and GL 68 are ultra-dried, synthetic refrigeration oils based on PAG NH3 systems which operate on the principle of direct expansion. They differ in their miscibility with NH3. Suitable for screw and reciprocating piston compressors. RENISO PG 68 and GL 68 are also recommended for the use with hydrocarbon refrigerants.

Please note!! Price of RENISO PG 68 drops automatically in larger quantities.

Klüber Summit PS 400

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 400

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Klüber Summit SH 68

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 68

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber Summit PS 200

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 200

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.