Construction Lubricants

Previous Mobil Delvac XHP ESP 10W-40

Vehicle Lube Motor oil

Mobil Delvac XHP ESP M 10W40 is a synthetic extra high-performance engine oil for modern diesel engines designed in heavy transport & contracting applications.

Most important applications of Mobil Delvac XHP ESP M 10W-40 are:

• + Heavy Duty Diesel Engines including Euro V/VI Modern Low Emissions Vehicles, Utilizing Technologies such as DPF, SCR, CRT, DOC and EGR
• + Heavy Duty Diesel Engines using low sulfur diesel fuels and many biodiesel fuel formulations
• + Naturally Aspirated and Turbo-Charged Diesel Powered Equipment
• + On-Highway Short-Haul and Long-Haul Trucks and Buses
• + Off-Highway Mining, Construction and Agricultural Equipment
   

Pay attention! Price of Mobil Delvac XHP ESP M 10W-40 drops automatically with higher volumes.

Shell Rimula R6 M 10W-40

Fully synthetic 'Heavy Duty' Low SAPS Diesel engine oil

Benefits of Shell Rimula R6 M 10W-40 are:

• + Savings on maintenance
• + Lower maintenance costs (very long oil change intervals)
• + Low wear - long engine life

Shell Rimula R6 M 10W-40 full synthetic oil provides continuous protection resulting in extended oil change intervals, protection against wear caused by soot and deposits on the pistons and engine, and fuel saving. Shell Rimula R6 M 10W-40 is suitable for most Euro 4 and Euro 5 engines without a particulate filter.

Note ! Price Shell Rimula R6 M 10W-40 drops automatically with larger quantities.

CASTROL CRB Monograde 10W

Monograde proCRB for commercial vehicles and equipment

Application CASTROL CRB Monograde 10W

The primary application of Castrol CRB Monograde 10W is in diesel engines, hydraulic systems and transmissions that specify the use of a monograde diesel engine oil.

Your advantage! Price of CASTROL CRB Monograde 10W drops automatically in larger quantities.

Shell Spirax S4 ATF HDX Previous Name: Shell Donax TX

Advanced Synthetic Technology Heavy Duty Automatic Transmission Fluid

Spirax S4 ATF HDX main applications:

• Automotive automatic transmissions
• Automotive hydraulic systems
• Power steering
• Certain manual transmissions

Shell Spirax S4 ATF HDX is a superior quality automatic transmission fluid suitable for a wide range of heavy duty automotive transport and passenger car transmissions. Based on synthetic technology base fluid, Spirax S4 ATF HDX is the ultimate performance automatic transmission fluid allowing extended drain intervals even under the most severe conditions.

Please note!! Price of Spirax S4 ATF HDX drops automatically in larger quantities.

Total Rubia TIR 7400 10W-40

Semi-synthetic diesel- and gasoline-engine oil for on-road applications (heavy duties or passenger cars).

Applications Total Rubia TIR 7400 10W-40

• Total Rubia TIR 7400 10W-40 is a multi-purpose lubricant especially suitable for all diesel and gasoline engines (passenger cars, heavy duties…).
• It is recommended to Euro 3, and previous engines of most European and American manufacturers. It is also adapted to Euro 5 and previous engines of some manufacturers with appropriate oil drain intervals.
• Thus Total Rubia TIR 7400 10W-40 is adapted to fleets of mixed gasoline and diesel engines with adapted oil drain intervals.

Shell Rimula R6 MS 10W-40 (E7/LDF-3)

Synthetic Heavy Duty Diesel Engine Oil

Shell Rimula R6 MS 10W-40 (E7/LDF-3) main applications:

• On-highway Heavy Duty Applications
• Low Emission Engine Use

Shell Rimula R6 MS 10W40 features advanced multi-functional additive technology in fully synthetic base oil systems to deliver highly responsive protection that continuously adapts to your driving conditions. Protection is further enhanced though formulation synergies that enhance the activity of the oil resulting in maintenance saving long drain performance coupled with excellent protection against soot induced wear, piston and engine deposits and fuel economy capability. Shell Rimula R6 MS 10W40 is suitable for most Euro IV and Euro V engines without Diesel Particle Filter as well as Euro VI engines of Scania.

Please note!! Price of Shell Rimula R6 MS 10W-40 (E7/LDF-3) drops automatically in larger quantities.

Shell Tellus S3 V 46 Previous Name: Tellus STX

Premium Zinc-Free Industrial Hydraulic Fluid for very wide temperature range

Shell Tellus S3 V 46 main applications:

• Mobile/exterior hydraulic applications
• Precision hydraulic systems
• Environmental impact

Shell Tellus S3 V 46 hydraulic fluids are high performance lubricants that use exclusive ashless technology, coupled with highly shear stable viscosity modifiers. Shell Tellus S3 V 46 give excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide temperature range. Shell Tellus S3 V 46 provide outstanding protection and performance in most mobile equipment and other applications subjected to a wide range of ambient or operating temperatures.

Please note!! Price of Shell Tellus S3 V 46 drops automatically in larger quantities.

Shell Tellus S3 V 68 Previous Name: Tellus STX

Premium Zinc-Free Industrial Hydraulic Fluid for very wide temperature range

Shell Tellus S3 V 68 main applications:

• Mobile/exterior hydraulic applications
• Precision hydraulic systems
• Environmental impact

Shell Tellus S3 V 68 hydraulic fluids are high performance lubricants that use exclusive ashless technology, coupled with highly shear stable viscosity modifiers. 
Shell Tellus S3 V68 give excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures. 
Shell Tellus S3 V 68 provide outstanding protection and performance in most mobile equipment and other applications subjected to a wide range of ambient or operating temperatures.

Please note!! Price of Shell Tellus S3 V 68 drops automatically in larger quantities.

Total Rubia SX 10W

Monograde engine oil

Applications Total Rubia SX 10W

• Monograde engine oil for the lubrication of diesel engines in stationary plants, power generators and locomotives.
• RUBIA SX can be used as a monograde oil in gearboxes, torque converters, final drives and hydraulic systems.

Total Rubia S 20W-20

Mineral lubricant suitable for hydraulic applications.

Applications Total Rubia S 20W-20

• TOTAL RUBIA S 20W-20 is a mineral lubricant recommended for hydraulic systems and transmissions.
• This lubricant is particularly adapted to on-road and off-road applications: construction, mining, agriculture.

Total Rubia Optima 1100 15W-40 previous Total Rubia TIR 7900 15W-40

Mineral lubricant for diesel engines, suitable for use in on road applications, with “lowSAPS” technology

Applications Total Rubia TIR 7900 15W-40

• Total Rubia Optima 1100 15W-40 is adapted to on-road diesel technologies (heavy-duty, urban transport, delivery…). It is also compatible with certain gas engines.
• With its “low-SAPS” (low sulphated ash, phosphorus and sulphur) technology, Total Rubia Optima 1100 15W-40 protects diesel engines equipped with post-treatment systems such as diesel particulate filters (DPFs).
• Total Rubia Optima 1100 15W-40 is suitable for Euro 6 (and previous) Renault Trucks and Volvo engines and for most other manufacturers up to Euro 5.
• Total Rubia Optima 1100 15W-40 enables coverage of a fleet of mixed brands, with a minimal number of products.

Total Rubia WORKS 3000 10W-40

Low SAPS engine oil for construction machinery and industrial diesel engines

Applications Total Rubia WORKS 3000 10W-40

• Synthetic high-performance engine oil especially recommended for diesel engines of German manufacturers that meet the US EPA Tier 4 final or European Stage IV emissions standard and require a lubricant of the ACEA E6 and API CJ-4 specification.
• The product has been adapted to the heavy-duty operating conditions in earthmoving, handling and construction machinery.
• RUBIA WORKS 3000 allows the oil change interval to be extended up to 1000 hours if the construction machinery manufacturer allows it and the operation is monitored by oil analysis.

Total Rubia WORKS 4000 10W-40

“Low SAPS” lubricant especially developed for earthmoving, mining and quarries machinery engines

Applications Total Rubia WORKS 4000 10W-40

• TOTAL RUBIA WORKS 4000 10W-40 is especially suitable for engines used in Off-Road activities (quarries, construction, mining, railroads…) requesting API CK-4 or CJ-4 level. Thanks to its numerous approvals, it can be used also in “On-road” truck engines.
• This lubricant withstands very long working periods under severe conditions and high load, with dust and heat.
• TOTAL RUBIA WORKS 4000 10W-40 is recommended for engines equipped with Exhaust gas after-treatment system meeting EURO Stage V (or US EPA Tier 4F) Standard and, for On-Road, EURO 6, as well as previous standards. TOTAL RUBIA WORKS 4000 10W-40 is particularly suitable for American, European and Japanese engines.
• Thanks to its specific “low-SAPS” technology (low content of Sulphated Ash, Phosphorus and Sulphur), TOTAL RUBIA WORKS 4000 10W-40 is designed for the latest Diesel engines equipped with post-treatment systems, such as Diesel particulate filters (DPF) or DENOX catalysator.

Shell Spirax S4 CX 30 Previous Name: Shell Donax TC 30

High performance off-highway transmission and hydraulic oil

Spirax S4 CX 30 main applications:

• Shell Spirax S4 CX 30 is recommended for use in heavy duty off-highway equipment produced by the world’s leading manufaturers including; Caterpillar, Komatsu, Komatsu-Dresser and in transmissions manufactured by Eaton, Eaton Fuller, ZF, Dana, Rockwell amongst others:
• Powershift transmissions
• Final drives
• Oil immersed brakes
• Hydraulic systems

Shell Spirax S4 CX 30 is designed to provide operators with trouble free operation and maximum reliability for the lifetime of the equipment. Spirax S4 CX meets the demanding requirements of modern transmission, final drive, oil immersed brake and hydraulic systems fitted to heavy-duty off-highway.

Please note!! Price of Spirax S4 CX 30 drops automatically in larger quantities.

Shell Spirax S4 TX Previous Name: Shell Harvella TX 10W-40

Premium Performance, SAE 10W-40, Universal Tractor Oil

Spirax S4 TX main applications:

• Universal performance - suitable for many types of tractor transmission/hydraulic systems
• Oil immersed brakes
• Powershift transmissions
• Hydraulics
• Power steering systems
• Hydrostatic transmissions
• Conventional gear drive systems

Shell Spirax S4 TX Oil is 'Super Tractor Oil Universal' (STOU) oil based on Shell’s XHVI base oil technology and an advanced additive package. Spirax S4 TX gives superior performance in engine, transmission and hydraulic applications for a wide range of agricultural equipment and applications.

Please note!! Price of Spirax S4 TX drops automatically in larger quantities.

Castrol CRB Multi 15W-40 CI-4

For long and healthy engine life

Your advantage! Price of Castrol CRB Multi 15W-40 CI-4 drops automatically in larger quantities.

Castrol CRB Turbomax 10W-40 E4/E7

Reliable protection for heavy duty engines

Your advantage! Price of Castrol CRB Turbomax 10W-40 E4/E7 drops automatically in larger quantities.

Spirax S3 AX 80W-90 Previous Name: Shell Spirax S3 AX 80W-90

High Performance, GL-5 Axle Oil for General Applications

Spirax S3 AX 80W-90 main applications:

• Automotive differentials
• General gear sets

Shell Spirax S3 AX 80W-90 is a high performance, API GL-5 gear and axle oil for moderate to heavily loaded on and off-road driveline applications requiring SAE 80W-90 oil.

Please note!! Price of Spirax S3 AX 80W-90 drops automatically in larger quantities.

Shell Spirax S1 ATF TASA Previous Name: Shell Donax TM

Quality Type A Suffix A Automatic Transmission and Hydraulic Fluid

Shell Spirax S1 ATF TASA main applications:

• Powershift and Industrial torque convertors
• Applications calling for a GM Type 'A' Suffix 'A' performance fluid
   

Please note!! Price of Shell Spirax S1 ATF TASA drops automatically in larger quantities.

Shell Spirax S2 A 85W-140 Previous Name: Shell Spirax A 85W-140

High quality, GL-5 axle oil

Shell Spirax S2 A 85W-140 main applications:

• Automotive transmissions, differentials
• Moderate to heavily loaded gear sets in stationary and ancillary equipment
• Hypoid gear axles
• Motorcycle gear units separate from the engine

Shell Spirax S2 A 85W-140 is blended for use in a wide variety of automotive axle units subjected to heavy-duty conditions.

Please note!! Price of Shell Spirax S2 A 85W-140 drops automatically in larger quantities.