Your sector

CASTROL ALPHASYN T 68

Synthetic gear & hydraulic lubricant

Application CASTROL ALPHASYN T 68

Alphasyn T grades have been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy / shock loaded systems. Alphasyn T is also suitable for the lubrication of bearings and circulatory systems operating at high temperatures and various high temperature applications such as in hydraulic systems and for the lubrication of large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity/temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range are fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification CL

Alphasyn T grades meet the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 68 drops automatically in larger quantities.

CASTROL ALPHASYN PG 220

Synthetic heavy duty (PAG) EP gear oils

Application CASTROL ALPHASYN PG 220

The Alphasyn PG range of gear oils are primarily intended for use in worm reduction gearboxes where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG basestock provides inherently high viscosity index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM's that allow the use of PAG based gear oils

Your advantage! Price of CASTROL ALPHASYN PG 220 drops automatically in larger quantities.

CASTROL ALPHASYN PG 220

Synthetic heavy duty (PAG) EP gear oils

Application CASTROL ALPHASYN PG 220

The Alphasyn PG range of gear oils are primarily intended for use in worm reduction gearboxes where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG basestock provides inherently high viscosity index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM's that allow the use of PAG based gear oils

Your advantage! Price of CASTROL ALPHASYN PG 220 drops automatically in larger quantities.

CASTROL ALPHASYN T 220

Synthetic Gear Oil

Application CASTROL ALPHASYN T 220

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 220 drops automatically in larger quantities.

CASTROL ALPHASYN T 320

Synthetic Gear Oil

Application CASTROL ALPHASYN T 320

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 320 drops automatically in larger quantities.

CASTROL ALPHASYN T 320

Synthetic Gear Oil

Application CASTROL ALPHASYN T 320

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 320 drops automatically in larger quantities.

CASTROL ALPHASYN T 220

Synthetic Gear Oil

Application CASTROL ALPHASYN T 220

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 220 drops automatically in larger quantities.

GEARMASTER LXG 00

Synthetic oil-based, semi-fluid gear grease

GEARMASTER LXG 00 field of applications:

GEARMASTER LXG 00 is used for high-performance gearboxes. The product is compatible with seals and does not affect yellow metals and aluminium. It is suitable for the use in central lubrication systems of commercial vehicles and as a sealing grease in shock absorbers.

GEARMASTER LXG 00 method of applications:

Gearboxes can be filled with GEARMASTER LXG 00 manually or by central filling systems. Please observe the manufacturers’ recommendations concerning filling capacities.

Please note!! Price of GEARMASTER LXG 00 drops automatically in larger quantities.

TOTAL NEVASTANE CHAIN OIL XT

High-temperature synthetic chain oil, suitable for incidental food contact

Applications TOTAL NEVASTANE CHAIN OIL XT

• NEVASTANE CHAIN OIL XT is a high performance chain oil specially designed for the lubrication of any control, drive and transport chains subject to high temperatures and loads in the food industries: bakeries, slaughterhouses, beverage industries, etc
• NEVASTANE CHAIN OIL XT is suitable for temperature up to 260 °C.

Your advantage! Price of TOTAL NEVASTANE CHAIN OIL XT drops automatically in larger quantities.

RENOLIN UNISYN XT 220 previous RENOLIN UNISYN CLP 220

Fully-synthetic industrial gear lubricants based on polyalphaolefins

RENOLIN UNISYN XT 220 field of applications:

The oils of the RENOLIN UNISYN XT series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears, worm gears and planetary gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150 °C.

TOTAL CARTER SH 680

Synthetic oil (PAO) for enclosed gears.

Applications TOTAL CARTER SH 680

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.

• bevel and spur gears
• Heavily loaded bearings and gear couplings.

Your advantage! Price of TOTAL CARTER SH 680 drops automatically in larger quantities.

CASTROL Alphasyn PG 460

Synthetic gear oils

Application CASTROL Alphasyn PG 460

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.

CASTROL Alphasyn PG 460

Synthetic gear oils

Application CASTROL Alphasyn PG 460

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.

Synthetic industrial gear oil 150 (ISO VG)

Mobil SHC Gear 150 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 150 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 150 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 150 drops automatically with higher volumes.

Synthetic industrial gear oil 220 (ISO VG)

Mobil SHC Gear 220 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 220 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 220 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 220 drops automatically with higher volumes.

Synthetic industrial gear oil 320 (ISO VG)

Mobil SHC Gear 320 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 320 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 320 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 320 drops automatically with higher volumes.

Synthetic industrial gear oil 460 (ISO VG)

Mobil SHC Gear 460 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 460 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 460 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 460 drops automatically with higher volumes.

CASTROL ALPHASYN EP 320

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 320

The Alphasyn EP 320 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 320 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 320 drops automatically in larger quantities.

CASTROL ALPHASYN EP 320

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 320

The Alphasyn EP 320 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 320 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 320 drops automatically in larger quantities.

CASTROL ALPHASYN EP 460

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 460

The Alphasyn EP 460 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 460 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 460 drops automatically in larger quantities.