Industry & Manfacturing lubricants

STABYL MO 500

Multi-purpose grease containing solid lubricants, with good EP properties

STABYL MO 500 field of applications:

STABYL MO 500 is used for the lubrication of any kind of plain and roller bearings subjected to high constant mechanical loads, increased themperatures and unfavourable friction conditions, e.g. in general engineering, in the chemical, iron, steel, construction machinery, including slew ring raceway/toothing, and automotive industries.

STABYL MO 500 method of applications:

STABYL MO 500 is applied manually with suitable grease guns or via centralized lubrication systems.

Please note!! Price of STABYL MO 500 drops automatically in larger quantities.

Mobil Pegasus 1

Synthetic gas engine oil designed to meet the highest performance

Main applications of Mobil Pegasus 1 are:

• Mobil Pegasus 1 is recommended for a wide range of gas engine models
• The product is particularly suited for high speed, four-cycle turbocharged and naturally aspirated gas engines requiring a nominal 0.5% ash gas engine oil.
• It is an excellent lubricant for both stoichiometric and lean-burn designs
• It is ideally suited for cogeneration and ebullient cooled applications because of its wide temperature range capability and extended engine protection and long oil life.
• Mobil Pegasus 1 is fully compatible with all seals commonly used in gas engines and with mineral oils but admixture with mineral oils will lower the performance benefits that can be obtained from this outstanding lubricant
• May be used with gas engines using alternative energy sources for fuel gas containing up to 0.3% sulphur as hydrogen sulphide
  
  

Your benefit : Price Mobil Pegasus 1 automatically drops with larger quantities.

Shell Gadus S2 U460L 2 Previous Name: Darina Grease R 2

High Performance Heavy Duty Grease

Shell Gadus S2 U460L 2 main applications:

• Recommended for use in bearings operating in the temperature range -10° C to 180° C.
• Shell Gadus S2 U460L Grease gives good service life in many applications where expensive synthetic or silicone lubricants would otherwise be considered.
• The special high viscosity base oil in Shell Gadus S2 U460L Grease makes it particularly suitable for the grease lubrication of heavily loaded slow speed bearings.
• With caution, Shell Gadus S2 U460L Grease may be used at temperatures in excess of 200° C, but only so long as the relubrication period is suitably adjusted.

Please note!! Price of Shell Gadus S2 U460L 2 drops automatically in larger quantities.

LAGERMEISTER WHS 2002

White high-performance EP grease

LAGERMEISTER WHS 2002 field of applications:

Due to its excellent adhesion and EP properties, LAGERMEISTER WHS 2002 is recommended for the lubrication of plain and roller bearings operating in harsh conditions (e.g. dust, water, vibration etc.). For manual or central relubrication operations on machines in conveying technology including construction machinery, cranes (Telescopic cranes), processing plants in the raw materials, chemical and engineering industries.

LAGERMEISTER WHS 2002 method of applications:

LAGERMEISTER WHS 2002 can be applied manually, with a brush or via SYSTEM REINER grease guns. Also available in aerosol cans as LAGERMEISTER WHS 2002 SPRAY and as LAGERMEISTER WHS 2002 FLUID for application using a spray pistol, roller or brush.

Shell Omala S4 WE 460 Previous Name: Shell Tivela S 460

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 WE 460 main applications:

• Enclosed industrial worm gear systems
• Extended life systems
• Other applications

Shell Omala S4 WE 460 is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.

Pay attention! Price of Shell Omala S4 WE 460 drops automatically in larger quantities.

Castrol Transmax Universal LL 80W-90 previously Syntrax Universal 80W-90

Universal fluid for manual transmissions and axles

Castrol Spheerol LCX 222

Multi-purpose grease

Application Castrol Spheerol LCX 222

Spheerol LCX 222 is a NLGI 2 grade heavy duty grease, recommended for industrial bearings in severe applications and provide protection against: Shocks and vibrations. Water washout, water ingress. Corrosive environment, as in mill applications

Your advantage! Price of Castrol Spheerol LCX 222 drops automatically in larger quantities.

CASTROL RUSTILO DWX 10

Dewatering fluid

Application CASTROL DWX 10

Rustilo DWX 10 rapidly removes water from components subsequent to electroplating processes, after machining using soluble cutting fluids, or parts that have been washed. Rustilo DWX 10 specifically can be used for the treatment of surfaces which cannot be subjected to heat to accelerate drying, and also avoids the formation of water spots upon polished or plated components. Although Rustilo DWX 10 can be applied by spraying, its dewatering action is most effective if articles to be dried can be immersed in a dip tank.

Your advantage! Price of CASTROL RUSTILO DWX 10 drops automatically in larger quantities.

CASTROL Transmax Axle Long Life 75W-90 previously Syntrax Long Life 75W-90

Axle Fluid - Multivehicle

Castrol Hysol SL 37 XBB

High performance semi-synthetic metalworking fluid

Application Castrol Hysol SL 37 XBB

Hysol SL 37 XBB is especially designed for machining of cast iron and low-medium alloyed steel.

Your advantage! Price of Castrol Hysol SL 37 XBB drops automatically in larger quantities.

RENOLIT S 2

RENOLIT S 2 field of applications:

Due to its low dynamic friction, RENOLIT S 2 is recommended for the lubrication of small, high-speed rolling and plain bearings, even precision bearings, if the operating speed is higher than the speed limit for grease lubrication specified by the rolling bearing manufacturer, even at low and very different temperatures.

Please note!! Price of RENOLIT S 2 drops automatically in larger quantities.

TOTAL CARTER SG 680 previous Carter SY 680

Ultra high performance synthetic gear oil.

Applications TOTAL CARTER SG 680

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

Your advantage! Price of TOTAL CARTER SG 680 drops automatically in larger quantities.

TOTAL CARTER SG 100 previous Carter SY 100

Ultra high performance synthetic gear oil.

Applications TOTAL CARTER SG 100

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

Your advantage! Price of TOTAL CARTER SG 100 drops automatically in larger quantities.

TOTAL CARTER SG 150 previous Carter SY 150

Ultra high performance synthetic gear oil.

Applications TOTAL CARTER SG 150

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

Your advantage! Price of TOTAL CARTER SG 150 drops automatically in larger quantities.

TOTAL NEVASTANE SH 100

Compressors, pneumatic and hydraulic oils. Synthetic (PAO) oils, suitable for incidental food contact

Applications TOTAL NEVASTANE SH 100

• NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures
• NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

Your advantage! Price of TOTAL NEVASTANE SH 100 drops automatically in larger quantities.

Shell Corena S4 R 46 (Formerly Shell Corena AS 46)

The top in synthetic screw compressor oil

Benefits of Shell Corena S4 R 46 are:

• + 1.5x longer oil life than Corena S3 R
• + No deposits at high operating temperatures
• + Excellent water-separating power
• + Best anti-wear properties improve the life of the compressor
• + Excellent air separation and minimum foaming

Shell Corena S4 R 46 is a synthetic lubricating oil specially developed for lubrication of oil-injected rotary screw compressors for air with one or two stages.

Note ! Price Shell Corena S4 R 46 drops automatically with larger quantities.

CASTROL SPHEEROL LMM

Bearing grease

Application CASTROL SPHEEROL LMM

Spheerol LMM grease is suitable for most types of bearing and a wide range of other industrial applications, which require a molybdenum disulphide grease, including grease lubricated gears. Spheerol LMM may be used in plain and rolling element bearings, including heavily loaded bearings at low and medium speeds, and those subject to shock loading and excessive vibrations.

The incorporation of solid lubricant in Spheerol LMM greases makes this grease particularly suited for the lubrication of reciprocating and sliding motion elements, where the prevention of scuffing and fretting is desirable. Typical applications include pivot pins, cams, screws, splined shafts, slides, flexible joints (ball, universal, CV joints etc). It is also useful for the lubrication of chains, swivels and shackles to prevent scuffing. NB Not recommended for rolling element bearings - ie wheel bearings

Your advantage! Price of CASTROL SPHEEROL LMM drops automatically in larger quantities.

RENOLIT CA-LZ

RENOLIT CA-LZ field of applications:

RENOLIT CA-LZ can be used over a wide temperature range and is suitable for long-term lubrication of motor vehicles, industrial, construction and agricultural machinery. RENOLIT CA-LZ allows lubricating intervals to be extended.

Please note!! Price of RENOLIT CA-LZ drops automatically in larger quantities.

CASTROL Viscogen KL 300 Spray

Synthetic high temperature chain lubricant

Application CASTROL Viscogen KL 300 Spray

Viscogen KL Spray is available in 3 different versions for use depending on the ambient and operating conditions. Spray versions are particularly suited to lubricate difficult to reach lubrication points. The dimensions of the chain as well as its structural shape (e.g. roller, pin, ladder chains, insertion and flat link hoisting chains) are important when selecting the right viscosity. Viscogen KL Sprays find use in many industrial applications, for example: High-rack storage shelves, bakery machines, paint lines, conveyor chains, tenter frames and dryers, washing plants, underfloor chains, steamers, slashers, baking ovens, slide ways, spindles, ropes, open gear wheels, plastic toothed belts and sheet-fed offset machines. Viscogen KL 23 is especially suitable for use in BOPP (Biaxially oriented Polypropylene) film stretching machines.

CASTROL RUSTILO 181

Corrosion Preventive Fluid

Application of CASTROL RUSTILO 181

Castrol Rustilo 181 is a corrosion preventive fluid that, after evaporation, leaves behind a thin hard yet flexible film. It is ideal for providing long-term protection to products under extreme conditions.

Rustilo 181 can be used during storage and transport when you need to protect parts against corrosion for an extended period. It is suitable for all metals and can be applied by dipping, brushing/rolling, or using a spray installation.