Industry & Manfacturing lubricants

MAINTAIN DOT 4

Super High Performance Brake Fluid for hydraulic brake systems and clutch actuation in passenger cars, trucks and motorcycles.

MAINTAIN DOT 4 field of applications:

Vehicle manufacturer’s recommendations are to be obeyed when using MAINTAIN DOT 4. Do not use MAINTAIN DOT 4 in any kind of hydraulic brake or clutch actuation systems if a silicon or mineral oil based fluid (e.g. LHM or DOT 5) is specified.

Please note!! Price of MAINTAIN DOT 4 drops automatically in larger quantities.

Shell Naturelle S2 HF 32 previously Shell Naturelle HF-E 32

Fully Synthetic, Biodegradable, Less-flammable Hydraulic Fluid

Shell Naturelle HF-E 32 main applications:

• Mobile / exterior hydraulic applications
• General industrial control equipment and hydraulic systems
• Environmentally sensitive areas
• Industrial operation subject to fire hazards
  

Shell Naturelle Fluid HF-E 32 is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. Shell Naturelle Fluid HF-E 32 is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.

Pay attention! Price of Shell Naturelle HF-E 32 drops automatically in larger quantities.

Shell Corena S4 P100 compressor oil (Formerly Shell Corena AP 100)

High-quality synthetic lubricating oil for compressed air piston compressors

Main uses of Shell Corena S4 P100 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S4 P 100 is a high-quality synthetic oil composed of synthetic esters and unique high-quality additives. It has been developed for excellent lubrication of compressed air suction compressors, in which discharge temperatures may exceed 220C.

Please note ! Price Shell Corena S4 P 100 drops automatically with larger quantities.

Shell Corena S4 R 32 (Formerly Shell Corena AS 32)

The top in synthetic screw compressor oil

Benefits of Shell Corena S4 R 32 are:

• + 1.5x longer oil life than Corena S3 R 32
• + No deposits at high operating temperatures
• + Excellent water-separating power
• + Best anti-wear properties improve the life of the compressor
• + Excellent air separation and minimum foaming

Shell Corena S4 R 32 is a synthetic lubricating oil specially developed for lubrication of oil-injected rotary screw compressors for air with one or two stages.

Shell Gadus S2 OG 40 Previous Name: Malleus Grease GL 95

Superior Performance Open Gear Greases

Shell Gadus S2 OG 40 main applications:

• Heavily loaded open gears, particularly those found in grinding mills, kilns, shovels, draglines, ship loaders, stackers and reclaimers and excavator applications. When choosing a product to suit your ambient temperature conditions, always consult with your Shell representative for the appropriate grade.
• Multi-service lubricant that can be used as the one grease (multipurpose and open gear) for the entire machine on most shovels, excavators and draglines (excluding electrical motors bearings).
• Surface dressing of slow moving gears open to the atmosphere.
• Plain bearings, pivot pins/bushings & articulations found in earth moving equipment.
• Mooring, static and slow moving wire ropes including those intermittently immersed in salt water.
• Wide variety of heavy-duty mining and industrial applications.

Please note!! Price of Shell Gadus S2 OG 40 drops automatically in larger quantities.

CASTROL Molub-Alloy Paste White RV

White paste for clean assembly work, prevents fretting corrosion

Application CASTROL Molub-Alloy Paste White RV

Universal application as assembly paste. Prevents fretting corrosion especially when exposed to vibrations. Avoids stick-slip. For machines subject to frictional vibrations. Avoids squeaking noises in hydraulic cylinders and open lubrication points. Temperature application range: -40°C to +250° C.

Your advantage! Price of CASTROL Molub-Alloy Paste White RV drops automatically in larger quantities.

Shell Gadus S5 V142W 00 Previous Name: Tivela Grease GL 00 & Tivela Compound A

Advance Performance Semifluid Gear Grease

Shell Gadus S5 V142W 00 main applications:

• Small industrial gear units
• Worm gears the low steel/tin-bronze frictional characteristics of Shell Gadus S5 V142W make it particularly suitable for worm gears having this combination of alloys.
• Steel/Aluminium-bronze: Shell Gadus S5 V142W is not recommended for the combination steel/aluminium- bronze, for which a grease based on a higher viscosity mineral oil is preferred.
• Flushing and filling with Shell Gadus S5 V142W: is a synthetic polyglycol based lubricant and must not be mixed with mineral oils. Care should be taken when changing over from oil or conventional grease. Flushing with a thin mineral oil will ensure, as far as possible, freedom from solid contaminants and deterioration products resulting from previous use of gear oils or greases. It is important to ensure that none of the flushing oil remains in the gearbox. When refilling the gearbox with Shell Gadus S5 V142W every precaution should be taken to ensure complete cleanliness. For optimum performance from both gearbox and lubricant, only the amount recommended by the gearbox manufacturer should be used.
• Paints. High quality red lead or epoxy resin paints are recommended for use in contact with Shell Gadus S5 V142W, as the synthetic polyglycol component will tend to attack certain conventional paints.
• Seals. Shell Gadus S5 V142W may be used satisfactorily with all normal seal materials. Leather seals are not recommended as the natural fats tend to be removed, leaving the seals thin and brittle.

Shell Gadus S5 V142W is a synthetic, semi-fluid gear lubricant developed to meet the highest requirements of industrial gearboxes allowing long life trouble free operation.

Please note!! Price of Shell Gadus S5 V142W 00 drops automatically in larger quantities.

TOTAL CARTER SG 220 previous Carter SY 220

Ultra high performance synthetic gear oil.

Applications TOTAL CARTER SG 220

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

Your advantage! Price of TOTAL CARTER SG 220 drops automatically in larger quantities.

TOTAL LUNARIA SK 55

Alkylbenzene synthetic oils for refrigerating compressors

Applications TOTAL LUNARIA SK 55

• LUNARIA SK is a quality refrigeration compressors lubricant using CFC or HCFC refrigerants. Due to their chemical nature, these oils have superior miscibility with fluorocarbon refrigerant such as R12, R502 and R22 and are thus perfectly adapted to the low temperatures.
• LUNARIA SK is also suitable for the cylinder lubrication of heavy duty reciprocating air compressors (discharge temperature > 200 °C).

Your advantage! Price of TOTAL LUNARIA SK 55 drops automatically in larger quantities.

RENOLIT CXI 2

Water resistant, low temperature grease

RENOLIT CXI 2 field of applications:

RENOLIT CXI 2 should be used for all lubrication points requiring a high performance concerning water resistance, working stability, EP and AW properties.

Please note!! Price of RENOLIT CXI 2 drops automatically in larger quantities.

Mobil Pegasus 1

Synthetic gas engine oil designed to meet the highest performance

Main applications of Mobil Pegasus 1 are:

• Mobil Pegasus 1 is recommended for a wide range of gas engine models
• The product is particularly suited for high speed, four-cycle turbocharged and naturally aspirated gas engines requiring a nominal 0.5% ash gas engine oil.
• It is an excellent lubricant for both stoichiometric and lean-burn designs
• It is ideally suited for cogeneration and ebullient cooled applications because of its wide temperature range capability and extended engine protection and long oil life.
• Mobil Pegasus 1 is fully compatible with all seals commonly used in gas engines and with mineral oils but admixture with mineral oils will lower the performance benefits that can be obtained from this outstanding lubricant
• May be used with gas engines using alternative energy sources for fuel gas containing up to 0.3% sulphur as hydrogen sulphide
  
  

Your benefit : Price Mobil Pegasus 1 automatically drops with larger quantities.

Shell Gadus S2 OG 50 Previous Name: Malleus Grease GL 205

Superior Performance Open Gear Greases

Shell Gadus S2 OG 50 main applications:

• Heavily loaded open gears, particularly those found in grinding mills, kilns, shovels, draglines, ship loaders, stackers and reclaimers and excavator applications. When choosing a product to suit your ambient temperature conditions, always consult with your Shell representative for the appropriate grade.
• Multi-service lubricant that can be used as the one grease (multipurpose and open gear) for the entire machine on most shovels, excavators and draglines (excluding electrical motors bearings).
• A surface dressing of slow-moving gears open to the atmosphere.
• Plain bearings, pivot pins/bushings & articulations found in earth moving equipment.
• Mooring, static and slow-moving wire ropes including those intermittently immersed in salt water.
• A wide variety of heavy-duty mining and industrial applications

Please note!! Price of Shell Gadus S2 OG 50 drops automatically in larger quantities.

RENOLIT CX-HT 0

RENOLIT CX-HT 0 field of applications:

RENOLIT CX-HT 0 is used for the lubrication of high loaded, low speed plain and roller bearings, open gears and gear wheels. RENOLIT CX-HT 0 is usable in a wide temperature range, does not drip off in summer, and does not harden at low ambient temperature.

Please note!! Price of RENOLIT CX-HT 0 drops automatically in larger quantities.

CASTROL Tribol CH 1430 spray

High-temperature Chain Oil

Application CASTROL Tribol CH 1430 spray

Tribol 1430 high-temperature chain oil is especially recommended for chain lubrication at temperatures upto 240 °C with short term maximum temperature of 270 °C . It is used for the lubrication of oven chains in lithographic printing plants and in the coating industry as well as in drying ovens of the automotive industry

Your advantage! Price of CASTROL Tribol CH 1430 spray drops automatically in larger quantities.

Castrol Alusol SL 51 XBB

High performance soluble metalworking fluid

Application Castrol Alusol SL 51 XBB

Alusol SL 51 XBB is especially designed for machining of aluminum alloys. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Alusol SL 51 XBB drops automatically in larger quantities.

Castrol Alusol SL 51 XBB

High performance soluble metalworking fluid

Application Castrol Alusol SL 51 XBB

Alusol SL 51 XBB is especially designed for machining of aluminum alloys. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Alusol SL 51 XBB drops automatically in larger quantities.

TOTAL CARTER SG 320 previous Carter SY 320

Ultra high performance synthetic gear oil.

Applications TOTAL CARTER SG 320

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

Your advantage! Price of TOTAL CARTER SG 320 drops automatically in larger quantities.

TOTAL SPECIS CU

Anti-seize grease with copper.

Applications TOTAL SPECIS CU

• For use when assembling components which are susceptible to corrosion or oxidation and are subsequently difficult to dismantle.
• For use when assembling components which are susceptible to corrosion or oxidation and are subsequently difficult to dismantle.
• The grease was developed for engine exhaust manifold nuts which frequently seize due to the high temperatures involved.

Your advantage! Price of TOTAL SPECIS CU drops automatically in larger quantities.

TOTAL CARTER SH 150

Synthetic oil (PAO) for enclosed gears.

Applications TOTAL CARTER SH 150

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.

• bevel and spur gears
• Heavily loaded bearings and gear couplings.

Your advantage! Price of TOTAL CARTER SH 150 drops automatically in larger quantities.

CASTROL Iloform PS 158

Water extendible forming paste

Application CASTROL Iloform PS 158

Iloform PS 158 is specially formulated for use in single die and progressive die presses for medium duty deep drawing applications. It is suitable for use on steels, aluminium and aluminium alloys. Iloform PS 158 can be used as supplied or used diluted in water to a minimum concentration of 20%v/v oil to water, for less difficult operations. Forms a stable milky white emulsion in water.