Motor oil

Castrol Edge 5W-30 C3

Application of Castrol EDGE 5W-30 C3

Castrol EDGE 5W-30 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant. Castrol EDGE 5W-30 C3 is recommended and approved for use in vehicles from leading OEMs, please refer to the specifications section and your owners handbook.

Specifications

• ACEA C3 / API SN / CF High performance shear stable petrol/diesel engine oil
• Dexos2®
• MB 229.31 & MB 229.51
• Renault RN 0700 / RN 0710; 
• Vauxhall GM-LL-A-025; GM-LL-B-025
• GB2E0209082
• VW 502.00 / VW 505.00 / VW 505.01

Mobil Pegasus™ 710

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus™ 710 are:

• + Spark ignited four-cycle gas engines with very low oil consumption
• + Engines experiencing valve train wear and corrosion
• + Engines operating on fuel containing low levels of sulphur and chlorine compounds
• + Reciprocating compressor cylinders compressing natural gas
• + High output or ambient rated engines operating at or in excess of rated capacity under high temperatures

Pay attention! Price of Mobil Pegasus™ 710 drops automatically with higher volumes.

Shell Helix Ultra 0W-40

Fully synthetic motor oil - Shell's most advanced formulation for high-performance engines

Shell Helix Ultra 0W-40 main applications:

• Shell Helix Ultra's fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix Ultra 0W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It helps to reduce engine friction to provide enhanced fuel economy

Please note!! Price of Shell Helix Ultra 0W-40 drops automatically in larger quantities.

Castrol Vecton 15W-40 CK-4/E9 (previous Agri Power Plus 15W-40 and Vecton 15W-40 CJ)

For longer useful oil life

Your advantage! Price of Castrol Vecton 15W-40 CK-4/E9 drops automatically in larger quantities.

Mobil Delvac Modern 10W-40 Super Defense V1 previously Mobil Delvac XHP EXTRA 10W-40

Vehicle Lube Motor oil

Mobil Delvac Modern 10W-40 Super Defense V1 is a synthetic extra high-performance diesel motor oil for modern diesel engines used in severe on & off-highway applications. 

Most important applications of Mobil Delvac Modern 10W-40 Super Defense V1 are:

• + Naturally aspirated and turbo-charged diesel powered engines built by European and Japanese manufacturers
• + On-highway light and heavy-duty trucking
• + Off-highway industries including: construction, mining, quarrying, and agriculture
   

Previous Mobil Delvac XHP ESP 10W-40

Vehicle Lube Motor oil

Mobil Delvac XHP ESP M 10W40 is a synthetic extra high-performance engine oil for modern diesel engines designed in heavy transport & contracting applications.

Most important applications of Mobil Delvac XHP ESP M 10W-40 are:

• + Heavy Duty Diesel Engines including Euro V/VI Modern Low Emissions Vehicles, Utilizing Technologies such as DPF, SCR, CRT, DOC and EGR
• + Heavy Duty Diesel Engines using low sulfur diesel fuels and many biodiesel fuel formulations
• + Naturally Aspirated and Turbo-Charged Diesel Powered Equipment
• + On-Highway Short-Haul and Long-Haul Trucks and Buses
• + Off-Highway Mining, Construction and Agricultural Equipment
   

Pay attention! Price of Mobil Delvac XHP ESP M 10W-40 drops automatically with higher volumes.

Castrol CRB Multi 15W-40 CI-4

For long and healthy engine life

Your advantage! Price of Castrol CRB Multi 15W-40 CI-4 drops automatically in larger quantities.

CASTROL CRB Monograde 30W

Monograde engine oil SAE 30

Application CASTROL CRB Monograde 30W

Castrol CRB Monograde 30W monograde is a diesel engine oil available from SAE 10W, 20W and 30. Depending on the recommended viscosity and manufacturer's instructions, the Castrol CRB Monograde can be used in engines, transmissions and hydraulic systems.

Your advantage! Price of CASTROL CRB Monograde 30W drops automatically in larger quantities.

Castrol Power RS Ultimate 4T 5W-40 previously Castrol Power RS Racing 4T 5W-40

Properties

Q8 Formula Truck 8800 FE 5W-30

Ultra High Performance Synthetic Fuel Saving Heavy Duty engine oil with Low Sulphated Ash, Phosphorus and Sulphur content (Low SAPS) designed for lubrication of latest Euro VI engines.

Applications Q8 Formula Truck 8800 FE 5W-30

For Euro IV, Euro V and Euro VI diesel engines equipped with a diesel particulate filter (DPF) or catalytic after treatment systems (such as SCR) operating on low sulphur diesel fuel (50 ppm or below) and under severe heavy duty conditions.

Best in-class bio-fuel compatibility for excellent cold starting properties.

Fuel Economy Improvements up to 1% or more vs. a 10W-40 oil.

Extended oil drain intervals as indicated by the OEM for high quality diesel engine oils can be applied.

For ACEA E4, E6, ACEA E7, ACEA E9 and API CJ-4 applications

Low SAPS formulation for ACEA E4 High TBN Long Drain applications

Your advantage! Price of Q8 Formula Truck 8800 FE 5W-30 drops automatically in larger quantities.

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

Castrol EDGE FST 0W-40

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

CASTROL Transmax ATF Z previously Transmax Z

Automatic Transmission Fluid

TITAN CARGO MC 10W-40

Top Performance, fuel-economy oil for a variety of commercial vehicle diesel engines. Specially developed for extended service intervals. Good cold starting and lower oil consumption.

TITAN CARGO MC 10W-40 field of applications:

TITAN CARGO MC 10W-40 has a higher performance capacity than the usual high performance engine oils. Internationally, this type of oil is designated as UHPD (UHPD = Ultra High Performance Diesel Oil). Regardless of the current service life, even older diesel engines can be changed over to TITAN CARGO MC 10W-40 without flushing.

Please note!! Price of TITAN CARGO MC 10W-40 drops automatically in larger quantities.

Mobil Delvac 1 LE 5W-30

Vehicle Lube Motor oil

Fully Synthetic Heavy-Duty Diesel Engine Oil

Most important applications of Mobil Delvac 1 LE 5W-30 are:

• + Heavy Duty Diesel Engines including Euro V/VI and US EPA 2007/2010 Modern Low Emissions Vehicles, Utilizing Technologies such as Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR)
• + Heavy Duty Diesel Engines using low sulfur diesel fuels and many biodiesel fuel formulations
• + Naturally Aspirated and Turbo-Charged Diesel Powered Equipment
• + On-Highway Short-Haul and Long-Haul Trucks and Buses
• + Off-Highway Mining, Construction and Agricultural Equipment

Pay attention! Price of Mobil Delvac 1 LE 5W-30 drops automatically with higher volumes.

CASTROL Hyspin AWS 100

Anti-wear Hydraulic Oil

Application CASTROL Hyspin AWS 100

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials. Hyspin AWS is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM. Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 2; Cincinnati Lamb (Milacron) P 68-69-70; Denison (Parker Hannafin); HF-0 US Steel 126 & 127; Eaton (formerly Vickers) I-286-S & M-2950-S; MB – Approval 341.

CASTROL Radicool NF Premix

Ready to use engine coolant and antifreeze

Application CASTROL Radicool NF Premix

Castrol Radicool NF premix has been developed using Hybrid Additive Technology to provide total protection for modern engine radiator systems, cylinder block heads, water pumps and heat exchangers . In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool NF Premix for the first time, ensure that the cooling system has been adequately flushed with clean water before use.

CASTROL Variocut G 600 HC

High performance neat cutting oil

Appliciation CASTROL Variocut G 600 HC

Variocut G 600 HC is designed for high speed, creep feed grinding, especially gear grinding of ferrous and yellow metals with CBN and carborundum wheels.

Castrol Vecton Long Drain 10W-40 E7

Helps maximise performance

Application Castrol Vecton Long Drain 10W-40 E7

Castrol Vecton Long Drain 10W-40 E7 is designed for extended drain in modern diesel engines including Euro II, Euro III and Euro IV/V/VI engines where permitted by manufacturers at the specification levels met. It can also be used in offroad vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-40 E7 drops automatically in larger quantities.