Klüber Klüberpaste HEL 46-450
97% supplied in 5 working days
Bank transfer or Credit Card (master card & visa) payment
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
UK Deliveries
incoterm DAP
QUESTIONS?
Klüber Klüberpaste HEL 46-450
High-temperature screw paste
Application Klüber Klüberpaste HEL 46-450
Screw paste for conventional and high-alloy steels (Cr-Ni steels) up to 1000 °C. Lubricating and assembly paste for connections in hot air ducts (e.g. automotive exhaust systems). For connecting elements in turbochargers and compressors. The test was performed acc. to VW-TL 52112 Bolt: DIN 931-2; Material:1.4989; Nut, material: 1.4923. The nuts were preloaded with 70 Nm and stored at 750 °C for 100 hours. After this period a low release torque was measured.
Performance, Features & Benefits of Klüber Klüberpaste HEL 46-450 are:
- Reliable screw connection ensured by constant and sufficient preload force
- Easy release also after long time at high temperature
- Approved in acc. with VW-TL 52112 and Ford tox. No. 138624
If you have any questions, please contact OlieOnline Technical Helpdesk
Product Description Klüber Klüberpaste HEL 46-450
Klüberpaste HEL 46-450 is a black hot screw paste for highalloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants. Klüberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant.
Typical Characteristics
| Product specifications : | Klüber Klüberpaste HEL 46-450 | |
| Article number | 089032 | |
| Lower service temperature | -40 °C / -40 °F | |
| Upper service temperature | 1000 °C / 1832 °F | |
| Colour space | black | |
| Density at 20 °C | approx. 1.43 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 325 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 340 x 0.1 mm |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree |
| Flow pressure of lubricating greases, test temperature: -35 °C | DIN 51805-2 | <= 600 mbar |
| Drop point, | DIN ISO 2176, IP 396 | >= 250 °C |
| Four-ball tester, welding load, | DIN 51350 pt. 04 | >= 5 000 N |
| High-temperature screw test according to VW-TL 52112, breakaway torque | <= 120 Nm | |
| Friction coefficient screw test, measured with hexagon bolts M10x30-8.8, tightening speed n = 5 rpm, number of screws = 20, nut M10-8, plain and degreased, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 50 Nm, averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.11 |
| Friction coefficient screw test, measured with hexagon bolts M10x30-8.8, tightening speed n = 5 rpm, number of screws = 20, nut M10-8, plain and degreased, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 50 Nm, standard deviation (S) of averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.015 |
| Friction coefficients screw test, screw M 10x30-8.8, black and nut M 10-8, DIN EN ISO 4032, polished, averaged thread friction coefficient (first-time tightening) |
DIN EN ISO 4017 |
0.09 |
| Friction coefficient screw test, Measured with hexagon bolts M10x30-8.8, tightening speed n = 5 rpm, number of screws = 20, nut M10-8, plain and degreased, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 50 Nm, standard deviation (S) of averaged thread friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.01 |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.09 |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, standard deviation (S) of averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.006 |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, averaged thread friction coefficient (initial tightening) |
DIN EN ISO 4017 |
0.11 |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, standard deviation (S) of averaged thread friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.03 |
| Water resistance, 3 h/90 °C, rating | DIN 51807 pt. 01 | <= 1 - 90 |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
It is important to clean and degrease the contact surfaces thoroughly before applying Klüberpaste HEL 46-450. A thin layer of paste is then applied by brush, leather cloth or plastic sponge. Klüberpaste HEL 46-450 spreads easily over the entire surface and thus prevents excess lubrication. Close container immediately after use in order to prevent contamination. The friction values indicated on page 2 in the Section Product Data were determined with two different materials. Other materials/surfaces have to be checked accordingly.
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.