Shell Varnish Removal Fluid

Performance, Features & Benefits of Shell Varnish Removal Fluid are:

• High Varnish Dissolution Capacity Shell Varnish Removal Fluid is designed with a low aniline point to impart improved capacity of varnish dissolution which allows the oil cleaning device removing the varnish from used oils thus effectively extend the oil life and the maintenance intervals of the operating system..
• Excellent Compatibility When added at the recommended treat rates of 3 to 10% in the in-service oil, Shell Varnish Removal Fluid demonstrates excellent compatibility without negatively impacting the performance of the oil in areas such as flash point reduction or degrading surface properties including foaming tendency, air release or water separation. When used at the recommended treat rates, mixtures are fully compatible with filter media and elastomers as commonly applied in rotating equipment. As noted above, care must be taken if Shell Varnish Removal Fluid is added to systems where the operating oil viscosity is over 150 cSt at 400C. In these systems, the effect oil dilution must be taken into consideration.

Specifications of Shell Varnish Removal Fluid are:

• For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.

If you have any questions, please contact OlieOnline Technical Helpdesk

Health, Safety & Environment of Shell Varnish Removal Fluid

Health and Safety

Shell Varnish Removal Fluid is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from https://www.epc.shell.com

Protect the enviroment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.