Viskositaet

Klüber Summit SH 100

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 100

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

TOTAL CIRKAN RO 46

R and O type machine oils.

Applications CIRKAN RO 46

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 46 drops automatically in larger quantities.

TOTAL CIRKAN RO 220

R and O type machine oils.

Applications CIRKAN RO 220

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 220 drops automatically in larger quantities.

TOTAL AZOLLA AF 32

Antiwear, ashless hydraulic oils

Applications TOTAL AZOLLA AF 32

• Hydraulic systems operating under high pressure and/or temperature conditions.
• High-pressue vane, piston or gear pumps.
• Sensitive hydraulic circuits requiring absolute filterability of the fluid (very fine servo valve play) : plastic moulding machines.
• Any hydraulic system where the risk of contamination of the environment and waters exists.
• Any application where an antiwear, high-performance oil is necessary : various movements, plain bearings and rolling bearings, reducers under low load, etc. .
• Lubrication of circuits in which the presence of water is accidental : machine tools, farm and food products industries, paper mills, steel making, etc.

Your advantage! Price of TOTAL AZOLLA AF 32 drops automatically in larger quantities.

Q8 Heinichen 32

Excellent zinc-based hydraulic detergent oil

Applications Q8 Heinichen 32

Q8 Heinichen 32 is perfect for hydraulic systems where water can be a problem or hydraulic systems are subject to potential pollution such as off-highway equipment.

Your advantage! Price of Q8 Heinichen 32 drops automatically in larger quantities.

Q8 Heinichen 46

Applications Q8 Heinichen 46

Wide range of hydraulic equipment

Your advantage! Price of Q8 Heinichen 46 drops automatically in larger quantities.

Shell Morlina S1 B 220 previously Shell Vitrea 220

Industrial Bearing & Circulating Oil

Application Shell Morlina S1 B 220

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

Klübersynth GEM 4-32 N

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology

Application Klübersynth GEM 4-32 N

Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.

Q8 van Gogh 46

Applications Q8 van Gogh 46

Turbine oil for steam- and gas turbine circulation systems

Can also be used in compressors and pumps where R&O type turbine oil is recommended.

Your advantage! Price of Q8 van Gogh 46 drops automatically in larger quantities.

TOTAL CIRKAN C 320

High quality oils for moving parts.

Applications CIRKAN C 320

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:

• moving parts
• swivels
• journals
• chains

Your advantage! Price of TOTAL CIRKAN C 320 drops automatically in larger quantities.

TOTAL PRESLIA GT 46

High performance long life gas turbine oils for severe applications

Applications TOTAL PRESLIA GT 46

PRESLIA GT oils are:

• specially designed for the lubrication (bearings, gear boxes) and control circuit of steam and gas turbines
• turbines submitted to high thermal stress
• suitable for turbine coupled gears lubrication

Your advantage! Price of TOTAL PRESLIA GT 46 drops automatically in larger quantities.

TOTAL PRESLIA 32

Mineral turbine oils.

Applications TOTAL PRESLIA 32

• PRESLIA oils are specially designed for the lubrication of hydraulic, steam or gas turbines. They can also be used in centrifugal compressors or turbochargers.

Your advantage! Price of TOTAL PRESLIA 32 drops automatically in larger quantities.

TOTAL CIRKAN C 32

High quality oils for moving parts.

Applications CIRKAN C 32

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:

• moving parts
• swivels
• journals
• chains

Your advantage! Price of TOTAL CIRKAN C 32 drops automatically in larger quantities.

TOTAL PRESLIA GT 32

High performance long life gas turbine oils for severe applications

Applications TOTAL PRESLIA GT 32

PRESLIA GT oils are:

• specially designed for the lubrication (bearings, gear boxes) and control circuit of steam and gas turbines
• turbines submitted to high thermal stress
• suitable for turbine coupled gears lubrication

Your advantage! Price of TOTAL PRESLIA GT 32 drops automatically in larger quantities.

TOTAL HYDRANSAFE HFC 146

Fire resistant hydraulic fluid.

Applications TOTAL HYDRANSAFE HFC 146

• HYDRANSAFE HFC 146 is a high performance synthetic water-polymer, fireresistant hydraulic fluid.
• regulation and hydraulic circuits of Furnaces, Continuous Casting Units in the Steel and Aluminium Industry, Heat-treat Ovens for quenching operations, Drying Furnace and other applications in fire risk areas, as in mining industry
• Hydraulic systems of mould injection machines.
• Operating temperature range is from - 20 °C to + 60 °C.
• When changing from a mineral oil based hydraulic system components and to apply an appropriate cleaning of the hydraulic system

Your advantage! Price of TOTAL HYDRANSAFE HFC 146 drops automatically in larger quantities.

TOTAL DACNIS LD 32

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 32

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 32 drops automatically in larger quantities.

Mobil DTE PM 220

Paper Machine Lubricants

Application Mobil DTE PM 220

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Shell Morlina S1 B 320 previously Shell Vitrea 320

Industrial Bearing & Circulating Oil

Application Shell Morlina S1 B 320

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

Shell Turbo S4 GX 46

Premium based industrial steam, gas and combined cycle turbine lubricant for geared turbines

Application Shell Turbo S4 GX 46

Power and industrial steam, gas & combined cycle turbines. Shell Turbo S4 GX 46 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines, especially those needing enhanced anti-wear performance to protect highly loaded gearboxes.

Further industrial applications. Shell Turbo S4 GX 46 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors

Mobil DTE 732

Premium Turbine Oils

Application Mobil DTE 732

Mobil DTE 700 Series are designed to meet or exceed the requirements of circulation systems of steam and gas turbines. Specific applications include Electric power generation for high output base load utilities. Gas Turbine Combined Cycle Power Plants operating in base load or peak generation modes. Gas turbines in Captive Power plants. Gas or steam turbine prime movers. Hydroelectric turbine applications