Tractor & Yellow Goods

CASTROL CareCut ES 2

High performance neat cutting oil

Application CASTROL CareCut ES 2

CareCut ES 2 is designed for high speed, creep feed and gear grinding of ferrous and non ferrous metals. It can also be used for drilling and general machining applications, as well as for hard metal and tool grinding. CareCut ES 2 does not contain active sulphur and is hence compatible with yellow metals.

CASTROL CareCut ES 1

High performance neat cutting oil

Application CASTROL CareCut ES 1

CareCut ES 1 is especially designed for several machining applications including general machining, broaching and gear manufacture of ferrous and non ferrous metals. CareCut ES 1 does not contain active sulphur and is hence compatible with yellow metals.

CASTROL Performance Bio HE 46

Biodegradable hydraulic oil

Application CASTROL Performance Bio HE 46

Performance Bio HE 46 is intended for use in all hydraulic systems, where there is a risk that leaking fluid will contaminate ground water and the sewage system, such as in earthmoving machinery, refuse collection lorries, agricultural and forestry machinery, rail vehicles, presses and wrapping machines. Thanks to the carefully selected base oil, it can be used up to +120 °C. The viscosity index has a high value which means that the viscosity of the product depends relatively little on the temperature. The environmentally friendly nature, measured according to the CEC L-33-A-93 test is >90%. Performance Bio HE46 is not miscible with water. Performance Bio HE 46 is miscible with hydraulic fluids based on mineral oil and vegetable or synthetic esters. Nevertheless, when switching from mineral oil based hydraulic fluids to Performance Bio HE 46 it is recommended to empty the system completely as mixing with mineral oil reduces biodegradability and may lead to foaming problems. Performance Bio HE 46 meets the requirements according to VDMA 24568 for a HEES (Hydraulic Environmental Ester Synthetic).

CASTROL Optigear BM 680

High Performance Gear Oils

Application CASTROL Optigear BM 680

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 680 drops automatically in larger quantities.

CASTROL Optigear BM 100

High Performance Gear Oils

Application CASTROL Optigear BM 100

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 100 drops automatically in larger quantities.

CASTROL Almaredge 51 FF

High performance soluble metalworking fluid

Application CASTROL Almaredge 51 FF

Almaredge 51 FF is especially designed for grinding of steel and machining of low-medium alloyed steel and cast iron.

CASTROL Optigear BM 68

High Performance Gear Oils

Application CASTROL Optigear BM 68

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 68 drops automatically in larger quantities.

CASTROL Aircol SR 46

Synthetic air compressor lubricant

Application CASTROL Aircol SR 46

Aircol SR is suitable for use in oil flooded rotary screw compressors and is classified as follows: DIN 51506 classification- VDL; ISO 6743/3-DAG, DAH and DAJ for rotary air compressors. Aircol SR grades meet the requirements of: Atlas Copco 8000 hour oil drain interval; Kaeser

CASTROL Optileb HY 32

Food grade hydraulic oils

Application CASTROL Optileb HY 32

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

CASTROL Optileb HY 46

Food grade hydraulic oils

Application CASTROL Optileb HY 46

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

CASTROL Aircol SN 68

Synthetic Air Compressor Lubricant

Application CASTROL Aircol SN 68

Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

CASTROL Optileb HY 68

Food grade hydraulic oils

Application CASTROL Optileb HY 68

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

CASTROL Tribol GR 100-0 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-0 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-0 PD drops automatically in larger quantities.

CASTROL Aircol SN 100

Synthetic Air Compressor Lubricant

Application CASTROL Aircol SN 100

Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

CASTROL Optigear Synthetic 800/1000

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/1000

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/1000 drops automatically in larger quantities.

CASTROL Tribol GR 100-00 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-00 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-00 PD drops automatically in larger quantities.

CASTROL Optileb GT 100

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 100

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 150

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 150

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 220

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 220

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 320

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 320

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.