Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Tractor & Yellow Goods

Items 21 to 40 of 73 total

Set Descending Direction
per page

  • Castrol Hyspin AWS 100

    CASTROL Hyspin AWS 100

    Anti-wear Hydraulic Oil

    Application CASTROL Hyspin AWS 100

    Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials. Hyspin AWS is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM. Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 2; Cincinnati Lamb (Milacron) P 68-69-70; Denison (Parker Hannafin); HF-0 US Steel 126 & 127; Eaton (formerly Vickers) I-286-S & M-2950-S; MB – Approval 341.

    Learn More

    Starting at: Excl. Tax: £128.05 Incl. Tax: £154.94

  • Castrol Radicool NF Premix

    CASTROL Radicool NF Premix

    Ready to use engine coolant and antifreeze

    Application CASTROL Radicool NF Premix

    Castrol Radicool NF premix has been developed using Hybrid Additive Technology to provide total protection for modern engine radiator systems, cylinder block heads, water pumps and heat exchangers . In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool NF Premix for the first time, ensure that the cooling system has been adequately flushed with clean water before use.

    Learn More

    Starting at: Excl. Tax: £128.20 Incl. Tax: £155.12

  • Castrol Aircol PD 100

    CASTROL Aircol PD 100

    Rotary Screw Compressor Lubricant

    Application CASTROL Aircol PD 100

    Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

    Learn More

    Starting at: Excl. Tax: £138.52 Incl. Tax: £167.61

  • Castrol Hyspin AWH-M 15

    CASTROL Hyspin AWH-M 15

    High viscosity index anti-wear hydraulic oils

    Application CASTROL Hyspin AWH-M 15

    Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water contamination upon standing. Applications include: Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin AWH-M is classified as follows: DIN 51502 classification – HVLP ISO 6743/4 - Hydraulic Oils Type HV Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 3 Cincinnati Lamb (Milacron) P 68-69-70 Denison (Parker Hannafin) HF-0 US Steel 126 & 127 Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220

    Your advantage! Price of CASTROL Hyspin AWH-M 15 drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £139.48 Incl. Tax: £168.77

  • Castrol Aircol PD 68

    CASTROL Aircol PD 68

    Rotary Screw Compressor Lubricant

    Application CASTROL Aircol PD 68

    Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

    Learn More

    Starting at: Excl. Tax: £142.08 Incl. Tax: £171.92

  • Castrol Perfecto x 46

    CASTROL Perfecto X 46 previously Perfecto T 46

    Turbine oils

    Application CASTROL Perfecto X 46

    The Perfecto X 46 lubricant is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

    Learn More

    Starting at: Excl. Tax: £143.91 Incl. Tax: £174.13

  • Castrol Hyspin Spindle Oil ZZ 5

    CASTROL Hyspin Spindle Oil E 5

    Spindle Oils

    Application CASTROL Hyspin Spindle Oil E 5

    Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

    Your advantage! Price of CASTROL Hyspin Spindle Oil E 5 drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £157.91 Incl. Tax: £191.07

  • Castrol Perfecto T 32

    CASTROL Perfecto X 32 previously Perfecto T 32

    Turbine oils

    Application CASTROL Perfecto X 32

    The Castrol Perfecto X turbine oil range of lubricants is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

    Learn More

    Starting at: Excl. Tax: £158.04 Incl. Tax: £191.23

  • Castrol Hyspin ZZ 10

    CASTROL Hyspin Spindle Oil 10

    Spindle Oils

    Application CASTROL Hyspin Spindle Oil 10

    Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

    Your advantage! Price of CASTROL Hyspin Spindle Oil 10 drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £164.90 Incl. Tax: £199.53

  • Castrol Iloform PN 226

    CASTROL Iloform PN 226

    High performance neat cutting oil

    Application CASTROL Iloform PN 226

    Iloform PN 226 is specially formulated for use in single die and progressive die presses for medium to heavy deep drawing applications. It is suitable for use on steels, stainless steels and nickel alloy steels

    Learn More

    Starting at: Excl. Tax: £165.86 Incl. Tax: £200.69

  • Castrol Rustilo DWX 30

    CASTROL Rustilo DWX 30

    Dewatering corrosion preventive

    Application CASTROL Rustilo DWX 30

    Rustilo DWX 30 rapidly removes water from components subsequent to electroplating processes, after machining using soluble cutting fluids, or parts that have been washed. The very thin residual film provides effective medium term protection against corrosion during intermediate storage or transportation. Rustilo DWX 30 can also be used as a lubricant for mild press working, where corrosion protection without further treatment is required. Although Rustilo DWX 30 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

    Learn More

    Starting at: Excl. Tax: £169.45 Incl. Tax: £205.03

  • Castrol Rustilo DWX 32

    CASTROL Rustilo DWX 32

    Dewatering corrosion preventive

    Application CASTROL Rustilo DWX 32

    Rustilo DWX 32 is a medium to long term protective for use in severe conditions where a high degree of protection is required. It is ideal for protection of machined components prior to storage or transportation. The product also shows good water displacing properties. Although Rustilo DWX 32 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

    Learn More

    Starting at: Excl. Tax: £175.25 Incl. Tax: £212.05

  • Castrol Techniclean MP Flex

    CASTROL Techniclean MP Flex

    Heavy duty, multi-purpose alkaline cleaner

    Application CASTROL Techniclean MP Flex

    Techniclean MP Flex is a versatile product, being suited to a wide range of operations in production engineering, as well as being suitable for virtually all ferrous and non-ferrous metals. Techniclean MP Flex can be used for: Industrial process cleaning in a wide range of modern equipment which includes, spray and flood wash, dip and ultrasonic applications. It is capable of removing difficult soils, for example, heavy duty neat cutting, forming oils, greasy and waxy corrosion preventive films, lubrication oils, greases, and carbon. Other applications also include swarf and general workshop grime. Machine tool cleaning of central systems, individual sumps, and other contaminated areas of machine tools. It is suitable for use with all types of soluble metalworking fluids including synthetics. Added to the system on the day before the coolant is due to be discharged will ensure thorough cleaning by the time the entire coolant system is emptied the following day. General purpose maintenance cleaning on floors, walls and other hard surfaces. Mass vibratory finishing in conjunction with abrasive stones (MVF).

    Learn More

    Starting at: Excl. Tax: £187.61 Incl. Tax: £227.01

  • Castrol Transmax Manual Z Long Life 75W-80

    Castrol Transmax Manual Z Long Life 75W-80 previously CASTROL Syntrans Z Long Life 75W-80

    Manual Transmission Fluid

    Learn More

    Starting at: Excl. Tax: £189.45 Incl. Tax: £229.23

  • Castrol Iloform PN 403

    CASTROL Iloform PN 403

    Chlorine free vanishing oil

    Application CASTROL Iloform PN 403

    Iloform PN 403 is specially formulated for use in light duty sheet metal stamping operations where very low residues are required, in most cases eliminating the need for inter process cleaning. It is specifically suitable for stamping of low to medium collar height aluminium fins, in the refrigeration industry and shows excellent compatibility with the industries special requirements.

    Learn More

    Starting at: Excl. Tax: £193.61 Incl. Tax: £234.27

  • Castrol Optigear BM 150

    CASTROL Optigear BM 150

    High Performance Gear Oils

    Application CASTROL Optigear BM 150

    Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

    Your advantage! Price of CASTROL Optigear BM 150 drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £194.25 Incl. Tax: £235.04

  • Castrol Techniclean MP 2

    CASTROL Techniclean MP 2

    Multi-purpose process cleaner

    Application CASTROL Techniclean MP 2

    Techniclean MP 2 is a multi-purpose process cleaner for precision cleaning of most metals, even sensitive aluminium alloys. It cleans to the most demanding specifications in a wide range of modern equipment, which includes spray and intensive flood wash as well as all types of dip and ultrasonic applications. Techniclean MP 2 effectively removes soluble oils, light duty neat cutting or forming oils, lubrication oils, soft film corrosion preventives, swarf and general dirt.

    Learn More

    Starting at: Excl. Tax: £194.25 Incl. Tax: £235.04

  • Castrol Performance Bio HE 32

    CASTROL Performance Bio HE 32

    Biodegradable hydraulic oil

    Application CASTROL Performance Bio HE 32

    Performance Bio HE is intended for use in all hydraulic systems, where there is a risk that leaking fluid will contaminate ground water and the sewage system, such as in earthmoving machinery, refuse collection lorries, agricultural and forestry machinery, rail vehicles, presses and wrapping machines. Thanks to the carefully selected base oil, it can be used up to +120 °C. The viscosity index has a high value which means that the viscosity of the product depends relatively little on the temperature. The environmentally friendly nature, measured according to the CEC L-33-A-93 test is >90%. Performance Bio HE is not miscible with water. Performance Bio HE is miscible with hydraulic fluids based on mineral oil and vegetable or synthetic esters. Nevertheless, when switching from mineral oil based hydraulic fluids to Performance Bio HE it is recommended to empty the system completely as mixing with mineral oil reduces biodegradability and may lead to foaming problems. Performance Bio HE meets the requirements according to VDMA 24568 for a HEES (Hydraulic Environmental Ester Synthetic).

    Learn More

    Starting at: Excl. Tax: £195.14 Incl. Tax: £236.12

  • Castrol Calibration Oil 4113

    CASTROL Calibration Oil 4113

    Diesel Injector Test Fluid

    Application CASTROL Calibration Oil 4113

    Calibration Oil 4113 is a calibration and storage oil for diesel fuel injectors, conforming fully with ISO 4113 and Lucas CAV 7-10-106 (now obsolete) specifications. The rust preventative properties of this oil are such that, without cleaning of the equipment after calibration, proper functioning of the equipment is ensured after one years storage in normal conditions. Whilst Calibration Oil 4113 contains no harmful additives it is a light mineral oil and will have a de-fatting effect upon unprotected skin. Use of a barrier cream or otherprotection is recommended when in contact with this product.

    Learn More

    Starting at: Excl. Tax: £199.09 Incl. Tax: £240.90

  • Castrol CareCut ES 2

    CASTROL CareCut ES 2

    High performance neat cutting oil

    Application CASTROL CareCut ES 2

    CareCut ES 2 is designed for high speed, creep feed and gear grinding of ferrous and non ferrous metals. It can also be used for drilling and general machining applications, as well as for hard metal and tool grinding. CareCut ES 2 does not contain active sulphur and is hence compatible with yellow metals.

    Learn More

    Starting at: Excl. Tax: £208.89 Incl. Tax: £252.76

Items 21 to 40 of 73 total

Set Descending Direction
per page