Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Klübertec ST 4-701

Your benefit: pallet advantage from 2 barrels
QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + 200 L £ 0,00 £ 2744,33 £ 0,00
- + 20 L £ 0,00 £ 397,89 £ 0,00
Total
£ 0,00

Klüber Klübertec ST 4-701

Stamping and forming fluid

Application Klüber Klübertec ST 4-701
  • Blanking & drawing of steel and non-ferrous sheet metal between 0.2 and 2.5 mm thick
  • Rolling, deep drawing, edging and folding, e.g. in the manufacture of drum lids
  • Preserving steel components, e.g. brake parts
  • Corrosion protection of assembly components

Product Description

Details

Performance, Features & Benefits of Klüber Klübertec ST 4-701 are:

  • Excellent stamping and cutting properties
  • Compatibility with paints without pre-degreasing of metal components after processing
  • Micro-dosage
  • Low consumption

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Klübertec ST 4-701

Klübertec ST 4-701 is a thin-bodied mixture of ester oil and aliphatic hydrocarbons. Its synthetic structure provides improved lubricity during the stamping of metal sheets plus a wear reducing effect on machine tooling. The solvent contained (90 %) evaporates upon application so that subsequent processes (welding, glueing, painting) are not affected in most cases.
 

Typical Characteristics

Product specifications   Method

Klüber Klübertec ST 4-701

Article number     046067
Appearance     clear to slightly turbid
Colour space     yellow
Density  20 °C  DIN 51757 approx. 0.79 g/cm³
Flash point, Pensky-Martens, closed cup 60 - 72 °C   DIN EN ISO 2719  
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
original container, approx.
    24 months

 

Application notes

The product can be applied by  spraying; rolling (felt rollers); spot application; immersion over the entire width of the sheet or on predetermined parts. The lubricating film thickness can be increased by adding Klüberfluid 9 R 100, thus increasing the forming capacity, e.g. forming of sheets to a thickness up to 3 mm and draw depth of 100 mm (steel sheets to a thickness of approximately 1.5 mm). Evaporation upon process completion can be accelerated by moving air (fan, etc.) or heat (not above 60 °C).
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No

You may also be interested in the following product(s)

Klüber Klübertec ST 4-702

Klüber Klübertec ST 4-702

Starting at: Excl. Tax: £278.94 Incl. Tax: £278.94