Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Klüberbio LG 39-700 N

Your benefit: pallet advantage from 2 barrels
QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + 180 Kg £ 0,00 £ 6080,71 £ 0,00
- + 25 Kg £ 0,00 £ 1392,84 £ 0,00
- + 1 Kg £ 0,00 £ 120,26 £ 0,00
Total
£ 0,00

Klüber Klüberbio LG 39-700 N

Eco-compatible operating lubricant for open gear drives

Application Klüber Klüberbio LG 39-700 N

Klüberbio LG 39-700 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.

Product Description

Details

Performance, Features & Benefits of Klüber Klüberbio LG 39-700 N are:

  • Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the 2013 Vessel General Permit
  • Lower environmental impact in the event of leakage. The base oil consists of renewable raw materials and is ultimately biodegradable
  • Good low-temperature behaviour enables operation of open gear drives in cold conditions
  • Selected additives ensure longer component life and reduced wear
  • Cost reduction due to low consumption when applied by selected spraying systems
  • Meets requirements for OSPAR conformance, including Norway Yellow 1, Denmark (registration number 2458948) and Cefas E (registration number 27423)

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Klüberbio LG 39-700 N

Are you a manufacturer or operator of open gear drives, jack-up lifting systems or other on-board equipment that is frequently in contact with sea water? In that case you are likely to be interested in obtaining an eco-friendly, high-performance operating lubricant. Our Klüberbio LG 39-700 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces. The high-viscosity base oil of Klüberbio LG 39-700 N comes from 100 % renewable resources. Klüberbio LG 39-700 N complies with the requirements for classification as an Environmentally Acceptable Lubricant (EAL) in terms of biodegradability, toxicity and bioaccumulation, as defined by the US Environmental Protection Agency for the "2013 Vessel General Permit". Due to the lubricant's excellent low-temperature behaviour, it can be pumped in centralised lubricating systems down to -30 °C and sprayed even at 0 °C. These positive product characteristics enable you to use the lubricants over a wider temperature range than what is common with mineral-oil-based greases of the same base oil viscosity. Klüberbio LG 39-700 N enables a further reduction of more than 50 % in lubricant consumption in jack-up lifting systems if spray application is used. This will further reduce your operating costs and is beneficial to the environment.
 

Typical Characteristics

Product specifications :   Klüber Klüberbio LG 39-700 N
Article number   009054
Vessel General Permit   passed
Biodegradability according to OECD 301 F, (within 28 days)   >= 60 %
Chemical composition, type of oil   natural ester
Chemical composition, thickener   calcium soap
Lower service temperature   -30 °C / -22 °F
Upper service temperature   100 °C / 212 °F
Colour space   beige
Texture   homogeneous
Density at 20 °C   approx. 0.93 g/cm³
Worked penetration,  25 °C, lower limit value DIN ISO 2137 355 x 0.1 mm
Worked penetration,  25 °C, upper limit value DIN ISO 2137 385 x 0.1 mm
Kinematic viscosity of the base oil,  40 °C DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 approx. 680 mm²/s
Kinematic viscosity of the base oil,  100 °C DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 approx. 90 mm²/s
Flow pressure of lubricating greases,  test temperature: -30 °C DIN 51805-2 <= 1 400 mbar
FZG scuffing test, based on  scuffing load stage DIN ISO 14635, A/2,76/50 > 12
Four-ball tester, welding load,  DIN 51350 pt. 04 >= 5 500 N
Drop point,  DIN ISO 2176, IP 396 >= 100 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
original container, approx.
  24 months

 

Application notes

Klüberbio LG 39-700 N can be continuously applied by means of transfer pinion lubrication, spray systems or by brush. The required lubricant quantity depends on the operating conditions in each individual case. Our sales engineers will be pleased to assist you in determining lubricating quantities.
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No

You may also be interested in the following product(s)

Klüber Klüberbio LG 39-701 N

Klüber Klüberbio LG 39-701 N

Starting at: Excl. Tax: £125.98 Incl. Tax: £125.98