46 mm2/sec ISO VG olie

Q8 Hoffmeister 46

Zinc- and detergent-based hydraulic oil with high viscosity index

Applications Q8 Hoffmeister 46

Q8 Hoffmeister 46 is perfect for usage for hydraulic systems in off-road applications and mobile construction equipment. Thanks to its detergent functionalities, this oil is the ideal solution for hydraulic systems where water and pollution can be a problem. It can be used in the most extreme temperatures: from high to low.

Your advantage! Price of Q8 Hoffmeister 46 drops automatically in larger quantities.

Shell Tellus S4 VE 46

Advanced Synthetic Shear Stable Hydraulic Oil

Shell Tellus S4 VE 46 main applications:

• Mobile hydraulic systems
• Industrial hydraulic systems
• Wind Turbines
• Marine Hydraulic Systems
• Premium Wear Protection
• Sub-arctic to extreme desert heat operations

Shell Tellus S4 VE hydraulic fluids are based on Gas-to-liquid (GTL) technology and are designed for a broad range of stationary and mobile applications, with their extra-long oil life, wide operating temperature window, impactful energy efficiency, and robust equipment protection. Shell Tellus S4 VE enables customers to realise potential cost savings through longer equipment service life and lower maintenance costs.

Please note!! Price of Shell Tellus S4 VE 46 drops automatically in larger quantities.

Klüber Summit DSL 46

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 46

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Shell Turbo S4 GX 46

Premium based industrial steam, gas and combined cycle turbine lubricant for geared turbines

Application Shell Turbo S4 GX 46

Power and industrial steam, gas & combined cycle turbines. Shell Turbo S4 GX 46 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines, especially those needing enhanced anti-wear performance to protect highly loaded gearboxes.

Further industrial applications. Shell Turbo S4 GX 46 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors

TOTAL CIRKAN RO 46

R and O type machine oils.

Applications CIRKAN RO 46

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 46 drops automatically in larger quantities.

TOTAL PRESLIA GT 46

High performance long life gas turbine oils for severe applications

Applications TOTAL PRESLIA GT 46

PRESLIA GT oils are:

• specially designed for the lubrication (bearings, gear boxes) and control circuit of steam and gas turbines
• turbines submitted to high thermal stress
• suitable for turbine coupled gears lubrication

Your advantage! Price of TOTAL PRESLIA GT 46 drops automatically in larger quantities.

TOTAL HYDRANSAFE HFC 146

Fire resistant hydraulic fluid.

Applications TOTAL HYDRANSAFE HFC 146

• HYDRANSAFE HFC 146 is a high performance synthetic water-polymer, fireresistant hydraulic fluid.
• regulation and hydraulic circuits of Furnaces, Continuous Casting Units in the Steel and Aluminium Industry, Heat-treat Ovens for quenching operations, Drying Furnace and other applications in fire risk areas, as in mining industry
• Hydraulic systems of mould injection machines.
• Operating temperature range is from - 20 °C to + 60 °C.
• When changing from a mineral oil based hydraulic system components and to apply an appropriate cleaning of the hydraulic system

Your advantage! Price of TOTAL HYDRANSAFE HFC 146 drops automatically in larger quantities.

Mobil DTE 746

Premium Turbine Oils

Application Mobil DTE 746

Mobil DTE 700 Series are designed to meet or exceed the requirements of circulation systems of steam and gas turbines. Specific applications include Electric power generation for high output base load utilities. Gas Turbine Combined Cycle Power Plants operating in base load or peak generation modes. Gas turbines in Captive Power plants. Gas or steam turbine prime movers. Hydroelectric turbine applications

Mobil Vacuoline 146

Circulating Oils

Application Mobil Vacuoline 146

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil DTE 846

Superior Performance Turbine Oils

Application Mobil DTE 846

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

TOTAL EQUIVIS XV 46

Very high viscosity index anti-wear hydraulic oils with high shear resistance.

Applications TOTAL EQUIVIS XV 46

• Equivis XV is a range of anti-wear hydraulic fluids recommended for all kind of hydraulic circuits operating within a very wide temperature range.
• Their excellent viscosimetric properties and their high shear resistance make the oils especially suitable for the use in mobile machines hydraulic systems intended for cold regions or which have to work in low temperature environments such as cold stores.

Your advantage! Price of TOTAL EQUIVIS XV 46 drops automatically in larger quantities.

Mobil Vacuoline 546

Circulating Oils

Application Mobil Vacuoline 546

These oils are intended primarily for the lubrication of plain bearings, roller bearings, parallel shaft and bevel gearing. They are suitable as multipurpose lubricants in systems not subject to shock loading and which do not require extreme pressure performance. The Mobil Vacuoline 500 series possess good demulsibility that is retained under conditions of severe water contamination. Mobil Vacuoline 500 series are used in applications using splash, bath and ring oil arrangements and all other application methods involving pumps, valves and auxiliary equipment. They are recommended for use in hydraulic systems where higher viscosity oils are specified. They are particularly resistant to the effects of prolonged high temperature exposure and perform well in circulating systems with short oil residence times. Typical applications include: No Twist Rod Mills. Moderate duty spur, bevel, helical and herringbone gear units. Circulating systems. Mobil Vacuoline 525, 528, 533 can also be used in hydraulic systems employing gear, vane, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required. Certain compressors and vacuum pumps handling air and inert gases provided the discharge temperatures do not exceed 150oC , not suitable for breathing air compressors

Klübersynth GH 6-46

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-46

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Plantoflux 46 AT-S

Synthetic fire-resistant hydraulic fluids based on organic esters, type HFDU

Plantoflux 46 AT-S field of applications:

PLANTOFLUX-AT-S are primarily used as fire resis-tant hydraulic fluids in machines or plants operating in hazardous conditions, i.e. where naked flames or high temperatures arepresent and the fire riskcaused by the fluid leakage is high, most notably: steel mills, blast furnaces, continuous casting ma-chine, coke plants, etc.PLANTOFLUX-AT-S are generally applicable in any hydraulic systems where environmental protection and biodegradability are a priority.

Please note!! Price of Plantoflux 46 AT-S drops automatically in larger quantities.

Shell Corena S3 RX46

Premium Screw Compressor Oil long life oil

Benefits of the Corena S3 RX 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 RX 46 is a premium quality synthesized air compressor oil, based on Shell’s advanced Gas-to- Liquids (GTL) base oil technology combined with an advanced performance additive system. It is designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions.

Your advantage: Price Shell Corena S3 RX 46 drops automatically with larger quantities.