Industry & Manfacturing lubricants

Mobil Pegasus 610

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 610 are:

• + Gas engines operating on fuel that contains moderate levels of hydrogen sulphide (H2S)
• + Engines operating on fuel containing other corrosive components such as TOHCl (Total Organic Halides as Chloride)
• + Spark ignited four-stroke cycle gas engines with very low oil consumption
• + Reciprocating compressors operating on natural gas that contains sulphur or halogens
• + High output or naturally aspirated engines operating at or in excess of rated capacity under high temperatures

Pay attention! Price of Mobil Pegasus 610 drops automatically with higher volumes.

Mobil Univis™ N 68

Preservative

Application Mobil Univis™ N 68

• Univis N can be used in a wide range of applications, in industry, contracting and shipping.
• Systems with frequent cold start and high operating temperatures.
• Applications requiring anti-wear properties.
• Applications containing gears and bearings where mild anti-wear properties are required.
• Applications where high pressure loads occur and anti-wear properties are required.
• Applications where moisture is present and good corrosion protection is necessary.
• Machines where components of different metals and alloys are used.
  
  

Your advantage! Price of Mobil Univis™ N 68 drops automatically in larger quantities.

Q8 Wagner NS 68

High performance slideway oil

Applications Q8 Wagner NS 68

Q8 Wagner NS 68 is used in vertical slide ways of machine tools. This oil is also applicable in systems requiring CLP (industrial gear oils) or HLP (hydraulic oils) specifications.

Your advantage! Price of Q8 Wagner NS 68 drops automatically in larger quantities.

TOTAL DACNIS 100

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 100

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 100 drops automatically in larger quantities.

TOTAL CARTER EP 1000

Mineral oils for enclosed gears.

Applications TOTAL CARTER EP 1000

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:

• bevel and spur gears
• bearings and gear couplings
• worm gears.

Your advantage! Price of TOTAL CARTER EP 1000 drops automatically in larger quantities.

Shell Tellus S2 V100 (Formerly Shell Tellus T100) has been improved and is now called Shell Tellus S2 VX100 !

Hydraulic oil ISO VG100 with a wide temperature range

Examples of application of Shell Tellus S2 VX 100 are:

• + Hydraulic excavators and other earthmoving equipment
• + Port cranes and lifting equipment such as forklifts
• + Hydraulic driven equipment on board ships
• + Any mobile exterior hydraulic system

Shell Tellus S2 VX 100 fluids are high-performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures. Shell Tellus S2 VX 100 resist breakdown under heat or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.

Pay attention! Shell Tellus S2 VX100 Price falls automatically for larger quantities.

Q8 Hyaydn 15

Applications 

Q8 Haydn 15 hydraulic oils are recommended for all machine tool hydraulic systems, particularly where superior anti-wear and filterability are of prime importance. Also recommended for hydraulic control systems and robotics where oil quality is essential for accuracy and consistency.

Summary of Main Features and Benefits of Q8 Haydn 15 

Optimum anti-wear performance, based on a zincdiakyldithiophosphate additive 

Long service life due to high thermal and oxidation stability for high temperature applications 

Q8 Haydn 15 guarrantees trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability characteristics 

Can also be applied in other industrial equipment such as screw-air compressors and not severely loaded gears 

Q8 Holst 46

Applications Q8 Holst 46

Zinc-free and ashless hydraulic product to be used in hydraulic systems equipped with fine filters, or systems not compatible with zinc based anti-wear hydraulic oils

Your advantage! Price of Q8 Holst 46 drops automatically in larger quantities.

Q8 Haydn 10

Applications 

Q8 Haydn 10 hydraulic oils are recommended for all machine tool hydraulic systems, particularly where superior anti-wear and filterability are of prime importance. Also recommended for hydraulic control systems and robotics where oil quality is essential for accuracy and consistency.

Summary of Main Features and Benefits of Q8 Haydn 10 

Optimum anti-wear performance, based on a zincdiakyldithiophosphate additive 

Long service life due to high thermal and oxidation stability for high temperature applications 

Q8 Haydn 10 guarantees a trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability characteristics 

Can also be applied in other industrial equipment such as screw-air compressors and not severely loaded gears 

Shell Omala S2 GX 680 (Formerly Omala S2 G 680)

Industrial gear oil

Shell Omala S2 GX 680 (formerly Omala S2 G680) this high viscous (thick) gear oil protects standard industrial gearboxes. Think of Gearboxes and Worm wheels that are not suitable for PAGs.

Main uses of Shell Omala S2 GX 680 are:

• + Industrial gear transmissions with closed sump
• + Heavily loaded systems with oil lubrication and circulation systems
• + Non-gear related applications (roller bearings and other (steel on steel) parts with splash or forced circulation systems).

The excellent protection against high loads, the excellent protection against micro-pitting and compatibility with elastomers and paint offer superior performance in gears with closed sump.

Please note ! Price Shell Omala S2 GX 680 drops automatically with larger quantities.

Shell Turbo Oil T 68

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo Oil T 68 main applications:

Shell Turbo Oils T 68 are available in ISO grades 32, 46, 68 & 100 and are suited for application in the following areas:

• Industrial steam turbines & light duty gas turbines which require no enhanced anti-wear performance for the gearbox;
• Hydroelectric turbine lubrication;
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 68 have long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo Oils T 68 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.
Shell Turbo Oils T 68 are formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Please note!! Price of Shell Turbo Oil T 68 drops automatically in larger quantities.

Shell Morlina S2 B 150 Previously Morlina 150

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 150 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 150 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 150 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 150 drops automatically with larger quantities.

TOTAL CERAN XS 80

Very low temperature synthetic calcium sulfonate complex grease - Extreme-pressure

Applications CERAN XS 80

• CERAN XS 80 is a synthetic heavy duty extreme pressure grease, specially designed for applications working under very low temperatures conditions
• CERAN XS 80 is pre-eminently suitable for lubrication of industrial, and ‘heavy duty’ off-road applications working in very low temperature environments.
• CERAN XS 80 is also used as a protection grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL CERAN XS 80 drops automatically in larger quantities.

Shell Turbo Oil T 46

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo T 46 main applications:

• Industrial steam turbines & light duty gas turbines requiring no enhanced anti-wear performance for the gearbox
• Hydroelectric turbine lubrication
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 46 has long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo T 46 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.

Pay attention! Price of Shell Turbo Oil T 46 drops automatically in larger quantities.
Do you need more than 20x 209L ask for our special price

Q8 Goya 68

Applications Q8 Goya 68

Industrial gears and circulation systems

Your advantage! Price of Q8 Goya 68 drops automatically in larger quantities.

Q8 da Vinci P 6

A concrete mould release agent designed to give the work-piece a smooth surface finish, whilst ensuring easy release

Applications Q8 da Vinci P 6

The Q8 da Vinci range has been specifically developed for concrete demoulding where the oil creates a layer between the concrete and the mould

This layer is a critical part of the process as the chemistry of the product will cause soap formations at the interface

Q8 da Vinci P 6 is typically used for demoulding of: Prefab sewage pipes, On site elements

Your advantage! Price of Q8 da Vinci P 6 drops automatically in larger quantities.

Mobil Nuto H 68

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 68 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Mobil DTE 24 Ultra previously DTE24

Mobil Industrial Hydraulic Oils

Most important applications of Mobil DTE 24 Ultra are:

• + Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products
• + Hydraulic systems requiring a high load-carrying capability and anti-wear
• + protection, and when thin oil-film corrosion protection is an asset
• + Where small amounts of water are unavoidable
• + Systems containing gears and bearings
• + Machines employing a wide range of components using various metallurgy

Shell Tonna S3 M 32 Previous Name: Shell Tonna S 32

Premium machine tool slideway oils

Shell Tonna S3 M 32 main applications:

• Machine tool slideways, tables and feed mechanisms
• Machine tool hydraulic systems
• Machine tool gearboxes and spindles
• They are especially recommended in cases where high precision and low-speed machines are used as well as in combined lubrication systems.
   

Shell Tonna S3 M 32 oils are specially designed for the lubrication of machine tool slides, tables and feed mechanisms. Their enhanced tackiness and stick-slip characteristics are combined to offer superior frictional performance on slideways.

Pay attention! Price of Shell Tonna S3 M 32 drops automatically in larger quantities.

TOTAL MULTIS EP 00

Multi purpose extreme pressure semi-fluid lithium/calcium grease

Applications TOTAL MULTIS EP 00

• MULTIS EP 00 is especially developed for the lubrication of closed gears, can also be used for chassis lubrication by means of a centralized system for which NLGI 00 grade greases are recommended.
• Central lubrication systems found on trucks, off-road vehicles used in agriculture civil engineering, and industry.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

Your advantage! Price of TOTAL MULTIS EP 00 drops automatically in larger quantities.