Automotive sector lubricants

Shell Helix Ultra Racing 10W-60 

Fully synthetic motor oil - Shell's most advanced formulation for high-performance engines

Shell Helix Ultra Racing 10W-60 main applications:

• Extreme-performance engines and racing conditions can cause excessive wear of bearings and other engine components. Shell Helix Ultra Racing has been formulated with a higher viscosity to provide exceptional bearing protection under extreme performance and racing conditions compared with lower viscosity oils.
• Shell Helix Ultra Racing is designed for modified engines and racing engines using gasoline, diesel and gas, and it is also suitable for biodiesel and gasoline/ethanol blends.
   

Designed to meet the demanding requirements of particular high-performance engines, including those requiring API SN or ACEA A3/B4.

Please note!! Price of Shell Helix Ultra Racing 10W-60 drops automatically in larger quantities.

Q8 Gear Oil XG 80W-90

Automotive universal transmission lubricant

Applications Q8 Gear Oil XG 80W-90

In synchronised and non-synchronised manual transmissions, axles and drive line components requiring API GL-4/GL-5 performance level.

Approved by Scania in certain categories for use in extended drain application (180000 km).

Your advantage! Price of Q8 Gear Oil XG 80W-90 drops automatically in larger quantities.

Shell Shell Helix Ultra SP 0W-20 previously Shell Helix Ultra SN 0W-20

Fully synthetic motor oil - The next oil generation for oil cleanliness

Shell Helix Ultra SP 0W-20 main applications:

• Shell Helix Ultra SP’s fully synthetic formulation offers Shell’s maximum protection in very hot and extremely cold climates, and severe driving conditions

Shell Helix Ultra SP uses its latest active cleansing technology to help gasoline engines operate to their full potential by keeping them as close as possible to factory clean. It provides unsurpassed sludge and wear protection

Shell Helix Ultra A5/B5 0W-30 Previous Name:

Fully synthetic motor oil - Shell's most advanced formulation for high performance engines

Shell Helix Ultra A5/B5 0W-30 main applications:

• Shell Helix Ultra's fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates, and severe driving conditions
• Shell Helix Ultra A5/B5 can be used for gasoline, diesel and gas engines, and it is also suitable for biodiesel and gasoline/ethanol blends and where A5/B5 0W-30 grades are recommended, such as for certain Volvo cars.
   

Shell Helix Ultra 0W30 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It helps to reduce engine friction to provide enhanced fuel economy.

Please note!! Price of Shell Helix Ultra A5/B5 0W-30 drops automatically in larger quantities.

Product description Mobil 1 ™ FS 0W40

• Engines with the latest technologies, including turbo-chargers, direct injection, diesel (without DPF) and hybrid cars
• High-performance engines
• Most operating conditions, from mild to extreme

Your advantage: Price Mobil 1 FS 0W40 drops automatically with larger quantities.

Castrol Power RS Racing 4T 5W-40

Properties

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

Castrol EDGE FST 0W-40

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Shell Helix Ultra 0W-40

Fully synthetic motor oil - Shell's most advanced formulation for high-performance engines

Shell Helix Ultra 0W-40 main applications:

• Shell Helix Ultra's fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix Ultra 0W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It helps to reduce engine friction to provide enhanced fuel economy

Please note!! Price of Shell Helix Ultra 0W-40 drops automatically in larger quantities.

Shell Spirax S3 ALS 85W-90 previously Spirax S3 ALS 85W-90

High performance, GL-5 axle oil for limited slip differentials

Shell Spirax S3 ALS 85W-90 main applications:

• Suitable for heavy duty vehicles, including construction machines or buses, and passenger cars which are fitted with limited slip differentials.
• May be used in other moderate to heavily loaded gear sets that will allow use of a friction modified, hypoid gear oil.
• Specifically suitable for ZF units including Liebherr where a limited slip fluid is required.

Shell Spirax S3 ALS 85W-90 oil is blended for use in a wide variety of automotive axle units with limited slip differentials including many ZF units.

Castrol EDGE FST 10W-60

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is available in the following grades: 0W-20, 5W-20, 5W-30, 5W-30 A3/B4, 5W-30 C3, 5W-40, 5W-40 Turbo Diesel, 5W-50, 10W-30, 10W-40 and 10W-60.

Shell TF DCT-F3

Shell TF DCT-F3 is a high performance Dual Wet Clutch transmission fluid.

Applications of Shell TF DCT-F3 are:

• Lubrication of the dual wet clutch and the hydraulic system of GETRAG’s Powershift 7DCL750 transmissions.
  
  

Shell TF DCT-F3 combines advanced DCT additive technology with high quality base oils and excellent wet clutch friction stability.

Your advantage: Shell TF DCT-F3 Automatic price reduction for larger order quantities

TITAN SINTOPOID FE 75W-85

Fully-synthetic, fuel-economy passenger car axle fluid offering increased gearbox efficiency in passenger cars due to low viscosity level. Reduces fuel consumption and offers best properties at low temperature. Suitable as fill for life fluid according to manufacturer

TITAN SINTOPOID FE 75W-85 field of applications:

TITAN SINTOPOID FE 75W-85 is miscible and compatible with conventional branded gear oils. However, intermixtures with other gear oils should be avoided in order to fully utilise the product’s benefits. Consequently a complete oil change is recommended when converting to TITAN SINTOPOID FE 75W-85.

Please note!! Price of TITAN SINTOPOID FE 75W-85 drops automatically in larger quantities.

Carix Premium Longlife YELLOW -38C

coolant is ready and can be used all year in all types of water cooled car and industrial combustion engines. Protects against freezing, overheating, corrosion and ensures unrestricted circulation in the cooling system. Uses biodegradable corrosion inhibitors. Contains no nitrates, amines and phosphates ( NAP-free).

The specific corrosion and sludge resistant properties are only achieved when using OAT coolant. Carix Premium Longlife coolant every 250,000 km or according to the instructions of the car manufacturer. Always use the same colour coolant. 
Color: YELLOW.
Frost protection -38 C.

Carix Premium Longlife YELLOW -38C has the following approvals:

Glysantin® G40® Red -38C ready to use

Coolant based on ethylene glycol prediluted 50/50

Glysantin G40 contains a corrosion inhibitor package based on salts of organic acids and silicates (Si-OAT coolant). Glysantin G40 is free of nitrites, amines, phosphates and borates.

Glysantin G40 fulfills the requirements of the following coolant standards:

AS 2108-2004, ASTM D 3306, ASTM D 4985, ASTM D 6210, SAE J1034, ÖNORM V 5123, CUNA NC 956-16, JIS K 2234:2006, SANS 1251:2005, SH 0521-1999 and BS 6580:2010

Glysantin G40 is officially approved by the following OEMs: