Klüber Wolfracoat C Fluid

Performance, Features & Benefits of Klüber Wolfracoat C Fluid are:

• Very good corrosion protection → increased component lifetime
• Ready-for-use → just mix vigorously
• Low consumption → low costs, high efficiency
• Easy application → reduces maintenance time
• Easier to mix in smaller canisters → less effort required
• No part-used stock → the 5 l pack size matches the tank of the Klübermatic KD spray pump

Typical Characteristics

Application notes

WOLFRACOAT C FLUID is usually applied to the area between the tyre and the kiln shell with the Klübermatic KD manual spray jet equipment (other commercially available spray devices can also be used). In other cases the product can also be applied by brush. Each tyre should be relubricated once a week with 2-3 litres of WOLFRACOAT C FLUID according to the tyre width. It is important to ensure relative motion between the tyre and the kiln shell. We recommend reference to the relative motion value stated by the OEM (between 10 and 30 mm). NOTE: Always shake WOLFRACOAT C FLUID vigorously prior to application, as the solid lubricants tend to settle out during storage. Without agitation, the spray jet would be filled only with the oil component, which would not provide dry lubrication following evaporation. Additionally, the oil component has an auto-ignition point of approx. 370 °C which may constitute a risk.