Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Syntheso HT 1000

Your benefit: pallet advantage from 2 barrels
QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + 180 Kg £ 0,00 £ 6576,32 £ 0,00
- + 20 Kg £ 0,00 £ 911,00 £ 0,00
Total
£ 0,00

Klüber Syntheso HT 1000

Synthetic long-term and high-temperature oils

Application Klüber Syntheso HT 1000

SYNTHESO HT oil are used for the lubrication of spur and bevel gears and rolling bearings such as spherical roller bearings in bowl mill crushers, plain bearings and gear couplings subject to high temperatures and high surface pressure. Substantially less friction and powerful protection against wear are major benefits of these products.

Product Description

Details

Performance, Features & Benefits of Klüber Syntheso HT 1000 are:

  • Synthetic long-term and high-temperature oils
  • Very good viscosity/ temperature properties
  • Reduce friction
  • High scuffing load capacity
  • Good anti-wear properties

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Syntheso HT 1000

SYNTHESO HT are long-term and high-temperature oils on a polyglycol basis. They have a high scuffing load capacity and protect well against wear. In the FZG test, DIN 51 354, A/8, 3/90, their scuffing load stage is >12 and their work-related change in weight is ≤ 0.2 mg/kWh. SYNTHESO HT oils have excellent ageing and oxidation stability and very good viscosity/ temperature properties and are ideal for high temperatures.
 

Typical Characteristics

Product specifications   Method

Klüber Syntheso HT 1000

Article number     012049
ISO viscosity grade    DIN ISO 3448  1 000
Lower service temperature  -20 °C / -4 °F    
Upper service temperature  150 °C / 302 °F    
Density 20 °C  DIN 51757  approx. 1.07 g/cm³
Kinematic viscosity 40 °C  DIN 51562 pt. 01/ASTM D-445/ASTM D 7042  approx. 1 000 mm²/s
Kinematic viscosity  100 °C DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 approx. 165 mm²/s
Viscosity index   DIN ISO 2909 >= 275
Pour point  <= -20 °C DIN ISO 3016  
Flash point, Cleveland, open-cup apparatus >= 200 °C  DIN EN ISO 2592  
FZG scuffing test, change in weight    DIN ISO 14635-1, A/8.3/90

 <= 0.2 mg/kWh

FZG scuffing test, scuffing load stage    DIN ISO 14635-1, A/8.3/90 > 12
Minimum shelf life from the date of manufacture - in a dry, frost-free place
and in the unopened original container, approx.
   

 36 months

 

Application notes

SYNTHESO HT oils are often used for immersion lubrication. Immersion circulation and injection lubrication are supported as well provided that you do not exceed the viscosity limits of the pumps or the entire system. SYNTHESO HT oils are not miscible with mineral oils and synthetic hydrocarbons. Therefore, you are advised to clean the lubrication points before SYNTHESO HT oils are introduced. Because of their high viscosity, be careful about rinsing with SYNTHESO HT. Experience shows that contamination of up to about 5% with mineral oils and hydrocarbons will not be critical. Beyond that level, you should drain the oil once more when it is at operating temperature and completely refill the system with fresh oil. SYNTHESO HT oils are neutral towards ferrous materials and virtually all non-ferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic stress (sliding speed and high loads). It may be necessary to carry out wear tests. Depending on temperature and time of exposure, synthetic lubricants based on polyglycol may affect the functionality of rubber-elastic sealing materials. Seals made of NBR materials (acrylonitrile butadiene rubber) can be used at permanent temperatures up to 100 °C. For higher temperatures, it is advisable to use seals based on FPM (fluoropolymers) as those elastomers are resistant to SYNTHESO HT oils. Be aware that different elastomer qualities from the same or different manufacturers will behave differently. Coats of paints may be attacked by synthetic lubricants. When applying SYNTHESO HT oils we recommend the use of twocomponent (reactive) paints for interior coating. Oil inspection glasses should preferably be made of natural glass or polyamide materials. Other transparent plastics such as plexiglass tend to crack under stress. It is advisable to test the suitability of design materials, especially those intended for series application.
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No

You may also be interested in the following product(s)

Klüber Syntheso HT 1500

Klüber Syntheso HT 1500

Starting at: Excl. Tax: £947.03 Incl. Tax: £947.03