Klüber Klübersynth 100 KV

Performance, Features & Benefits of Klüber Klübersynth 100 KV are:

• Exclusively recommended for Leonardo weaving machines from ITEMA. With Klübersynth 50 KV, 80KV, 100 KV oils, these weaving machines attain an optimum service life. Oil change every 20,000 operating hours only.
• Cost reduction due to very good friction behaviour of the polyglycol base oil reducing power losses and improving efficiency.
• Reduced maintenance costs due to high scuffing load strength and good antiwear effect protecting gears and other lubricated components sufficiently against scuffing even at high peak loads.
• Excellent viscosity-temperature behaviour enables higher operational reliability due to sufficient component lubrication even at elevated or high machine temperatures.

Typical Characteristics

Application notes

Klübersynth 50 KV, 80 KV and 100 KV oils can be applied by immersion, immersion circulation or injection. When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. Klübersynth 50 KV, 80 KV and 100 KV oils are not miscible with mineral oil or synthetic hydrocarbons. Prior to changeover, we recommend cleaning the lubrication points or rinsing the gears or enclosed lubrication systems with Klübersynth 50 KV, 80 KV or 100 KV. Klübersynth 50 KV, 80 KV and 100 KV oils are neutral towards ferrous metals and almost all nonferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic loads. If necessary, preliminary wear tests should be carried out. Depending on the temperature and time of exposure, synthetic lubricants based on polyglycol can affect the function of rubber-elastic sealing materials. For permanent temperatures up to 100 °C (corresponds to the temperature limit of Klübersynth 50 KV, 80 KV and 100 KV), seals made of NBR (butadiene-acrylonitrile rubber) can be used. It should be noted that elastomers from one or several manufacturers can behave differently. When applying Klübersynth 50 KV, 80 KV and 100 KV oils, we recommend the use of two-component paints (reaction paints) for interior coating. Oil gauge glasses should preferably be made of natural glass or polyamide materials. Other transparent plastics, e.g. Plexiglas, have a tendency to crack under stress. We recommend to check compatibility of the materials with the lubricant used, especially prior to series application.