Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Klüberbio EG 2-150

Your benefit: pallet advantage from 2 barrels
QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + 200 L £ 0,00 £ 6264,56 £ 0,00
- + 20 L £ 0,00 £ 950,18 £ 0,00
Total
£ 0,00

Klüber Klüberbio EG 2-150

Environmentally compatible, synthetic high-performance gear oils

Application Klüber Klüberbio EG 2-150

Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.

Product Description

Details

Performance, Features & Benefits of Klüber Klüberbio EG 2-150 are:

  • Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
  • Ultimately biodegradable and not toxic to marine organisms reducing environmental impact in the event of leakage
  • Klüberbio EG 2 oils have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads
  • Standard NBR and FKM elastomers of the leading propeller shaft seal manufacturers are resistant to and approved for use with Klüberbio EG 2 oils, preventing leakages and impurities

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Klüberbio EG 2-150

Klüberbio EG 2 oils are ultimately biodegradable gear oils based on synthetic ester oil. They contain ≥90 % of renewable raw materials and achieve the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA's 2013 VGP (Vessel General Permit). Klüberbio EG 2-150 also complies with the European Ecolabel. The EU Ecolabel is a label of environmental excellence that is awarded to products and services meeting high environmental standards throughout their life-cycle: from raw material extraction, to production, distribution and disposal. Klüberbio EG 2 oils show a high shear stability and form a strong hydrodydamic oil film even when subject to high loads. They have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads.
 

Typical Characteristics

Product specifications :   Klüber Klüberbio EG 2-150
Article number   009030
Classification acc. to CLP -DIN 51517-3   corresponds to
EU Ecolabel registration number   DE/027/260
Marking acc. to DIN 51502   CLP E 150
Lower service temperature   -25 °C / -13 °F
Upper service temperature   120 °C / 248 °F
Density, based on DIN 51757) at 15 °C   approx. 927 kg/
Foam test,  sequence I/24 °C ASTM-D 892, ISO 6247 <= 100/10 ml
Foam test,  sequence II/ 93.5
°C
ASTM-D 892, ISO 6247 <= 100/10 ml
Foam test,  sequence III/24°C ASTM D 892, ISO 6247 <= 100/10 ml
Flash point,  Cleveland, open-cup
apparatus
DIN EN ISO 2592 >= 280 °C
Biodegradability according to OECD 301 F, (within 28
days)
   >= 60 %
Kinematic viscosity,  40 °C DIN 51562 pt. 01/ASTM D-445/
ASTM D 7042
approx. 150
mm²/s
Kinematic viscosity,  100 °C DIN 51562 pt. 01/ASTM D-445/
ASTM D 7042
approx. 18 mm²/
s
ISO viscosity grade,  DIN ISO 3448 150
Viscosity index,   DIN ISO 2909 approx. 135
Anticorrosive properties on steel, 
method A, steel, 24 h/60 °C
DIN ISO 7120 no rust corrosion
degree
Copper corrosion,  24 h/100°C  DIN EN ISO 2160 1 - 100 corrosion
degree
Pour point,  DIN ISO 3016 <= -25 °C
FZG scuffing test, A/8.3/90,
scuffing load stage
 DIN ISO 14635-1 > 13
Minimum shelf life from the date of manufacture - in a
dry, frost-free place and in the unopened original
container, approx.
  36 months

 

Application notes

In general, our completely biodegradable high-performance gear oils are miscible with mineral oils and synthetic hydrocarbons. However, a miscibility test should be performed in order to totally rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend cleaning the lube points or flushing the gear with the Klüberbio EG 2 oil to be used. The Klüberbio EG 2 oil to be used needsto be approved by the OEMs of the equipment. In case the oil is not approved or the equipment's specification has been changed - e.g. type, design or material of the sealing - we recommend consulting the OEM prior to the oil change. Owing to the many different elastomer compositions of seals we recommend - prior to series application - checking the compatibility and other influencing factors (e.g. maximum admissible water content in the oil) with the component under conditions similar to practice.
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No

You may also be interested in the following product(s)

Klüber Klüberbio EG 2-100

Klüber Klüberbio EG 2-100

Starting at: Excl. Tax: £843.13 Incl. Tax: £843.13

Klüber Klüberbio EG 2-68

Klüber Klüberbio EG 2-68

Starting at: Excl. Tax: £843.13 Incl. Tax: £843.13

Total Carter BIO 150

Total Carter BIO 150

Starting at: Excl. Tax: £235.45 Incl. Tax: £235.45

Shell Naturelle S4 Gear Fluid 150

Shell Naturelle S4 Gear Fluid 150

Starting at: Excl. Tax: £3,195.25 Incl. Tax: £3,195.25