Castrol oil & grease lubricants

Castrol EDGE FST 10W-60

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is available in the following grades: 0W-20, 5W-20, 5W-30, 5W-30 A3/B4, 5W-30 C3, 5W-40, 5W-40 Turbo Diesel, 5W-50, 10W-30, 10W-40 and 10W-60.

Castrol Vecton Long Drain 5W-30 E6/E9 previously Vecton Fuel Saver 5W-30

Helps Maximise Performance

Application Castrol Vecton Long Drain 5W-30 E6/E9

Castrol Vecton Long Drain 5W-30 E6/E9 is designed for better fuel economy in the latest Euro 6 diesel engines. It is also suitable for extended service intervals as recommended by many European engine manufacturers, including MercedesBenz and Volvo, and is approved for use in MAN Euro 6 engines. It can be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Castrol Transmax Universal 75W-90 previously Syntrax Universal 75W-90

Universal Fluid for manual transmissions and axles

CASTROL SPHEEROL AP 2

Bearing Grease

Application CASTROL SPHEEROL AP 2

Spheerol AP 2 and AP 3 are primarily intended for use in plain and anti-friction , ball and roller bearings besides other machinery applications. They are recommended for use under normal load conditions, within an operating temperature range of -20°C to +120°C. Due to the low viscosity used in these products, they are particularly suitable for high speed bearings. Spheerol AP 3 is suitable for severe vibaration conditions.

Your advantage! Price of CASTROL SPHEEROL AP 2 drops automatically in larger quantities.

CASTROL SPHEEROL AP 3

Bearing Grease

Application CASTROL SPHEEROL AP 3

Spheerol AP 2 and AP 3 are primarily intended for use in plain and anti-friction , ball and roller bearings besides other machinery applications. They are recommended for use under normal load conditions, within an operating temperature range of -20°C to +120°C. Due to the low viscosity used in these products, they are particularly suitable for high speed bearings. Spheerol AP 3 is suitable for severe vibaration conditions.

Your advantage! Price of CASTROL SPHEEROL AP 3 drops automatically in larger quantities.

CASTROL HYSPIN HVI 46 D

Detergent Hydraulic Oil

Application CASTROL HYSPIN HVI 46 D

Castrol Hyspin HVI 46 D also incorporates lubricity additives to give smooth slideway motion on the combined hydraulic and slideway lubrication systems of some grinding and gear cutting machine tools. Castrol HLP-D fluids contain detergency additives which maintain dirt and oil oxidation products in suspension, preventing them from settling out and forming deposits which could impair the free operation of valves, leading to erratic system operation. Machine tool manufacturer's are increasingly specifying HLP-D fluids such as Hyspin HVI 46 D, having recognised their advantages in increased system reliability.

Your advantage! Price of CASTROL HYSPIN HVI 46 D drops automatically in larger quantities.

CASTROL Radicool NF

Antifreeze coolant

Application CCASTROL Radicool NF

Castrol Radicool NF has been developed to meet the growing demand from engine and vehicle manufacturers for a higher performance coolant that minimises environmental impact. It provides excellent protection against corrosion, and because it contains no phosphate, the problems of deposits in some modern performance engines are eliminated. In addition to providing excellent corrosion and low temperature protection, the use of the recommended level of anti-freeze will significantly reduce the likelihood of wet cylinder liner pitting due to " cavitation erosion". Cavitation erosion is caused by the implosion of air bubbles present in the coolant, which are attracted to the liner outer surface. These bubbles implode, resulting in the removal of minute amounts of liner material - this, if allowed to continue unchecked, will result in liner porosity and severe engine damage.

CASTROL Axle Z Limited Slip 90

Axle fluid for limited slip differentials

Application CASTROL Axle Z Limited Slip 90

Suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required; it can also be used in conventional differentials. It is approved by ZF for use in their multi-disc wet brakes and self-locking differentials used in a range of commercial vehicle applications including axles in off-road and agricultural equipment.

CASTROL SPHEEROL EPL 1

Bearing grease

Application CASTROL SPHEEROL EPL 1

The Spheerol EPL 1 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 1 drops automatically in larger quantities.

CASTROL SPHEEROL EPL 00

Bearing grease

Application CASTROL SPHEEROL EPL 00

The Spheerol EPL 00 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 00 drops automatically in larger quantities.

CASTROL Hyspin Spindle Oil E 5

Spindle Oils

Application CASTROL Hyspin Spindle Oil E 5

Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

Your advantage! Price of CASTROL Hyspin Spindle Oil E 5 drops automatically in larger quantities.

CASTROL Perfecto X 32 previously Perfecto T 32

Turbine oils

Application CASTROL Perfecto X 32

The Castrol Perfecto X turbine oil range of lubricants is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

CASTROL Almaredge 230 K

High performance soluble metal working fluid

Application CASTROL Almaredge 230 K

Almaredge 230 K is especially designed for machining of aluminium alloys. The product can also be used for machining of low-medium alloyed steel.

Castrol Transmax Universal LL 80W-90 previously Syntrax Universal 80W-90

Universal fluid for manual transmissions and axles

CASTROL Hyspin Spindle Oil 10

Spindle Oils

Application CASTROL Hyspin Spindle Oil 10

Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

Your advantage! Price of CASTROL Hyspin Spindle Oil 10 drops automatically in larger quantities.

CASTROL Iloform PN 226

High performance neat cutting oil

Application CASTROL Iloform PN 226

Iloform PN 226 is specially formulated for use in single die and progressive die presses for medium to heavy deep drawing applications. It is suitable for use on steels, stainless steels and nickel alloy steels

CASTROL Rustilo DWX 30

Dewatering corrosion preventive

Application CASTROL Rustilo DWX 30

Rustilo DWX 30 rapidly removes water from components subsequent to electroplating processes, after machining using soluble cutting fluids, or parts that have been washed. The very thin residual film provides effective medium term protection against corrosion during intermediate storage or transportation. Rustilo DWX 30 can also be used as a lubricant for mild press working, where corrosion protection without further treatment is required. Although Rustilo DWX 30 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

Castrol Vecton Long Drain 5W-30 E7 previously Fuel Saver 5W-30 E7

Fuel-saving engine oil

CASTROL Rustilo DWX 32

Dewatering corrosion preventive

Application CASTROL Rustilo DWX 32

Rustilo DWX 32 is a medium to long term protective for use in severe conditions where a high degree of protection is required. It is ideal for protection of machined components prior to storage or transportation. The product also shows good water displacing properties. Although Rustilo DWX 32 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.