Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Specials

14 Item(s)

Set Descending Direction
per page

  • Klüber Klüberplex BEM 41-132

    Klüber Klüberplex BEM 41-132

    Speciality rolling bearing grease for demanding applications

    Application Klüber Klüberplex BEM 41-132

    Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings. For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings; cylinder roller bearings; spherical roller bearings or for-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section); textile machines (dry section); electric motors; hot air blowers; drying ovens; air separators in the base materials industry; generators in wind power plants or rolling bearings in vehicle components clutch bearings; generator bearings; water pump bearings; fluid fan bearings

    Learn More

    Starting at: Excl. Tax: £67.25 Incl. Tax: £81.37

  • Klüber Klüberplex BE 31-102

    Klüber Klüberplex BE 31-102

    Lubricating greases for extreme requirements

    Application Klüber Klüberplex BE 31-102

    Klüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.

    Learn More

    Starting at: Excl. Tax: £104.10 Incl. Tax: £125.96

  • Klüber Klüberplex BEM 41-141

    Klüber Klüberplex BEM 41-141

    Lubricant for rolling and plain bearings subject to high loads

    Application Klüber Klüberplex BEM 41-141

    Klüberplex BEM 41-141 has been especially designed for rolling bearings in wind turbines. The lubricant can be used for the initial lubrication and relubrication of rotor, generator and pitch bearings in wind power stations. Klüberplex BEM 41-141 can also be used for constant velocity joints in lateral and longitudinal shafts of vehicles as well as for highly loaded rolling and plain bearings subject to vibrations and oscillations.

    Klüber Klüberplex BEM 41-141 is particularly widely used in the wind industry for wind turbines.

    Learn More

    Starting at: Excl. Tax: £109.12 Incl. Tax: £132.04

  • Klüber Klüberplex BEM 34-132

    Klüber Klüberplex BEM 34-132

    Speciality rolling bearing grease for demanding applications

    Application Klüber Klüberplex BEM 34-132

    Klüberplex BEM 34-132 is used for ball bearings and linear guides, ball screws subject to oscillating motion, high loads and vibration. These may typically be found in: hub units (wheel bearings), shock absorber bearings, water pump bearings and cardan joint bushes in vehicles; guides in machine tools and working machines; linear bearings in wet processing zones of textile machines, paper-making machines, conveyors and pumps Klüberplex BEM 34-132 is also suitable as sealing grease for rolling bearings due to its excellent media resistance.

    Learn More

    Starting at: Excl. Tax: £137.71 Incl. Tax: £166.63

  • Klüber Klüberplex BE 31-222

    Klüber Klüberplex BE 31-222

    Lubricating greases for extreme requirements

    Application Klüber Klüberplex BE 31-222

    Klüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.

    Learn More

    Starting at: Excl. Tax: £263.47 Incl. Tax: £318.80

  • Klüber BARRIERTA L 55/2

    Klüber BARRIERTA L 55/2

    High-temperature long-term greases

    Application Klüber BARRIERTA L 55/2

    Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include:

    • conveyors (load and turn rollers)
    • kiln cart wheel bearings
    • calender bearings
    • fan bearings
    • chain bearings in film stretching stenters
    Learn More

    Starting at: Excl. Tax: £269.56 Incl. Tax: £326.17

  • Klüber ASONIC GLY 32

    Klüber ASONIC GLY 32

    Low-temperature lubricating grease for high-speed, low-noise rolling bearings

    Application Klüber ASONIC GLY 32

    ASONIC GLY 32 is used, for example, for the long-term or lifetime lubrication of rolling bearings in electric motors in applications where a low starting-up torque at low temperatures is required. As examples of the multitude of highly specialised applications of ASONIC GLY 32, the following may be mentioned:

    • miniature and small bearings in fans, motors and pumps contained in precision equipment household appliances and automobile air conditioners
    • integrated bearing units in audio and video equipment, computer peripherals and office equipment
    Learn More

    Starting at: Excl. Tax: £343.78 Incl. Tax: £415.97

  • Klüber Unisilkon F GLK 112

    UNISILKON F GLK 112

    Special lubricating grease for Bowden cables, seals and plastics

    Application UNISILKON F GLK 112

    UNISILKON F GLK 112 is primarily used for the lubrication of rubber-metal, plastic-metal or plastic-plastic friction pairings. Possible applications are in slideways, seals (also EPDM), Bowden cables and belt tensioners. In such applications, UNISILKON F GLK 112 reduces friction, thus preventing annoying squeaking noise.

    Learn More

    Starting at: Excl. Tax: £390.03 Incl. Tax: £471.94

  • Klüber POLYLUB GLY 501

    Klüber POLYLUB GLY 501

    Special synthetic lubricating greases for a wide application range

    Application Klüber POLYLUB GLY 501

    Vehicles Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals. Plain bearings Many types of plain bearing designs. POLYLUB GLY 151, 501, 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form. Gears Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds. Pneumatic installations Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C). Seals Lubricating and sealing grease for various types of seals. The POLYLUB GLY 151, 501 and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.

    Learn More

    Starting at: Excl. Tax: £419.34 Incl. Tax: £507.40

  • Klüber Unisilkon GLK 112

    Klüber UNISILKON GLK 112

    Special grease for Bowden cables, seals and plastics

    Application Klüber UNISILKON GLK 112

    UNISILKON GLK 112 is primarily used for the lubrication of rubber/metal, plastic/metal or plastic/plastic friction pairings. Possible applications are in slideways, seals (also EPDM), Bowden cables. In such applications, UNISILKON GLK 112 reduces friction, prevents squeaking noises and forms a protective layer against atmospheric attack on rubber and plastics. UNISILKON GLK 112 can be used in many components where lifetime lubrication is required.

    Learn More

    Starting at: Excl. Tax: £437.52 Incl. Tax: £529.40

  • Klüber BARRIERTA L 25 DL

    Klüber BARRIERTA L 25 DL

    Special lubricating grease for the lubrication of sensitive plastics and elastomers

    Application Klüber BARRIERTA L 25 DL

    BARRIERTA L 25 DL is preferably used for lubricating seals in train doors. It has also been used as a special lubricant for optical equipment for many years.

    Learn More

    Starting at: Excl. Tax: £466.44 Incl. Tax: £564.39

  • Klüber BARRIERTA L 55/1

    Klüber BARRIERTA L 55/1

    High-temperature long-term greases

    Application Klüber BARRIERTA L 55/1

    Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include: – conveyors (load and turn rollers) – kiln cart wheel bearings – calender bearings – fan bearings – chain bearings in film stretching stenters BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended. Friction points under the influence of media BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases. In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in – valves, fittings and installations e.g. in the chemical industry – pneumatic components – level gauges, e.g. for fuels or chemicals – seals (static, dynamic) – extraction systems Food-processing and pharmaceutical industries All BARRIERTA L 55 greases are registered as NSF-H1 and are therefore in compliance with FDA 21 CFR § 178.3570. The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant. White-coloured BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in – automatic baking ovens – cooking or frying lines – conveyor systems Plastic-plastic friction points BARRIERTA L 55 greases – irrespective of NLGI grade - are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf. We recommend testing lubricant compatibility with the materials in question prior to series application.

    Learn More

    Starting at: Excl. Tax: £1,214.31 Incl. Tax: £1,469.32

  • Klüber BARRIERTA KM 192

    BARRIERTA KM 192

    High-temperature and long-term lubricants with good resistance to low temperatures

    Application BARRIERTA KM 192

    Rolling bearings and guideways BARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads. Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload low-power drive units, while on the other hand they withstand temperatures as high as 200°C and beyond. BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering. Valves and seals The BARRIERTA K greases good temperature resistance and their compatibility with plastics and elastomers – which is typical of PFPE lubricants – make them highly suitable for the lubrication of engine valves and seals as are found in hydraulic cylinders. BARRIERTA K greases enable long runtimes with low noise generation and low friction coefficients. The resistance of BARRIERTA KM 192 against brake fluids, type DOT 3, 4, 5 and 5.1, has been confirmed in an individual test. Compatibility with elastomers and plastics BARRIERTA K grease stand out for their neutral behaviour towards elastomers and plastics. Owing to the many different varieties of elastomers and plastics and varying operating conditions, we recommend checking their compatibility with the component material prior to series application.

    Learn More

    Starting at: Excl. Tax: £1,763.23 Incl. Tax: £2,133.51

  • Klüber BARRIERTA I EL-102

    BARRIERTA I EL-102

    High-temperature greases with good long-term characteristics

    Application BARRIERTA I EL-102

    Rolling and plain bearings operating at elevated temperature BARRIERTA I greases attain long service lives when used in rolling and plain bearings operating under high thermal stress. The fine thickener and the high oil content enable smooth running of bearings also at high speeds and ensure a long life of the lubricated components. Typical fields of application are in film stretchers; textile stenter frames; precision engineering; clean-room engineering (e.g. microchip manufacture) The low vapour pressures of BARRIERTA I greases make them also recommendable for use in fine to ultra-high vacuum. Electrical contacts BARRIERTA I EL-102 and BARRIERTA I MI-202 have proven successful for the long-term lubrication of electrical contacts in high and medium-voltage switchboards. Component tests have shown that plug and unplug forces are consistent without unduly influencing transition resistance. There are no known decomposition products that would have an insulating effect on the contacts. Behaviour towards plastics and elastomers BARRIERTA I greases of all viscosity grades are widely neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless, compatibility with the materials should be tested, especially prior to series application

    Learn More

    Starting at: Excl. Tax: £3,892.15 Incl. Tax: £4,709.50

14 Item(s)

Set Descending Direction
per page