Compressor

Shell Corena S3 R46 (Previous Name: Corena S2 R46 / Comptella 46)

Premium Screw Compressor Oil

Benefits of the Corena S3 R 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 R 46 is a high-performance compressor oil for the lubrication of rotary vane pumps and screw compressors. With the additive system used, Shell Corena S3 R 46 offers excellent protection and very good performance at oil change intervals up to 4000 hours, under certain conditions even up to 6000 hours

Please note ! Price Shell Corena S3 R 46 drops automatically with larger quantities.

TOTAL DACNIS LD 46

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 46

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 46 drops automatically in larger quantities.

TOTAL DACNIS 46

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 46

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 46 drops automatically in larger quantities.

Mobil Rarus 425

Lubricating oil for air piston compressors

Main applications of Mobil Rarus 425 are:

• + Carters and cylinders in reciprocating compressors
• + Rotating rotary compressors
• + Rotary impeller compressors
• + Axial and centrifugal compressors
• + Compressors with critical gears and bearings
• + Compressors in fixed and mobile installations

Please note ! Price Mobil Rarus 425 drops automatically with larger quantities.

TOTAL LUNARIA NH 46

Additive enhanced hydrocracked mineral oil for ammonia (R 717) refrigerating compressors.

Applications TOTAL LUNARIA NH 46

• Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
• Hydrocracked technology of base oils to improve oil drain interval
• Field of application : evaporator temperature down to -30°C.

Your advantage! Price of TOTAL LUNARIA NH 46 drops automatically in larger quantities.

TOTAL DACNIS SH 46

PAO Synthetic oils for rotary air compressors.

Applications TOTAL DACNIS SH 46

• Lubrication and cooling of the following types of air compressors: - rotary screw compressors (ISO VG 32, 46, 68) - reciprocating compressors (ISO VG 100).
• Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.
• Recommended for the lubrication of gears, plain and roller bearings working under severe conditions, where a CKS level is required.

Your advantage! Price of TOTAL DACNIS SH 46 drops automatically in larger quantities.

Shell Corena S4 R 46 (Formerly Shell Corena AS 46)

The top in synthetic screw compressor oil

Benefits of Shell Corena S4 R 46 are:

• + 1.5x longer oil life than Corena S3 R
• + No deposits at high operating temperatures
• + Excellent water-separating power
• + Best anti-wear properties improve the life of the compressor
• + Excellent air separation and minimum foaming

Shell Corena S4 R 46 is a synthetic lubricating oil specially developed for lubrication of oil-injected rotary screw compressors for air with one or two stages.

Note ! Price Shell Corena S4 R 46 drops automatically with larger quantities.

Mobil Rarus SHC 1025

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1025 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1025 drops automatically with larger quantities.

CASTROL Aircol SR 46

Synthetic air compressor lubricant

Application CASTROL Aircol SR 46

Aircol SR is suitable for use in oil flooded rotary screw compressors and is classified as follows: DIN 51506 classification- VDL; ISO 6743/3-DAG, DAH and DAJ for rotary air compressors. Aircol SR grades meet the requirements of: Atlas Copco 8000 hour oil drain interval; Kaeser

Klüber Summit SH 46

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 46

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber Summit DSL 46

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 46

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Klüber Summit SH 100

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 100

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Shell Refrigeration Oil S2 FR-A 46

Refrigerator Compressor Lubricant

Application Shell Refrigeration Oil S2 FR-A 46

Refrigerator compressors · Shell Refrigeration Oil S2 FR-A is recommended for use in open, semi-open and hermetic compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Shell Refrigeration Oil S2 FR-A is recommended for use with ammonia (R717) based refrigeration systems where it offers excellent performance, even under high compressor discharge temperatures, or down to evaporation temperatures of -30°C. It can also be used in systems using hydrocarbons such as propane (R290). Shell Refrigeration Oil S2 FR-A is not recommended for use with CFC, HCFC or HFC refrigerants such as R12, R22 or R134a.