Award-winning Technical experts!

Free delivery for Barrels
( > 150 Kilo )

Same day dispatch
+ 850 Products in stock

Neat oil buy and save

Buy Neat oil: low prices and FREE delivery for Barrels (>150 kilo) in the full UK at Olieonline.co.uk

11 Item(s)

Set Descending Direction
per page

  • Houghton Garia 405 M-32

    Houghton Garia 405 M-32

    Garia 405 M-32 is a neat cutting oil. It is commonly used for machining higher alloyed steels, aluminum and magnesium alloys.

    Properties

    Garia 405 M-32 is a chlorine free product. It is free of heavy metals and has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and antiwear additives which give the oil high load carrying properties.

    Due to its active sulphur content, the oil may discolor yellow metals.

    Applications

    Garia 405 M-32 is recommended for general machining operations such as turning, drilling and gear hobbing on steel of low to medium tensile strength, aluminum and magnesium alloys. It is also suitable for grinding where higher viscosity is required, e.g. thread grinding.

     

    Learn More

    Starting at: Excl. Tax: £99.31 Incl. Tax: £120.17

  • Houghton Garia 601 M-22

    Houghton Garia 601 M-22

    It is based on hydro treated mineral oils with a low aromatic content.It's formulated to a combination of polar, extreme pressure and anti-wear additives.

    Properties

    Its composition gives the oil high load carrying properties. Its high additive content and controlled extreme pressure properties allow high rates of metal removal, which results in reduced machining costs.

    The oil provides good tool life and excellent surface finish of the machined work pieces. Efficient anti mist additives reduce mist in the air.

    Due to its active sulphur content, the oil may discolor yellow metals.

    Application

    Garia 601 M-22 is recommended for machining high alloyed steels, stainless, heat resistant or austenitic steels and aluminum or magnesium alloys. The oil gives excellent results with many difficult operations such as broaching, deep-hole drilling, tapping, shaping or shaving of gears.

    Learn More

    Starting at: Excl. Tax: £112.39 Incl. Tax: £135.99

  • Houghton Garia 603 S-15

    Houghton Garia 603 S-15 

    Neat Cutting Oil for Broaching and Severe Machining.

    GARIA 603 S-15 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

    GARIA 603 S-15 contains active sulphur and may discolour yellow metals.

    The oil is zinc and chlorine free.

    Applications:

    GARIA 603 S-15 is a high performance product for severe operations as well as for difficult to machine materials.

    GARIA 603 S-15 is designed for deep drilling with BT A. Ejector and gun drills. The oil has proven performance for severe broaching e.g. for internal broching of planetary gear rings.

    Approved by Klingelnberg for Titanium grinding.

    Learn More

    Starting at: Excl. Tax: £121.44 Incl. Tax: £146.94

  • Houghton Macron 205 M-8

    Houghton Macron 205 M-8

    Properties

    Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

    Macron 205 M-8 is zinc and sulphur free.

    Applications

    Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

    Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

    Macron  205 M-8 has higher viscosity compared to other typical honing oils.

    Learn More

    Starting at: Excl. Tax: £926.27 Incl. Tax: £1,120.79

  • Houghton Macron 400 M-32

    Houghton Macron 400 M-32

    Properties

    Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

    Macron 400 M-32 is free from zinc, chlorine and active sulphur.

    Applications

    Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

    Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.

    It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.

    MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

    MACRON 400 M-32 is free from zinc, chlorine and active sulphur. 

    Advantages:

    • Increased productivity - reduced machine downtime.
    • Reduced cost - long sump life.
    • Secure handling - fulfills HLP 1 CLP standards.
    • Secure handling - high EHS standard.
    Learn More

    Starting at: Excl. Tax: £989.32 Incl. Tax: £1,197.08

  • Houghton Garia 404 M-10

    Houghton Garia 404 M-10

    Properties

    Garia 404 M-10 is a neat cutting oil for machining high alloyed steels, aluminum and magnesium alloys. Garia 404 M-10 is chlorine free, free of heavy metals and it has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and anti-wear additives which gives the oil high load carrying properties. Due to its active sulphur content, the oil may discolor yellow metals.

    Applications

    Garia 404 M-10 is recommended for:

    Grinding

    Deep-hole drilling

    Taping or broaching of low to medium alloyed steels

    Gear hobbing

    Machining on automatic lathes

    Garia 404 M-10 is used neat as supplied.

     

    Learn More

    Starting at: Excl. Tax: £993.09 Incl. Tax: £1,201.64

  • Houghton Garia 405 M-22

    Houghton Garia 405 M-22

    Properties

    GARIA 405 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar. extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

    GARIA 405 M-22 contains active sulphur and may discolour yellow metals.

    The oil is zinc and chlorine free.

    Applications

    GARIA 405 M-22 is the universal oil for the gear shop. It shows excellent performance for the gear grinding as well as for gear hobbing and shaping operations.

    GARIA 405 M-22 is used also for the machining of steel and cast iron on automatic turning lathes.

    Approvals

    Hofler and Klingelnberg.

    Learn More

    Starting at: Excl. Tax: £998.42 Incl. Tax: £1,208.09

  • Houghton Macron 2429 S-8

    MACRON 2429 S-8

    It is based on HC hydro crack base oil technology with very low aromatic content. A combination of polar, extreme pressure and anti-wear addivies provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

    Properties

    MACRON 2429 S-8 is free from zinc, chlorine and active sulphur.

    Applications

    MACRON 2429 S-8 main application is for grinding cemented carbide with diamond wheels. The product is also suitable for grinding steel with CBN and ceramic wheels at high cutting speeds. The selection of additives along with low viscosity allows finest filtration even below 1 pm mesh.

    MACRON 2429 S-8 is inhibited against leaching of cobalt.

    Approvals

    Product is approved by Waiter, Schutte, Junker, Transor.

     

     

    Learn More

    Starting at: Excl. Tax: £1,002.46 Incl. Tax: £1,212.98

  • Houghton Macron 2425 S-14

    Houghton Macron 2425 S-14

    Properties

    Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

    Applications

    Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

    Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

    Approvals

    Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

     

     

    Learn More

    Starting at: Excl. Tax: £1,005.09 Incl. Tax: £1,216.16

  • Houghton Garia 602.02 M-15

    Houghton Garia 602.02 M-15

    Properties

    Houghton’s Garia series line of neat cutting oils contain active chemistry for medium to severe cutting of aluminum, cast iron, steel and stainless steel. Additives ensure long sump life and resistance to dilution with tramp oils.

    The oils show excellent results by working with many difficult operations like broaching, deep-hole drilling, tapping, shaping or shaving of gears. 

    Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubrication providing  very high efficiency combined with minimum wear of cutting heads and drill guides.

    Chlorine Free
    Low aromatics 
    Low oil mist and evaporation 
    Good wetting properties
    Free of heavy metals

    Houghton Garia 602.02 M-15 is a cutting oil that can be used for machining of a wide variety of materials, such as cast iron, copper alloys, aluminum alloys, steel alloys, stainless steel, acid-and heat-resistant steels.


    Houghton 602.02 Garia M-15 was designed for difficult machining operations such as deep drilling, drilling, reaming, threading, grinding, broaching and gear cutting on the above mentioned materials. Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubricity thereby providing  high efficiency combined with minimum wear of cutting heads and drill guides.

    Learn More

    Starting at: Excl. Tax: £1,014.11 Incl. Tax: £1,227.07

  • Houghton Garia 601 M-12

    Houghton Garia 601 M-12

    Properties

    GARIA 601 M-12 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces

    Garia 601 M-12 and M-22 are neat cutting oils for machining of high alloy steels (stainless,heat resistant, austenitic, etc.) and aluminium ormagnesium alloys.

    The oils show excellent results in working with many difficult operations like broaching, deep-hole drilling, tapping, shaping,and shaving of gears.

    • Garia 601 M-12 and M-22 products are also very good grinding oils.
    • Garia 601 M-12 and M-22 contain active sulphur - there is a risk of staining of yellow metals.
    • Garia 601 M-12 and M22 are free of chlorine and heavy metals.

    Approved by Kay's Engineering (Eldorado machines) for gun drilling.

    Learn More

    Starting at: Excl. Tax: £1,025.64 Incl. Tax: £1,241.02

11 Item(s)

Set Descending Direction
per page

Neat oil

Minimal Price: £99.31

Questions about the right lubricant? Please contact the expert by email

Info@OlieOnline.co.uk or call us +31 88 654 3 654