Compressor Piston Oil

Shell Corena S2 P 100 Previously Corena P100

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 100 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 100 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 100 drops automatically with larger quantities.

Shell Corena S2 P 68 Previously Corena P68

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 68 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 68 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 68 drops automatically with larger quantities.

Shell Corena S2 P 150 Previously Corena P150

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 150 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 150 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 150 drops automatically with larger quantities.

TOTAL DACNIS 32

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 32

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 32 drops automatically in larger quantities.

TOTAL DACNIS 68

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 68

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 68 drops automatically in larger quantities.

TOTAL DACNIS 100

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 100

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 100 drops automatically in larger quantities.

TOTAL DACNIS LD 68

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 68

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 68 drops automatically in larger quantities.

TOTAL DACNIS 150

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 150

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 150 drops automatically in larger quantities.

Mobil Rarus 424

Lubricating oil for air piston compressors

Main applications of Mobil Rarus 424 are:

• + Carters and cylinders in reciprocating compressors
• + Rotating rotary compressors
• + Rotary impeller compressors
• + Axial and centrifugal compressors
• + Compressors with critical gears and bearings
• + Compressors in fixed and mobile installations

Please note ! Price Mobil Rarus 424 drops automatically with larger quantities.

Mobil Rarus 425

Lubricating oil for air piston compressors

Main applications of Mobil Rarus 425 are:

• + Carters and cylinders in reciprocating compressors
• + Rotating rotary compressors
• + Rotary impeller compressors
• + Axial and centrifugal compressors
• + Compressors with critical gears and bearings
• + Compressors in fixed and mobile installations

Please note ! Price Mobil Rarus 425 drops automatically with larger quantities.

Mobil Rarus 426

Lubricating oil for air piston compressors

Main applications of Mobil Rarus 426 are:

• + Carters and cylinders in reciprocating compressors
• + Rotating rotary compressors
• + Rotary impeller compressors
• + Axial and centrifugal compressors
• + Compressors with critical gears and bearings
• + Compressors in fixed and mobile installations

Please note ! Price Mobil Rarus 426 drops automatically with larger quantities.

Mobil Rarus 427

Lubricating oil for air piston compressors

Main applications of Mobil Rarus 427 are:

• + Carters and cylinders in reciprocating compressors
• + Rotating rotary compressors
• + Rotary impeller compressors
• + Axial and centrifugal compressors
• + Compressors with critical gears and bearings
• + Compressors in fixed and mobile installations

Please note ! Price Mobil Rarus 427 drops automatically with larger quantities.

Mobil Rarus 429

Lubricating oil for air piston compressors

Main applications of Mobil Rarus 429 are:

• + Carters and cylinders in reciprocating compressors
• + Rotating rotary compressors
• + Rotary impeller compressors
• + Axial and centrifugal compressors
• + Compressors with critical gears and bearings
• + Compressors in fixed and mobile installations

Please note ! Price Mobil Rarus 429 drops automatically with larger quantities.

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL Aircol PD 68

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 68

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

Q8 Schumann 68

Ultra-high performance compressor oil

Applications Q8 Schumann 68

All reciprocating- (piston), rotary screw- and vane type compressors Single- and multistage air compressors in both stationary and mobile applications Compressor units operating under severe conditions as well as systems with critical parts such as gears and bearings

Your advantage! Price of Q8 Schumann 68 drops automatically in larger quantities.

Q8 Schumann G 150

Applications Q8 Schumann G 150

Industrial gear oil based on high quality synthetic PAO base oil

Your advantage! Price of Q8 Schumann G 150 drops automatically in larger quantities.

Klüber Summit PS 300

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 300

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Shell Corena S4 P100 compressor oil (Formerly Shell Corena AP 100)

High-quality synthetic lubricating oil for compressed air piston compressors

Main uses of Shell Corena S4 P100 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S4 P 100 is a high-quality synthetic oil composed of synthetic esters and unique high-quality additives. It has been developed for excellent lubrication of compressed air suction compressors, in which discharge temperatures may exceed 220C.

Please note ! Price Shell Corena S4 P 100 drops automatically with larger quantities.