Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Motor oil

Buy the best engine oil for the lowest price! OlieOnline is an engine oil specialist whether it is oil for your car, motorcycle, truck, bus or boat.

Engine oil for

Click on the application for faster selection

7 Item(s)

Set Descending Direction
per page

  • Castrol Hyspin AWS 100

    CASTROL Hyspin AWS 100

    Anti-wear Hydraulic Oil

    Application CASTROL Hyspin AWS 100

    Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials. Hyspin AWS is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM. Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 2; Cincinnati Lamb (Milacron) P 68-69-70; Denison (Parker Hannafin); HF-0 US Steel 126 & 127; Eaton (formerly Vickers) I-286-S & M-2950-S; MB – Approval 341.

    Learn More

    Starting at: Excl. Tax: £128.05 Incl. Tax: £154.94

  • Castrol Aircol PD 100

    CASTROL Aircol PD 100

    Rotary Screw Compressor Lubricant

    Application CASTROL Aircol PD 100

    Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

    Learn More

    Starting at: Excl. Tax: £138.52 Incl. Tax: £167.61

  • Castrol Optigear BM 100

    CASTROL Optigear BM 100

    High Performance Gear Oils

    Application CASTROL Optigear BM 100

    Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

    Your advantage! Price of CASTROL Optigear BM 100 drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £229.25 Incl. Tax: £277.39

  • Castrol Aircol SN 100

    CASTROL Aircol SN 100

    Synthetic Air Compressor Lubricant

    Application CASTROL Aircol SN 100

    Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

    Learn More

    Starting at: Excl. Tax: £314.44 Incl. Tax: £380.47

  • Castrol Optigear Synthetic 800/1000

    CASTROL Optigear Synthetic 800/1000

    Synthetic Gear Oils

    Application CASTROL Optigear Synthetic 800/1000

    The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

    Your advantage! Price of CASTROL Optigear Synthetic 800/1000 drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £326.25 Incl. Tax: £394.76

  • Castrol Optileb GT 100

    CASTROL Optileb GT 100

    Synthetic NSF H1 gear lubricant

    Application CASTROL Optileb GT 100

    For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

    Learn More

    Starting at: Excl. Tax: £369.25 Incl. Tax: £446.79

  • Castrol Optigear Synthetic 800/100

    CASTROL Optigear Synthetic 800/100

    Synthetic Gear Oils

    Application CASTROL Optigear Synthetic 800/100

    The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

    Your advantage! Price of CASTROL Optigear Synthetic 800/100 drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £648.25 Incl. Tax: £784.38

7 Item(s)

Set Descending Direction
per page