Mobil

Mobilgear 600 XP 320

Mobil Gear Oils

Mobil Gear Oils

Most important applications of Mobilgear 600 XP 320 are:

• + Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• + Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• + Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds.
• + Mobilgear 600 XP 320 is approved by Siemens AG for use in Flender gearboxes

Pay attention! Price of Mobilgear 600 XP 320 drops automatically with higher volumes.

Mobil ATF 320

Mobil Passenger Vehicle Lube

Automatic Transmission Fluid

Most important applications of Mobil ATF 320 are:

• + Mobil ATF 320 is recommended for most passenger car and commercial automatic transmissions. It is also suitable for power steering systems, hydraulic applications and some manual transmissions where an automatic transmission fluid is specified.

Pay attention! Price of Mobil ATF 320 drops automatically with higher volumes.

Mobil Vacuoline 537

Circulating Oils

Application Mobil Vacuoline 537

These oils are intended primarily for the lubrication of plain bearings, roller bearings, parallel shaft and bevel gearing. They are suitable as multipurpose lubricants in systems not subject to shock loading and which do not require extreme pressure performance. The Mobil Vacuoline 500 series possess good demulsibility that is retained under conditions of severe water contamination. Mobil Vacuoline 500 series are used in applications using splash, bath and ring oil arrangements and all other application methods involving pumps, valves and auxiliary equipment. They are recommended for use in hydraulic systems where higher viscosity oils are specified. They are particularly resistant to the effects of prolonged high temperature exposure and perform well in circulating systems with short oil residence times. Typical applications include: No Twist Rod Mills. Moderate duty spur, bevel, helical and herringbone gear units. Circulating systems. Mobil Vacuoline 525, 528, 533 can also be used in hydraulic systems employing gear, vane, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required. Certain compressors and vacuum pumps handling air and inert gases provided the discharge temperatures do not exceed 150oC , not suitable for breathing air compressors

Mobil SHC Cibus 320

Mobil Industrial H1

High Performance NSF H1 Registered Lubricants for Food Machinery

Most important applications of Mobil SHC Cibus 320 are:

• + Mobil SHC Cibus Series lubricants are recommended for use in a wide variety of hydraulic, compressor, gear and bearing applications within food and beverage processing, packaging and pharmaceuticals. The products are effective in many applications including those where maintenance costs of component replacement, system cleaning and lubricant changes are high.
• + Mobil SHC Cibus 320 are intended for gear, bearing and circulating systems

Pay attention! Price of Mobil SHC Cibus 320 drops automatically with higher volumes.

Mobil Glygoyle 320

Polyalkylene Glycol (PAG) Gear, Bearing and Compressor Lubricant

Application Mobil Glygoyle 320

The Mobil Glygoyle Series is specifically designed for the lubrication of worm gears, especially for heavy-duty, severe service applications, both in food-grade and non food-grade applications. Additionally, the product family has also proven to be an excellent lubricant for many types of industrial gears and anti-friction bearing applications under severe service conditions. Additionally, their poor miscibility with hydrocarbons makes the lower viscosity grades especially effective in hydrocarbon gas compression applications because of the reduced viscosity dilution that occurs in this application versus hydrocarbon based compressor oils. The Mobil Glygoyle Series is used for the lubrication of filled for life gearboxes and heavy-duty worm gears, other industrial gearing in a wide variety of applications, lubrication of plain and rolling contact bearings, and most types of compressors. Specific applications include: Filled for life gearboxes, especially high ratio/low-efficiency worm gears. Worm gear applications such as those used in conveyers, escalators, material handling, press drives, packaging machinery, ski lifts, agitators and mixers. Other gear and bearing applications in the cement, metalworking, plastics, food and textile finishing industries. Gas Compression utilizing reciprocation, rotary, screw, and centrifugal type compressors in operating conditions beyond the capabilities of other synthetic lubricants and mineral oils

Mobilgear™ SHC XMP 320

• Wind turbines, especially highly loaded and shock loaded units, remotely located units and extreme temperature environments
• Plastic extruder gearboxes
• Modern, highly loaded gearboxes used in the paper, steel, oil, textile, lumber and cement industries where gear protection and optimum oil life are required.
  
  

Synthetic industrial gear oil 320 (ISO VG)

Mobil SHC Gear 320 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 320 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 320 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 320 drops automatically with higher volumes.

Product Description Mobil SHC Gear 320

Mobil Vacuoline 137

Circulating Oils

Application Mobil Vacuoline 137

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination