Klüber
-
Klübersynth GH 6-220
Klübersynth GH 6-220
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-220
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Learn More -
Klübersynth GH 6-460
Klübersynth GH 6-460
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-460
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Learn More -
Klüber LAMORA D 68
Klüber LAMORA D 68
Lubricating oils for slideways and guideways
Application Klüber LAMORA D 68
LAMORA D oils are especially suited for the lubrication of heavily loaded slideways with low feed rates. LAMORA D oils have been tried and tested for the lubrication of slideways and guideways in modern machining centres, milling machines, lathes and other machine tools. As they show good compatibility with water-miscible machining fluids and cooling lubricants, LAMORA D oils can be used in applications where they may mix with aqueous media.
Learn More -
Klübersynth GH 6-100
Klübersynth GH 6-100
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-100
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Learn More -
Klübersynth GH 6-1000
Klübersynth GH 6-1000
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-1000
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Learn More -
Klübersynth GH 6-680
Klübersynth GH 6-680
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-680
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Learn More -
Klüber Klüberoil GEM 1-68 N
Klüber Klüberoil GEM 1-68 N
High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology
Application Klüber Klüberoil GEM 1-68 N
Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.
Learn More -
Klüber Summit SH 68
Klüber Summit SH 68
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 68
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Learn More -
Klübersynth GEM 4-1000 N
Klübersynth GEM 4-1000 N
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Application Klübersynth GEM 4-1000 N
Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.
Learn More -
Klübersynth G 4-68
Klübersynth G 4-68
Synthetic high-performance gear oil
Application Klübersynth G 4-68
Klübersynth G 4 was especially developed for the lubrication of spur, bevel and planetary gears. It can also be used for plain and rolling bearings.
Learn More -
Klüberoil GEM 1-680 N
Klüberoil GEM 1-680 N
High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology
Application Klüberoil GEM 1-680 N
Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.
Learn More -
Klüber Summit Ultima 68
Klüber Summit Ultima 68
Synthetic air compressor oils for oil change intervals up to 12,000 operating hours
Application Klüber Summit Ultima 68
Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.
Learn More -
Klüber Summit LCG 68
Klüber Summit LCG 68
Synthetic compressor oils for acidic and reactive gases such as landfill and biogases.
Application Klüber Summit LCG 68
The Klüber Summit LCG 68 was developed for application in screw-type compressors working with natural gases or the reactive and corrosive gases encountered in biogas plants, refineries, EOR processes or the chemical industry. Klüber Summit LCG 68 compressor oils do not contain sulphur or any other elements that might react with chlorine-containing components or acidic gases. They can also be used with gases containing chlorine where mineral oils, esters or polyglycols are not suitable for application. Klüber Summit LCG 68 compressor oils protect surfaces against the corrosive effects of acidic gases such as hydrogen sulphide or carbon dioxide. To select the right viscosity, the composition of the gas flow and all other operating conditions have to be known in detail
Learn More -
Klüber ISOFLEX LDS 18 SPECIAL A
Klüber ISOFLEX LDS 18 SPECIAL A
Dynamically light, long-term lubricating grease
Application Klüber ISOFLEX LDS 18 SPECIAL A
ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.
Learn More -
Klüber Klüberbio EG 2-68
Klüber Klüberbio EG 2-68
Environmentally compatible, synthetic high-performance gear oils
Application Klüber Klüberbio EG 2-68
Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.
Learn More -
Klübersynth GH 6-22
Klübersynth GH 6-22
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-22
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Learn More -
Klübersynth G 4-130
Klübersynth G 4-130
Synthetic high-performance gear oil
Application Klübersynth G 4-130
Klübersynth G 4 was especially developed for the lubrication of spur, bevel and planetary gears. It can also be used for plain and rolling bearings.
Learn More
Küber lubricants
High-performance Klüber oils and greases for optimal lubrication of assets. Resulting in higher reliability, less time spent on maintenance and lower lubricant consumption. With a lower cost to operate, fewer breakdowns, more performance, more output and a better result. Also food safe or biodegradable if required, with the official registrations and certifications.
What makes Klüber lubricants so good?
Klüber is the specialist for special greases and oils. I think there is no other brand with such a broad portfolio of lubricating greases as Klüber. Kluber's portfolio already includes more than 10,000 products. Therefore, you often see very high-quality and very specific products in their portfolio. The price of this specialist in lubricants is high, but fortunately very small packages are available.
My machine supplier prescribes Klüber lubricants. Should I use these?
Klüber has an extremely good relationship with these OEMs and has often looked very closely at the needs and requirements of these machine builders. Therefore, it is not always obvious to select a general product. In addition, warranty also plays an important role. If the consumption is not very high, we would save you the trouble of looking for an alternative.
Where can I buy Klüber oil in United Kingdom?
The easiest way is online! OlieOnline delivers Klüber oil and greases in the whole Benelux. They are specialised in business use, but the private individual can also buy directly from the wholesaler.
- Remove This Item Viscosity: 68 mm2/sec
- Category
-
- Klüberbio (1)
- Klüberoil (2)
- Klübersynth G (2)
- Klübersynth GEM (1)
- Klübersynth GH (6)
- Klüber Lamora (1)
- Klüber Summit (4)
- Viscosity
-
- 100 mm2/sec (7)
- 1000 mm2/sec (1)
- 100W (4)
- 150 mm2/sec (6)
- 1500 mm2/sec (2)
- 220 mm2/sec (7)
- 32 mm2/sec (2)
- 320 mm2/sec (5)
- 46 mm2/sec (5)
- 460 mm2/sec (10)
- 68 mm2/sec (17)
- 680 mm2/sec (1)
- NLGI 0 (2)
- NLGI 00 (1)
- NLGI 1 (3)
- NLGI 2 (6)
- Brand
-
- Klüber (17)
| 9+ | Our customers value us  |
 Ian Adair |
"We like your site, it shows that you are experts in lubricants!" |
 Cris Scullion |
"You deliver quicker than our previous UK supplier!" |
| Stuart Wyatt |
"Surprise to us! We paid to much in the past" |
| View more reviews | |
