Klüber

Klüber Klübersynth BEM 44-4600

Fully synthetic high-performance fluid grease for a wide service temperature range

Application Klüber Klübersynth BEM 44-4600

Your technical challenges may be found in general industrial equipment, machine tools, heavy industry equipment (mining and cement), robotics, chemical and agricultural machinery. Examples are: Crushers, vertical roller mills, hammer mills; Mobile drilling equipment; Cranes, e.g. harbour or mining; Mixer and reactor drives; Harvesting machines; Conveyor belt drives

Klübersynth GH 6-460

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-460

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Kluber Klübersynth UH1 6

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology

Application Kluber Klübersynth UH1 6

Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.

Application notes Kluber Klübersynth UH1 6

Klübersynth UH1 6 can be applied by means of immersion, immersion circulation or injection.The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible. When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.

Klüber Klüberoil 4 UH1-460 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-460 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klüberpress HF 2-102

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-102

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber Klüberpharma UH1 4-460

Special synthetic lubricating oils for the pharmaceutical industry

Application Klüber Klüberpharma UH1 4-460

Klüberpharma UH1 4-220/4-460 oils are used for the lubrication of the upper and lower punches and bronze guides in tablet presses. Material / friction combinations: Upper punches made of hardened steel (e.g. 1.23.63) operating against cast iron (e.g. GGG 40). Guide rails made of bronze (e.g. 2.0980.03) Lower punches made of hardened steel (e.g. 1.23.63) operating against cast iron (e.g. GGG 40).

Klüber Klüberoil GEM 1-460 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-460 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klüber Klübersynth GHE 6-460

Synthetic gear and circulating oils

Application Klüber Klübersynth GHE 6-460

Klübersynth GHE 6 oils were specially developed for the lubrication of spur, bevel, planetary and worm gears. Klübersynth GHE 6 oils are also used for the lubrication of rolling and plain bearings as well as all kinds of toothed couplings.

Klüber Klübersynth EG 4-460

Synthetic high-performance gear oil

Application Klüber Klübersynth EG 4-460

Klübersynth EG 4 was especially developed for the lubrication of heavily loaded spur, bevel and planetary gears. It can also be used for the lubrication of worm gears. Klüberoil EG 4 can also be selected for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.