Klübersynth

Klüber Klübersynth VR 69-252

Lubricating grease for drinking water fittings with EPDM elastomers

Application Klüber Klübersynth VR 69-252

Klübersynth VR 69-252 is suitable for the lubrication of all friction points subject to mechanical loads in spindle heads with EPDM elastomers, check and control valves, shower and heating fittings, and generally for the lubrication of seals that require a grease compatible with EPDM and in compliance with statutory drinking water regulations.

Learn More

Klüber Klübersynth BEM 44-4600

Fully synthetic high-performance fluid grease for a wide service temperature range

Application Klüber Klübersynth BEM 44-4600

Your technical challenges may be found in general industrial equipment, machine tools, heavy industry equipment (mining and cement), robotics, chemical and agricultural machinery. Examples are: Crushers, vertical roller mills, hammer mills; Mobile drilling equipment; Cranes, e.g. harbour or mining; Mixer and reactor drives; Harvesting machines; Conveyor belt drives

Learn More

Klüber Klübersynth PEG 46-121

Special greases for the lubrication of enclosed gear drives

Application Klüber Klübersynth PEG 46-121

Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives. Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.

Learn More

Klüber Klübersynth CH 2-100 N

High-temperature chain oils

Application Klüber Klübersynth CH 2-100 N

The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards

Learn More

Klüber Klübersynth MR 96-31

Special lubricant compatible with many elastomers and plastics

Application Klüber Klübersynth MR 96-31

Klübersynth MR 96-31 is used particularly for the lubrication of friction pairs involving non-polar polymers such as PP or PE, and elastomers such as EPDM. The lubricant is also compatible with POM (homo- and copolymers), PBT or PA 6.6. Klübersynth MR 96-31 is used, for example, in slideways and casings made of non-polar and amorphous polymers with a low degree of crystallisation. Further application examples are: Vehicle brakes, electric parking brake, small gears.

Learn More

Klüber Klübersynth CHX 2-220

High-temperature chain oil for transport- and conveyor chains in the automotive industry

Application Klüber Klübersynth CHX 2-220

Klübersynth CHX 2-220 was developed for chain lubrication at high temperatures from 120 °C to approx. 250 °C. The product is used for the lubrication of the conveyor chain and the oven chain in cathodic immersion painting as well as for all other chain applications in the car body paint section.

Learn More

Klüber Klübersynth DB 2-68

Synthetic impregnating oils for sintered metal plain bearings

Application Klüber Klübersynth DB 2-68

Klübersynth DB 2 oils were developed for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Learn More

Klüber Klübersynth BEP 72-82

Rolling bearing grease for long-term lubrication

Application Klüber Klübersynth BEP 72-82

Klübersynth BEP 72-82 was especially developed for rolling bearings typically used in motor vehicles. Due to its performance characteristics Klübersynth BEP 72-82 can be used for the lifetime lubrication of many bearings, e.g. belt tensioner bearings (with rotating outer ring), clutch release bearings, viscous coupling bearings, drive shaft bearings, radiator fan bearings as well as deep groove ball bearings used in various types of electric motors and in all other bearings subject to high speeds and loads.

Learn More

Klüber Klübersynth BM 44-42

Special grease for actuators, rolling bearings and free-wheels

Application Klüber Klübersynth BM 44-42

Klübersynth BM 44-42 is mostly used for the long-term lubrication of actuators and rolling bearings in automotive applications. It was also developed for low-wear idling operation and reliable indexing of free-wheels and override clutches. Klübersynth BM 44-42 shows good adhesion to the lubrication point, improving long-term lubrication especially in uncapped bearings or rotating outer rings.

Learn More

Klüber Klübersynth BHP 72-102 High-temperature lubricant with extraordinary anticorrosion properties for lifetime lubrication Application Klüber Klübersynth BHP 72-102 Klübersynth BHP 72-102 has been designed for the lifetime lubrication of rolling bearings subject to high loads and alternating temperatures ranging from -40 °C to 200 °C. The product is suitable for the lubrication highly loaded rolling bearings in components close to automobile engines, e.g. bearings viscocouplings, belt tensioners, water pumps, fans, servomotors and similar applications. Klübersynth BHP 72-102 forms a stable grease collar that serves as a lubricant reservoir resistant to vibration and at the same time helps to protect the bearings against contaminants. Learn More

Klüber Klübersynth H2 C 2-260

High-temperature chain oil for spiral ovens

Application Klüber Klübersynth H2 C 2-260

Klübersynth H2 C 2-260 is intended for use on chains exposed to high temperatures in spiral ovens used in bread/bun baking as well as meat/poultry cooking. These chains are exposed to sliding and rolling friction typically prevailing in traditional roller and skate chains and their guide rails. Klübersynth H2 C 2-260 is used for a sustained temperature of 250 °C while still providing a sufficient lubricating film for the rollers, balls, pins and rails.

Learn More

Klüber Klübersynth CHM 2-220

High-temperature oils for transmission, lifting and conveyor chains

Application Klüber Klübersynth CHM 2-220

Klübersynth CHM 2 oils are suitable for transmission, lifting and conveyor chains up to approx. 250 °C in the following industries: conveyors e.g. surface coating, metal coating, white goods, furniture; drying installations e.g. rock wool or gypsum board manufacture

Learn More

Klüber Klübersynth CHM 2-100

High-temperature oils for transmission, lifting and conveyor chains

Application Klüber Klübersynth CHM 2-100

Klübersynth CHM 2 oils are suitable for transmission, lifting and conveyor chains up to approx. 250 °C in the following industries: conveyors e.g. surface coating, metal coating, white goods, furniture; drying installations e.g. rock wool or gypsum board manufacture

Learn More

Klüber Klübersynth CEH 2-100

High-temperature chain oil

Application Klüber Klübersynth CEH 2-100

Klübersynth CEH 2-100 can be used for transport and conveyor chains operating at high temperatures, e.g. during production of insulating materials. The lubricant design is aimed at applications involving high loads temperatures. Avoid ignition sources as the product's flash point is at approx. 230 °C. For oven temperatures above 230 °C, automatic fire extinguishing systems should be provided. Especially for insulating materials of high density (grade 5), this HT chain oil can effectively support reliable production processes.

Learn More

Klüber Klübersynth CH 2-220

High-temperature chain oils

Application Klüber Klübersynth CH 2-220

The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards

Learn More

h3>Klüber Klübersynth CH 2-280

Special high-temperature oil for sliding chain systems in film stretchers made by Brückner Maschinenbau

Application Klüber Klübersynth CH 2-280

Klübersynth CH 2-280 is a fully synthetic high-temperature oil that was especially developed for the requirements of conveyor chain sliding systems and pins in biaxial high-speed film stretchers. Oven temperatures may be higher than 200 °C in these applications. The machine may run at speeds up to 450 m/min.

Learn More

Klüber Klübersynth 80 KV

Synthetic high-performance gear oils for weaving machines

Application Klüber Klübersynth 80 KV

Klübersynth 50 KV, 80 KV and 100 KV are exclusively recommended by the Italian textile machine OEM ITEMA for the lubrication of gears, bearings and other sliding friction points in Leonardo-type weaving machines. For Leonardo-type weaving machines with oil coolers, ITEMA recommends Klübersynth 50 KV, and for the R 9500-type machines Klübersynth 80 KV.

Learn More

Klüber Klübersynth CTH 2-260

High-temperature oil for oil-lubricated stenter chains in the textile industry

Application Klüber Klübersynth CTH 2-260

With Klübersynth CTH 2-260, the range of Klüber Lubrication high-temperature chain oils has been consistently upgraded. The product can replace other Klüber Lubrication chain oils for high operating temperatures. It can be used for all types of oil-lubricated stenter chains, e.g. roller chains; chains or clips with ball bearings - combined lubrication of ball bearings, chain links and sliding rails; sliding chains in single-layer stenters, multi-layer stenters, festoon dryers, festoon steamers, coating installations - lubrication of sliding rails, chain links and chain pins

Learn More

Klüber Klübersynth 50 KV

Synthetic high-performance gear oils for weaving machines

Application Klüber Klübersynth 50 KV

Klübersynth 50 KV, 80 KV and 100 KV are exclusively recommended by the Italian textile machine OEM ITEMA for the lubrication of gears, bearings and other sliding friction points in Leonardo-type weaving machines. For Leonardo-type weaving machines with oil coolers, ITEMA recommends Klübersynth 50 KV, and for the R 9500-type machines Klübersynth 80 KV.

Learn More