Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Klübersynth EG 4-460 208 L

Klüber Klübersynth EG 4-460

Synthetic high-performance gear oil

Application Klüber Klübersynth EG 4-460

Klübersynth EG 4 was especially developed for the lubrication of heavily loaded spur, bevel and planetary gears. It can also be used for the lubrication of worm gears. Klüberoil EG 4 can also be selected for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Excl. Tax: £7,096.29 Incl. Tax: £8,586.51

Product Description

Details

Performance, Features & Benefits of Klüber Klübersynth EG 4-460 are:

  • High scuffing protection
  • Good wear protection
  • Excellent ageing and oxidation resistance
  • Wide service temperature range due to good viscosity-temperature behaviour
  • Low foaming tendency
  • Energy savings due to optimised friction behaviour
  • Very good corrosion protection

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Klübersynth EG 4-460

Klübersynth EG 4 is a fully synthetic high-performance gear oil based on polyalphaolefin satisfying the requirements of many gears. Klübersynth EG 4 offers a high scuffing strength of API GL-4. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The good wear protection of the gear components ensures that their calculated service life is achieved, leading to lower maintenance and repair costs. Klübersynth EG 4 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Klübersynth EG 4 is neutral towards most sealing materials such as NBR or FKM. Oil leakage leading to contamination is prevented. It also shows good demulsifying behaviour. The good viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range. Therefore, a single viscosity grade can cover both low and high temperatures in many applications. The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency. By using Klübersynth EG 4 you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.
 

Typical Characteristics

Product specifications   Method

Klüber Klübersynth EG 4-460

Article number     012223
ISO viscosity grade    DIN ISO 3448 460
AGMA number     7 EP
Lower service temperature -30 °C / -22 °F    
Upper service temperature 140 °C / 284 °F    
Density  20 °C   DIN 51757 approx. 0.88 g/cm³
Kinematic viscosity 40 °C  DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 approx. 460 mm²/s
Kinematic viscosity  100 °C DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 approx. 43.3 mm²/s
Viscosity index   DIN ISO 2909 >= 130
Pour point <= -36 °C  DIN ISO 3016  
Flash point, Cleveland, open-cup apparatus >= 200 °C DIN EN ISO 2592  
Foam test sequence I/24 °C  ASTM-D 892, ISO 6247 <= 100/10 ml
Foam test  sequence II/ 93.5 °C ASTM-D 892, ISO 6247

<= 100/10 ml

Foam test sequence III/24°C   ASTM D 892, ISO 6247 <= 100/10 ml
FZG scuffing test, scuffing load stage   DIN ISO 14635-1, A/8.3/90

>= 14

FZG scuffing test, scuffing load stage    DIN ISO 14635-1, A/16.6/90 >= 12
API scuffing load capacity    

API GL 4

FAG FE8 rolling bearing test, wear of rolling element    DIN 51819-3, D 7,5/80-80 <= 30 mg
FAG FE8 rolling bearing test, wear of cage   DIN 51819-3, D 7,5/80-80

<= 200 mg

Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original
container, approx.
    60 months

 

Application notes

Klübersynth EG 4 can be used for immersion, immersion circulation and injection lubrication. The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible. When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication. Klübersynth EG 4 is miscible with mineral oils. However, for the Klübersynth EG 4 oil to deliver its full performance, any residues of a previously used mineral oil should not exceed 5 % in quantity. For use at permanent temperatures of 80 °C max., seals made of NBR may be used. For higher temperatures, seals made of FKM should be chosen. It should be noted that elastomers from one or several manufacturers can behave differently; therefore tests should be performed. For checking the contact pattern during running-in, the inspection paint Klübertop P 39-462 Spray (Art. No. 081295) can be used.
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No