Houghton
-
Houghton Garia 405 M-32
Houghton Garia 405 M-32
Garia 405 M-32 is a neat cutting oil. It is commonly used for machining higher alloyed steels, aluminum and magnesium alloys.
Properties
Garia 405 M-32 is a chlorine free product. It is free of heavy metals and has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and antiwear additives which give the oil high load carrying properties.
Due to its active sulphur content, the oil may discolor yellow metals.
Applications
Garia 405 M-32 is recommended for general machining operations such as turning, drilling and gear hobbing on steel of low to medium tensile strength, aluminum and magnesium alloys. It is also suitable for grinding where higher viscosity is required, e.g. thread grinding.
Learn More -
Houghton Hocut 3220 stable emulsion
Houghton Adrana D 208.01 new name will change into Hocut 3220
Water miscible metalworking fluid.
Properties
Hocut 3220 is a high quality, general-purpose metalworking fluid for easy to medium duty applications on ferrous metals.
Applications:
It is recommended for easy to medium duty operations on cast iron and (low to medium alloyed) ferrous metals.
It is designed to be used on CNC machine tools, given its excellent detergent, and high wetting properties.
Hocut 3220 is suitable for all removal and grinding operations on stand-alone machines and in central systems.
Hocut 3220 can be used over a broad water hardness range. Recommendations for use: General machining.
Learn More -
Houghton Macron 400 M-32
Houghton Macron 400 M-32
Properties
Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
Macron 400 M-32 is free from zinc, chlorine and active sulphur.
Applications
Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.
Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.
It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.
MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
MACRON 400 M-32 is free from zinc, chlorine and active sulphur.
Advantages:
- Increased productivity - reduced machine downtime.
- Reduced cost - long sump life.
- Secure handling - fulfills HLP 1 CLP standards.
- Secure handling - high EHS standard.
Starting at: Excl. Tax: £1,249.25 Incl. Tax: £1,511.59
Out of stock
Quaker Houghton are two brands, aren't they?
Quaker and Houghton have merged to form Quaker Houghton. They were already two very big players in metalworking fluids and now together they are the world's largest producer of metalworking fluids.
Where does the strength of Quaker Houghton products lie?
They have a very extensive portfolio and a lot of experience and large R&D capacity. This allows them to offer metalworking fluids for Aerospace, Industry, Forming Industry and Metal Protection. The recent merger has created an overlap in the portfolio of these two giants. Thus, a portfolio realignment with name changes is to be expected.
What metalworking operations do you focus on?
OlieOnline focuses most on the following operations: Drilling, metal preservation / anti-corrosion, EDM spark machining, Grinding, honing, milling, MQL (minimum lubrication), reaming, tapping and turning. Solutions can be found with water miscible or pure oils. The right solution depends on your application.
- Remove This Item Viscosity: 32 mm2/sec
- Category
- Viscosity
-
- 10 mm2/sec (1)
- 15 mm2/sec (2)
- 22 mm2/sec (2)
- 32 mm2/sec (3)
- Brand
-
- Houghton (3)
- ACEA DIN ISO OEM
-
- DIN 51517-3 CLP (1)
- DIN 51524-2 HLP (1)
- DIN 51524-2 klasse HLP" (1)
| 9+ | Our customers value us  |
 Ian Adair |
"We like your site, it shows that you are experts in lubricants!" |
 Cris Scullion |
"You deliver quicker than our previous UK supplier!" |
| Stuart Wyatt |
"Surprise to us! We paid to much in the past" |
| View more reviews | |
