Fuchs
Incidental contact with foodstuffs
Fuchs Cassida range is the top in food-safe synthetic lubricants! See below on this page for more explanation on what is meant by incidental contact.
-
Fuchs Cassida Grease EPS 1
Cassida Grease EPS 1
Extreme pressure grease for food & beverage processing equipment
Cassida Grease EPS 1 main applications:
- Rolling element and plain bearings
- Joints, linkages and slides
- Recommended for a wide range of applications including; clay and roller element bearings.
Cassida Grease EPS 1 may also be used as protective anti-rust films and as release agents on gaskets and seals of tank closures.
Cassida Grease EPS 1 are high performance extreme pressure lubricants specially developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. Cassida Grease EPS 1 are based on an aluminium complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.
Learn More -
Fuchs Cassida Chain Oil 150 - Foodgrade
Fuchs Cassida Chain Oil 150
Chain lubricant for food & beverage processing equipment.
Fuchs Cassida Chain Oil 150 and 1000 are fully Synthetic high performance, antiwear chain oils which have been specially developed for use in machinery used in the food and beverage processing and packaging industry.
Properties
They are formulated using a careful blend of synthetic fluids and additives chosen for their ability to meet the stringent requirements of the food & beverage industry.
Certified by NSF for ISO 21469 and registered by NSF (Class H1) for use where there is potential for incidental food contact.
Products contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.
Learn More
Incidental food contact
egistered by NSF (class H1) and meets USDA H1 guidelines (1998) for lubricants for use where incidental food contact is possible.
Made only from substances permitted under US FDA Title 21 CFR 178.3570, 178.3620 and/or generally considered safe (US 21 CFR 182) for use in food grade lubricants.
In order to comply with the requirements of US 21 CFR 178.3570, contact with food should be avoided whenever possible. In case of incidental food contact, the concentration of this product in the food shall not exceed 10 parts per million (10 mg / kg food).
In locations and/or applications where local legislation does not specify maximum concentration limits, it is recommended that this same limit of 10 ppm be observed, as Fuchs Cassida products up to this concentration will not impart any undesirable taste, odour or colour to food or cause any adverse health effects.
In accordance with good manufacturing practice, use only the amount necessary for proper lubrication and take appropriate corrective action if excessive incopic contact with food is detected.
Is Fuchs oil better than other brands?
Fuchs is a German quality brand with a very extensive portfolio of lubricants for industry, from food-grade lubricants to metalworking fluids. Fuchs has a very broad portfolio which means that some lubricants may have a longer delivery time.
Is Shell Cassida the same as Fuchs Cassida?
Shell has sold the food safety Cassida portfolio to Fuchs. Shell Cassida no longer exists and is now called Fuchs Cassida. Since the acquisition, Fuchs has added several products to its portfolio, providing an even better NSF H1 lubricant range for the food industry.
Where to buy Fuchs oil in United Kingdom?
The easiest way is online directly with the specialists of OlieOnline. They know about Fuchs lubricants. Simple delivery from 1000 litre IBC tank, pallet to box of grease cartridges. Technical questions? No problem for the specialists of OlieOnline, please contact them.
- Remove This Item ACEA DIN ISO OEM: FDA 21 CFR 178.58
- Category
-
- Cassida Fluids (1)
- Cassida Grease (1)
- Viscosity
-
- 150 mm2/sec (1)
- NLGI 1 (1)
- Brand
-
- Fuchs (2)
- ACEA DIN ISO OEM
-
- ACEA A1 (1)
- BS 6713-4 HM (6)
- DIN 51506 VCL (2)
- DIN 51517-3 CLP (9)
- DIN 51517-3 klasse CLP" (1)
- DIN 51522 Q (1)
- DIN 51524-2 HLP (6)
- DIN 51524-3 HVLP (6)
- FDA 178.3620 (33)
- FDA 21 CFR 178-184. (1)
- FDA 21 CFR 178.3570 (2)
- FDA 21 CFR 178.40 (2)
- FDA 21 CFR 178.55 (1)
- FDA 21 CFR 178.56 (6)
- FDA 21 CFR 178.57 (2)
- FDA 21 CFR 178.58 (2)
- FDA 21 CFR 178.59 (1)
- FDA 21 CFR 178.60 (2)
- FDA 21 CFR 178.61 (1)
- FDA 21 CFR 178.64 (6)
- FDA 21 CFR 178.73 (1)
- FDA 21 CFR 178.75 (1)
- FDA 21 CFR 178.77 (1)
- FDA 21 CFR 178.78 (1)
- FDA 21 CFR 178.81 (1)
- FDA 21 CFR 178.83 (1)
- FDA 21 CFR 178.85 (2)
- FDA 21 CFR 178.86 (1)
- FDA 21 CFR 178.87 (1)
- FDA 21 CFR 182 (33)
- FDA CFR 178.3570 (33)
- FDA CFR 178.3570" (36)
- Halal (4)
- ISO 21469 (1)
- ISO 6743-12 L-QC (1)
- ISO 6743-12 L-QE (1)
- ISO 6743-3A L-DAJ (2)
- ISO 6743-3A L-DVC (1)
- ISO 6743-4 L-HM (6)
- ISO 6743-6 L-CKD (7)
- Koosjer (4)
- NSF H1 (3)
- NSF H1" (1)
- NSF HT1 registered (1)
- US 21 CFR 178.3570" (2)
| 9+ | Our customers value us  |
 Ian Adair |
"We like your site, it shows that you are experts in lubricants!" |
 Cris Scullion |
"You deliver quicker than our previous UK supplier!" |
| Stuart Wyatt |
"Surprise to us! We paid to much in the past" |
| View more reviews | |
